|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
|
25-01-2015, 16:27 | #1 |
Senior Member
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
|
Heavy science Question?
My wife and I had an interesting conversation this morning, to which neither of us know the answer. I thought a quick look on Google would answer it, but I can't find it on there either...
So here is the question... Assuming there are no outside losses, the room is thermostatically set at 20c. I have 2 identical jugs of water each with exactly 1 litre of water in, but one is at 30c, and one is at 10c. if both jugs are left in the room, which will get to 20c first, the hot or cold one? Also, along the same lines, if I had 1/2litre at 90c, and poured 1/2litre of 10c water into it, what would be the end temp of the 1litre. To me, these should be a fairly easy way to work this out, but I can't find it anywhere. |
25-01-2015, 17:14 | #2 |
Senior Member
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
|
I know a guy who knows a guy. Let me get back to you
|
25-01-2015, 17:52 | #3 |
Senior Member
Join Date: Sep 2013
Location: Swansea, S.Wales
Vehicle: 02Terrano II 3.0 SVE Auto
Posts: 1,586
|
http://en.m.wikipedia.org/wiki/Mpemba_effect
Check this out see if it helps, and this one maybe...... http://sciencefair.math.iit.edu/projects/cooling/ |
25-01-2015, 18:51 | #4 |
Senior Member
Join Date: Jan 2011
Location: Essex Wescliff
Vehicle: maverick 1994 2.7 TD
Posts: 1,278
|
As the colorific content of the 30C jug is higher I would assumethe 10C jug would get there first
The higher temp one would have more to lose than the lower one had to gain |
25-01-2015, 19:10 | #5 |
Senior Member
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
|
Ok answer from someone I know with a good scientific background.
"Pretty straight forward for both really. For the first one. The 30' jug will cool down more rapidly than the 10' jug because it has a greater temperature difference from the room, so the temperatures will converge, BUT. it will never quite catch up with the 10' jug, so the 10' jug will reach room temp first, but only just. The mixing of the two is simply an average. (90 + 10) / 2 = 50'C You can work it out by more complicated means and calculate the amount of energy contained in the two jugs and then work out what temperature that would make 1l of water, but you still get the same answer." Clever stuff I guess |
25-01-2015, 19:15 | #6 |
Senior Member
Join Date: Jan 2011
Location: Essex Wescliff
Vehicle: maverick 1994 2.7 TD
Posts: 1,278
|
So I woz right
|
25-01-2015, 20:25 | #7 | ||
Senior Member
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
|
Quote:
Quote:
The second one makes sense, when I used to fill the Fish tank, it would take about 4l of boiling water to bring the 16l of 10' tap water up to 30', which I guess is about right. I am surprised how hard this is to find the answer too. |
||
25-01-2015, 21:49 | #8 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
just seen this, and my answer would have been, you always lose heat quicker than gain it so in theory the hotter one would get to 20 first but as they near to the target temperature the hotter one will slow down so I would say they will take almost the same time, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
|