Spill Pipe for TDi wanted

makeitfit · 13-03-2012, 09:39

HELP ME PLEASE I seem to have erm customised my spill off pipe and so need a new standard one

Anybody got one pleeeeeaaaaasse? Urgent as the truck's going nowhere fast at the mo

(RIP) PLANK · 13-03-2012, 11:02

there's loads on ebay if you know the correct diameter, if you find out post it on here!

makeitfit · 13-03-2012, 11:25

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit

I'll get a pic

Fez_uk · 13-03-2012, 11:29

is there nothing in tanygroes?

makeitfit · 13-03-2012, 12:00

Quote:

Originally Posted by Fez_uk

is there nothing in tanygroes?

Nope they're modified in exactly the same way

Fez_uk · 13-03-2012, 12:02

ask this guy he seems to always have terrano stuff, although what you needs on a engine and most are sold with them?

http://www.ebay.co.uk/itm/Maverick-T...#ht_500wt_1415

and:

http://www.ebay.co.uk/itm/97-Terrano...#ht_500wt_1183

(RIP) PLANK · 13-03-2012, 11:43

Quote:

Originally Posted by makeitfit

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit

I'll get a pic

I see, serious customisation error then?

makeitfit · 13-03-2012, 11:59

Quote:

Originally Posted by PLANK

I see, serious customisation error then?

Damn spanner monkey

Spot the mistake

(RIP) PLANK · 13-03-2012, 12:13

if it's not snapped at a joint, couldn't you put a sleeve over it? even as a temporary fix?

extreme-4x4 · 13-03-2012, 13:55

id go with the sleave too, even rubber would do for a bit .....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too

Adz · 13-03-2012, 17:53

As above, just sleeve it with fuel hose

Main dealer is your best bit as that's where I got mine

Patch · 13-03-2012, 19:36

You could try your local plumber (if he is a gasfitter as well) to weld a stub on the ring, then you could join it with fuel hose as been suggested

makeitfit · 13-03-2012, 21:05

Thanks guys it's broken right on the fitting so nothing to sleeve

I did consider brazing it if all else failed but horah cnfyfasbs has come up with the goods

13-03-2012, 09:39	#1
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Spill Pipe for TDi wanted HELP ME PLEASE I seem to have erm customised my spill off pipe and so need a new standard one Anybody got one pleeeeeaaaaasse? Urgent as the truck's going nowhere fast at the mo

13-03-2012, 11:02	#2
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	there's loads on ebay if you know the correct diameter, if you find out post it on here!

13-03-2012, 11:25	#3
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit I'll get a pic

13-03-2012, 11:29	#4
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	is there nothing in tanygroes?

13-03-2012, 12:02	#6
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	ask this guy he seems to always have terrano stuff, although what you needs on a engine and most are sold with them? http://www.ebay.co.uk/itm/Maverick-T...#ht_500wt_1415 and: http://www.ebay.co.uk/itm/97-Terrano...#ht_500wt_1183

13-03-2012, 12:13	#9
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	if it's not snapped at a joint, couldn't you put a sleeve over it? even as a temporary fix?

13-03-2012, 13:55	#10
extreme-4x4 Senior Member Join Date: Sep 2008 Location: WALES Posts: 6,295	id go with the sleave too, even rubber would do for a bit .....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too

13-03-2012, 17:53	#11
Adz Senior Member Join Date: May 2009 Location: Roaming Nomad Vehicle: 1995 SWB Terrano Posts: 5,370	As above, just sleeve it with fuel hose Main dealer is your best bit as that's where I got mine

13-03-2012, 19:36	#12
Patch Junior Member Join Date: Feb 2012 Location: NZL Vehicle: Terrano II (Mistral) Posts: 15	You could try your local plumber (if he is a gasfitter as well) to weld a stub on the ring, then you could join it with fuel hose as been suggested

13-03-2012, 21:05	#13
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Thanks guys it's broken right on the fitting so nothing to sleeve I did consider brazing it if all else failed but horah cnfyfasbs has come up with the goods