|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
|
31-08-2011, 14:14 | #1 |
Member
Join Date: Aug 2011
Location: derbyshire
Vehicle: y61 2.8
Posts: 74
|
newbie from derbyshire
hello there,having probs with a 1999 y61 2.8 diesel ,it won't start when its hot it'll just wind the batt down but if you leave it until warm or cold its no problem,any ideas or what consult to buy to read the error codes,many thanks john
|
31-08-2011, 16:21 | #2 |
Senior Member
Join Date: Aug 2008
Location: Devizes Wiltshire
Vehicle: Nissan Note Ntec 1.5
Posts: 14,138
|
oooh could change the fuel line, as some times they let air get sucked IN,
|
31-08-2011, 16:48 | #3 |
Member
Join Date: Aug 2011
Location: derbyshire
Vehicle: y61 2.8
Posts: 74
|
fuel line
i'm never that lucky,if its air why would it start ok when its cooled down i was thinking more electrical something breaking down when hot with all the electrics on the fuel pump,when its hot theres fuel to the pump but none out the injector pipes and no air when you use the bleed screw
|
31-08-2011, 18:57 | #4 |
Senior Member
Join Date: Jun 2005
Location: NOTTINGHAMSHIRE
Vehicle: LANDROVER Disco 300TDI
Posts: 1,802
|
newbie from derbyshire
get your self next to an air line blast the electrics with it one at a time to cool them.
try a separate earth onto the ecu . does it run ok when hot? others will hoefully be along soon. ps welcome to the mad house. |
31-08-2011, 19:11 | #5 |
Member
Join Date: Aug 2011
Location: derbyshire
Vehicle: y61 2.8
Posts: 74
|
airline
yes it runs fine,so long as you don't turn it off,i'll try the airline tomorrow
|
31-08-2011, 19:21 | #6 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,432
|
Dont know much about the y61 but if it is not fly by wire, then wen hot can you detect the pump solenoid clicking? if not check there is power to it if yes then solenoid is sticking when hot, if no then bad connection/relay or ECU, Rick
|
|
|