New Member

OldSchool_Si · 30-04-2019, 15:02

Just joined today, recently bought a 1989 Patrol 3.3 turbo. In good condition generally, but has a few things that need doing, i.e. tick over is too high, check cable and its adjusted as far as it can go. Any ideas what else I can try? Cheers

solarman216 · 30-04-2019, 19:00

Do not know about the 3.3 but my 2.8 is a mechanical pump as is yours if it has a cable, if so then the throttle arm will have two adjusting screws, one for idling and one for max speed, the idling one is the one that the throttle arm is resting on at rest, this is the one to adjust, undo the locking nut and turn it anti clock wise gently until the idle is where you want it, do not forget to nip the lock nut up again, there are other possibilities however that it would be best to check first, you may or may not have them depending on your setup, I am referring to the automatic rev increasing devices that are actuated by the power steering and air con, they could be stuck in the hi position, Rick

macabethiel · 30-04-2019, 20:38

The stone wall in the background looks very Ashbourne / Wirksworth style in construction there are a few folks from Derbyshire on here!!

Banshee · 30-04-2019, 21:25

Quote:

Originally Posted by macabethiel

The stone wall in the background looks very Ashbourne / Wirksworth style in construction there are a few folks from Derbyshire on here!!

I know exactly where he is!!! I've seen that around when I was passing near Milners I'm sure of it!?!?!?!?!

macabethiel · 01-05-2019, 06:59

Quote:

Originally Posted by Banshee

I know exactly where he is!!! I've seen that around when I was passing near Milners I'm sure of it!?!?!?!?!

So its more Matlock or near DFS or that lead recycling plant Enthovens !!

OldSchool_Si · 01-05-2019, 00:17

Solarman216 - I have adjusted the stops, and to be honest I didn't think about the auto rev. I'm new to these engines, so learning lol. Will have a look and see if there is such a device.

Milners is not far away from me

Banshee · 01-05-2019, 07:51

Careful let's not scare the guy off and his beast of a Patrol

Welcome by the way matey, Rick's advice is never wrong, get those screwdrivers out!!!

Davey Boy · 02-05-2019, 13:18

Welcome aboard Si.

Monaro Pete · 03-05-2019, 11:47

Welcomes

30-04-2019, 19:00	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	Do not know about the 3.3 but my 2.8 is a mechanical pump as is yours if it has a cable, if so then the throttle arm will have two adjusting screws, one for idling and one for max speed, the idling one is the one that the throttle arm is resting on at rest, this is the one to adjust, undo the locking nut and turn it anti clock wise gently until the idle is where you want it, do not forget to nip the lock nut up again, there are other possibilities however that it would be best to check first, you may or may not have them depending on your setup, I am referring to the automatic rev increasing devices that are actuated by the power steering and air con, they could be stuck in the hi position, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

30-04-2019, 20:38	#3
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	Welcome to the Club a very clean looking truck. The stone wall in the background looks very Ashbourne / Wirksworth style in construction there are a few folks from Derbyshire on here!!

01-05-2019, 07:51	#7
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Careful let's not scare the guy off and his beast of a Patrol Welcome by the way matey, Rick's advice is never wrong, get those screwdrivers out!!! __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

01-05-2019, 00:17	#6
OldSchool_Si Junior Member Join Date: Apr 2019 Location: Derbyshire Vehicle: 1989 SWB Nissan Patrol Posts: 6	Solarman216 - I have adjusted the stops, and to be honest I didn't think about the auto rev. I'm new to these engines, so learning lol. Will have a look and see if there is such a device. Milners is not far away from me

02-05-2019, 13:18	#8
Davey Boy Senior Member Join Date: Dec 2015 Location: Dartmoor Vehicle: Patrol ZD30 SVE Posts: 960	Welcome aboard Si.

03-05-2019, 11:47	#9
Monaro Pete Senior Member Join Date: Apr 2016 Location: Nr J28 M1 Vehicle: 03 Terrano 2.7 TDi Posts: 995	Welcomes