Mechanics now a days..

Lazy-Ferret · 15-08-2017, 09:52

***Deep intake of breath, then release it slowly through teeth***

I can see the problem mate... your lesser angled sprocket drive pin is hitting your left handed gudgin screw, causing the timing to alter by 27.5 degrees.

I can fix it, but it's goner cost...

Won't know how much till I get it on the diagnostics computer, of course!

Blocky10 · 15-08-2017, 10:01

Is that Caramac I see there?

Lazy-Ferret · 15-08-2017, 10:07

Quote:

Originally Posted by Blocky10

Is that Caramac I see there?

We have never had a Caramac... must add that to the ever decreasing list of future ferret names...

Our staring Mechanics this time are:-
Lion (Bar) (Polecat coloured)
Kit
Kat
Chewit
Reject.

Blocky10 · 15-08-2017, 10:37

Quote:

Originally Posted by Lazy-Ferret

We have never had a Caramac... must add that to the ever decreasing list of future ferret names...

Our staring Mechanics this time are:-
Lion (Bar) (Polecat coloured)
Kit
Kat
Chewit
Reject.

Reject!? Poor thing will end up with a complex

Lazy-Ferret · 15-08-2017, 11:10

Quote:

Originally Posted by Blocky10

Reject!? Poor thing will end up with a complex

He is from a litter we took in for the Rescue, from 3 days old.. They were all supposed to go back to the rescue when they got old enough, but the rescue had a bad summer, and were overrun with ferrets, so had no room. We were secretly happy about this, as it meant we got to see them grow from babies to thugs.

We were told not to name them, as once they have names, you become attached and can't re-home them... so being good, we named one little jill, who we intended to keep, and the rest were just called "the kits". Over time we started re-homeing them, but every time someone came round to chose a kit, he was the one they decided against, so I started calling him the "poor little reject"... Bad move, as he effectively got a name, and then a personality, so ended up staying as well...

5 years on, and he is still called Reject... He even comes to his name...

panelbeater · 15-08-2017, 11:27

bit strong to give them a trim

15-08-2017, 09:52	#1
Lazy-Ferret Senior Member Join Date: Jun 2012 Location: Sevenoaks, Kent Vehicle: Terrano 2.7TDi SE Touring Posts: 5,221	Mechanics now a days.. *Deep intake of breath, then release it slowly through teeth* I can see the problem mate... your lesser angled sprocket drive pin is hitting your left handed gudgin screw, causing the timing to alter by 27.5 degrees. I can fix it, but it's goner cost... Won't know how much till I get it on the diagnostics computer, of course!

15-08-2017, 10:01	#2
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Is that Caramac I see there?

15-08-2017, 11:27	#6
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,639	bit strong to give them a trim