spare wheel lift

micktheshed · 22-04-2018, 18:46

Just bought a newish caravan with the black Al-Co hitch (as opposed to the older red one. It is really tight to couple/uncouple compared to the older one as it needs more stroke.
I finally resorted to elongating the holes in the mounting bracket & removing the single stud altogether (worst part of the job). What was wrong with using 4 bolts in the first place? This has raised the wheel 20/25mm but I could have done with more.
Has any-one else done similar or an improved version?

Thomas-the-Terrano2 · 22-04-2018, 19:53

Often put spare in boot for holiday towing as don't need the 3rd row of seats. It's then a breeze. Currently have a space with my standard tow ball but on cards to use an alko extended ball too.

Thomas-the-Terrano2 · 22-04-2018, 19:54

Some say can invert carrier but the stud vs bolts makes it another hassle.

Lazy-Ferret · 22-04-2018, 22:19

I have done it on both of our T2's...

On mine, because I have a hard spare wheel cover with the number plate mounted on it, not only is it bigger in diameter than the spare wheel, but it has a deeper dish, so the rear wiper would hit it, and it was impossible to get the caravan stabiliser hitch on the back at all. Since I had to space the wheel further out from the door so the wiper missed the spare wheel cover, I cut 2 bits of 25mm square box section, one went across the top two bolts, and the other across the bottom. I then got a bit of 6mm Aluminium Chequer plate that was the length of the spare wheel carrier, plus the distance I wanted to lift it, bolted that to the door where the old carrier went, with the spacers holding it away from the door, and then bolted the carrier to the plate, further up. I went a bit OTT, as I don't use the back window, as I have the camera linked to a monitor where the rear view mirror was mounted.

Been like that for about 4 years, and it's a dream to put the van on the back, as it is miles away from the spare wheel now.

You can see the before and after on the 2 T2's in this picture.

Suz's is now similar, only not as high, and I welded the square tube spacer up into a bracket that also had a place to mount the PMR radio aerial onto it as well.

Thomas-the-Terrano2 · 24-04-2018, 16:52

Wow best is doddle hitching up. When look at discovery and colarado are higher up. But shogun seems low or ball has to come out long way to clear

Thomas-the-Terrano2 · 13-05-2018, 23:09

has T reg had body lift as well.

Any photos of the bracket

Rarche2002 · 19-03-2019, 18:04

Put it on the roof

Sent from my iPhone using Tapatalk Pro

elty001 · 19-03-2019, 18:28

Send me the details of what you want Zac with some measurements and i will make you one up

22-04-2018, 18:46	#1
micktheshed Senior Member Join Date: Feb 2011 Location: warwickshire Vehicle: Dec 2004, terrano 3l Auto Posts: 313	spare wheel lift Just bought a newish caravan with the black Al-Co hitch (as opposed to the older red one. It is really tight to couple/uncouple compared to the older one as it needs more stroke. I finally resorted to elongating the holes in the mounting bracket & removing the single stud altogether (worst part of the job). What was wrong with using 4 bolts in the first place? This has raised the wheel 20/25mm but I could have done with more. Has any-one else done similar or an improved version?

22-04-2018, 19:53	#2
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	Often put spare in boot for holiday towing as don't need the 3rd row of seats. It's then a breeze. Currently have a space with my standard tow ball but on cards to use an alko extended ball too. __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

22-04-2018, 19:54	#3
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	Some say can invert carrier but the stud vs bolts makes it another hassle. __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

24-04-2018, 16:52	#5
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	Wow best is doddle hitching up. When look at discovery and colarado are higher up. But shogun seems low or ball has to come out long way to clear __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

13-05-2018, 23:09	#6
Thomas-the-Terrano2 Moderator Join Date: Dec 2004 Location: Hackenthorpe Sheffield Vehicle: Terrano2 R20 lwb 2.7TDi Posts: 5,234	has T reg had body lift as well. Any photos of the bracket __________________ M6YTB / 20YTB '60' 2010 Ford C Max Zetec 1.6i, black '56' 2006 Jeep Grand Cherokee 3.0TD, silver 2021 Bailey Pegasus Grade SE Turin caravan Smile, its more likely to confuse. One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep. Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!

22-04-2018, 22:19	#4
Lazy-Ferret Senior Member Join Date: Jun 2012 Location: Sevenoaks, Kent Vehicle: Terrano 2.7TDi SE Touring Posts: 5,221	I have done it on both of our T2's... On mine, because I have a hard spare wheel cover with the number plate mounted on it, not only is it bigger in diameter than the spare wheel, but it has a deeper dish, so the rear wiper would hit it, and it was impossible to get the caravan stabiliser hitch on the back at all. Since I had to space the wheel further out from the door so the wiper missed the spare wheel cover, I cut 2 bits of 25mm square box section, one went across the top two bolts, and the other across the bottom. I then got a bit of 6mm Aluminium Chequer plate that was the length of the spare wheel carrier, plus the distance I wanted to lift it, bolted that to the door where the old carrier went, with the spacers holding it away from the door, and then bolted the carrier to the plate, further up. I went a bit OTT, as I don't use the back window, as I have the camera linked to a monitor where the rear view mirror was mounted. Been like that for about 4 years, and it's a dream to put the van on the back, as it is miles away from the spare wheel now. You can see the before and after on the 2 T2's in this picture. Suz's is now similar, only not as high, and I welded the square tube spacer up into a bracket that also had a place to mount the PMR radio aerial onto it as well.

19-03-2019, 18:04	#7
Rarche2002 Senior Member Join Date: Jan 2019 Location: Lancashire Vehicle: Nissan patrol y61 Posts: 309	Put it on the roof Sent from my iPhone using Tapatalk Pro

19-03-2019, 18:28	#8
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	Send me the details of what you want Zac with some measurements and i will make you one up