SWB 2.4 Load Capacity

[Wallace]

I have a chance collect some very cheap steel tomorrow and a web search gives me a 765kg load capacity, anyone know if that is correct on a SWB? Link is for SWB so I'm presuming yes. What i have to collect could easily be up around that weight.

LINK

[elty001]

700kg rings a bell.

[Wallace]

Originally Posted by elty001

700kg rings a bell.

Thanks, it should be ok as what I am collecting is estimated at 45-50kg a piece and maybe 16 pieces. I will take my baggage scales and check a couple before loading. I had some 2.5x500x1000mm sheets in there a while back and the ride was much better! I selected the 2.7 on that list, the 2.4 that corresponds to the '98 model year shows 880kg although I would take that to be a Commercial.

LINK 2.4

[Wallace]

752kg in the back and the suspension coped quite well, almost level with the saggy torsion bars.

[Wallace]

Scrap lift shaft counterbalance weights, 20mm x 220mm x 1250mm, my bumper build may be a wee bit heavy duty.

[D2206]

Originally Posted by Wallace

Scrap lift shaft counterbalance weights, 20mm x 220mm x 1250mm, my bumper build may be a wee bit heavy duty.

Are you planning on building a bumper or a ram lol?

[Banshee]

Originally Posted by Wallace

752kg in the back and the suspension coped quite well, almost level with the saggy torsion bars.

I have glass and lights in stock if you want to sort that damage out matey

Drop me a PM for pricing

[Wallace]

Originally Posted by Banshee

I have glass and lights in stock if you want to sort that damage out matey

Drop me a PM for pricing

o

I do want to sort it but will also need the corner of a car to weld in place for the lamp to fit into. Covid 19 has slowed my plans for this year down considerably.