30x BRAND NEW CYLINDER HEADS

cncfabs · 06-09-2013, 22:04

http://www.ebay.co.uk/itm/JOB-LOT-NI...51069596037%26

solarman216 · 06-09-2013, 22:24

good deal for somebody, recon it will make a grand plus at the end of the day but still very cheap IF? you can move them on, I will watch it, Rick

AD Ent · 06-09-2013, 23:12

only 18hrs to go.... Wow 30 heads. £171 at the mo

solarman216 · 06-09-2013, 23:20

Quote:

Originally Posted by AD Ent

only 18hrs to go.... Wow 30 heads. £171 at the mo

yes but, I have been on here 3 plus years dealt personally with one cracked head, and as far as I can remember only heard of one other, so looks rather bleak me thinks, wonder what the weigh in scrap value would be?? I would not bid more than £200 Rick

AD Ent · 07-09-2013, 09:20

That is actually very reassuring. Its one thing I love about these engines is the cooling system. All through the hot spell the fan didnt come on once or the temp gauge move at all from normal. I've had to many cars where I have had to have the head gasket done or scrap.

Banshee · 07-09-2013, 14:12

Worthless, they are just bare heads no valves

I've been told that these never go it's the valves that get damaged so unless you plan on weighing them in then it's a worthless purchase

briggie · 07-09-2013, 16:28

don't milners sell the rest of the " bits " to go with them ?

cncfabs · 07-09-2013, 17:26

Anyone on here buy them

Banshee · 07-09-2013, 18:27

Quote:

Originally Posted by briggie

don't milners sell the rest of the " bits " to go with them ?

I've just had a look and it doesn't seem like they do

They only list a bare cylinder head, same as the ones being sold on ebay

briggie · 07-09-2013, 18:30

all you need to do is find a source of the other bits , and you could build a new engine !!!!

solarman216 · 07-09-2013, 19:27

far too dear at £370, Rick

cncfabs · 07-09-2013, 20:38

Quote:

Originally Posted by solarman216

far too dear at £370, Rick

Thats only £12.30 each i would have bought them but not got anywhere to keep them and they had to be collected

solarman216 · 07-09-2013, 20:56

Quote:

Originally Posted by cncfabs

Thats only £12.30 each i would have bought them but not got anywhere to keep them and they had to be collected

OK if you have a lot of customers with cracked or warped heads you would need to sell at least 4 to see your money back, as I said of all the head gaskets we did here only one head was cracked and have only heard of one other on here, Rick

rustic · 07-09-2013, 22:06

Quote:

Originally Posted by solarman216

... as I said of all the head gaskets we did here only one head was cracked and have only heard of one other on here, Rick

If that's the case, then any secondhand head would provide good service if you needed one, plenty of those around I guess.

I wonder if he tried to sell the heads in smaller batches, if he would have got a better price overall.

Actually you could have used them to make top gear type coffee tables, and sell them to members of our club.

I recon that Ryan has bought them, to supplement his gear based table lamps.

What do they say...
Two heads are better than one.

Rustic

(RIP) PLANK · 09-09-2013, 12:38

Quote:

Originally Posted by briggie

all you need to do is find a source of the other bits , and you could build a new engine !!!!

or even a new car

06-09-2013, 22:04	#1
cncfabs Senior Member Join Date: Sep 2009 Location: somerset Vehicle: terrano Posts: 1,947	30x BRAND NEW CYLINDER HEADS http://www.ebay.co.uk/itm/JOB-LOT-NI...51069596037%26

06-09-2013, 22:24	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	good deal for somebody, recon it will make a grand plus at the end of the day but still very cheap IF? you can move them on, I will watch it, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

07-09-2013, 14:12	#6
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Worthless, they are just bare heads no valves I've been told that these never go it's the valves that get damaged so unless you plan on weighing them in then it's a worthless purchase __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

07-09-2013, 19:27	#11
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	far too dear at £370, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

06-09-2013, 23:12	#3
AD Ent Senior Member Join Date: Dec 2011 Location: West Yorkshire Vehicle: Terrano II SE+ 2.7 2000 Posts: 915	only 18hrs to go.... Wow 30 heads. £171 at the mo

07-09-2013, 09:20	#5
AD Ent Senior Member Join Date: Dec 2011 Location: West Yorkshire Vehicle: Terrano II SE+ 2.7 2000 Posts: 915	That is actually very reassuring. Its one thing I love about these engines is the cooling system. All through the hot spell the fan didnt come on once or the temp gauge move at all from normal. I've had to many cars where I have had to have the head gasket done or scrap.

07-09-2013, 16:28	#7
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	don't milners sell the rest of the " bits " to go with them ?

07-09-2013, 17:26	#8
cncfabs Senior Member Join Date: Sep 2009 Location: somerset Vehicle: terrano Posts: 1,947	Anyone on here buy them

07-09-2013, 18:30	#10
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	all you need to do is find a source of the other bits , and you could build a new engine !!!!