Terrano A Frame

John B · 14-04-2013, 21:07

Hi all, does anyone know if An A frame front bull bar which came off a 2000 terrano would fit my 2004. Thanks again

11redrex · 14-04-2013, 21:17

Don't know about yours but mine bolts on at the bottom of the chassis where the towing eye is. If the chassis are the same you should be ok.

Terranical · 14-04-2013, 21:50

I think the main issue in fitting an A bar from another year is the position of the upper mounts (the lower ones fit to the tie-down eyes, which I would guess are the same throughout the range).
On my my '94 T2 the upper mounts are attached to a pair of L-shaped brackets, with the long part of the L bolting to lugs on the A frame, passing below the radiator grille and above the bumper to a pair of pre-threaded M6 ferrules either side of the radiator.
As the radiator grilles are different on the Y2K from the 2004 (I think) some careful measurement would be needed!

John B · 14-04-2013, 22:23

Quote:

Originally Posted by Terranical

I think the main issue in fitting an A bar from another year is the position of the upper mounts (the lower ones fit to the tie-down eyes, which I would guess are the same throughout the range).
On my my '94 T2 the upper mounts are attached to a pair of L-shaped brackets, with the long part of the L bolting to lugs on the A frame, passing below the radiator grille and above the bumper to a pair of pre-threaded M6 ferrules either side of the radiator.
As the radiator grilles are different on the Y2K from the 2004 (I think) some careful measurement would be needed!

Thanks for your help

14-04-2013, 21:07	#1
John B Senior Member Join Date: Mar 2013 Location: Wales with the sheep Vehicle: Terrano 2004 2.7 Tdi lwb Posts: 550	Terrano A Frame Hi all, does anyone know if An A frame front bull bar which came off a 2000 terrano would fit my 2004. Thanks again

14-04-2013, 21:50	#3
Terranical Senior Member Join Date: Jun 2010 Location: Resident in Bristol, Terrano in Spain Vehicle: 1994 Terrano 2.7TD SWB Posts: 1,398	I think the main issue in fitting an A bar from another year is the position of the upper mounts (the lower ones fit to the tie-down eyes, which I would guess are the same throughout the range). On my my '94 T2 the upper mounts are attached to a pair of L-shaped brackets, with the long part of the L bolting to lugs on the A frame, passing below the radiator grille and above the bumper to a pair of pre-threaded M6 ferrules either side of the radiator. As the radiator grilles are different on the Y2K from the 2004 (I think) some careful measurement would be needed! Last edited by Terranical; 14-04-2013 at 21:52. Reason: Omission

14-04-2013, 21:17	#2
11redrex Senior Member Join Date: Aug 2010 Location: East Anglia. Buh. Vehicle: 1997 LWB Maverick 2.7TDi Posts: 1,377	Don't know about yours but mine bolts on at the bottom of the chassis where the towing eye is. If the chassis are the same you should be ok.