|
Members free classifieds and wanted items. Place your Nissan/Ford 4x4 vehicles or related items for sale and wanted here. |
|
Thread Tools | Display Modes |
|
01-04-2015, 14:06 | #1 |
Junior Member
Join Date: Oct 2014
Location: SW England
Vehicle: Terrano Regulus Tdi Auto
Posts: 28
|
Seat belts Nissan Regulus LWB
I need longer front seat belts for the above vehicle. I am 6'7" tall and I am finding the fitted belts are to short when rear seats occupied or folded flat. Even normally they are only just long enough.
Many thanks in advance |
01-04-2015, 14:32 | #2 |
Senior Member
Join Date: Feb 2007
Location: Staffordshire
Vehicle: Maverick Mk I 2.7 TD LWB
Posts: 7,825
|
Hi Ken, as non of us are possibly able to compare your model with the later Terranos, what might help, would be to fully pull out the seat belt and measure the full length visible, ie all the way from the exposed part, all the way to the lower fixing bolt.
Then we can compare to later models. Also, in case of success, what colour are yours, grey, black, beige etc. Rustic
__________________
Ford Maverick GLX 1995 2.7TD LWB in illusion silver, 98k miles. Owned since new, for 22 years. Best car I have ever owned. Just wish I could drive it more. |
01-04-2015, 15:59 | #3 |
Junior Member
Join Date: Oct 2014
Location: SW England
Vehicle: Terrano Regulus Tdi Auto
Posts: 28
|
seat belts
Thanks will do that over Easter. A good Easter to you all
|
01-04-2015, 20:57 | #4 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,430
|
The T2 belts both Mk 1 and 2 can be changed on theroller block, if yours are of the same pattern then as Rustic says give us a belt length an we can see if a longer one can be found, the method of belt removal/change is to remove the roller from the car and pull the belt out to its fullest extent then you should see the belt go through a slot in the roller, push the belt back into the roller and it will come out the other side with a plastic pin in the belt loop, remove the pin and the belt will now pull through the roller, make sure you place a bit of stiff wire through the roller slot to stop it unraveling and remember which way the belt goes into the slot, both the direction and the in/out face of the belt, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
01-04-2015, 22:13 | #5 |
Senior Member
Join Date: Apr 2009
Location: essex
Vehicle: nissan mistral 27td
Posts: 1,043
|
seat belt
Hi
I have a Mistral import - and although I am a little portly the belts are small so I will follow this thread with interest I think it is an import thing - cars made for the little people paulp |
02-04-2015, 08:23 | #6 |
Senior Member
Join Date: Dec 2012
Location: clacton on sea essex
Vehicle: nissan terrano 2 2.7 tdi
Posts: 1,638
|
both my t2 have a short extra belt i got from eb as i t will not be long enough to reach due to my fat tum.works a treat and i leave them in for mot time.cheap too.
|
|
|