I smell an upgrade.

don simon · 13-09-2017, 17:46

Planning some upgrades and new kit over the weekend.
I came across this at work and it gave me an idea.
But what could I be possibly planning to use it for?

Know what it is? by Simon Carter, en Flickr

Banshee · 13-09-2017, 17:50

Snorkel!!!!!!!!!! Mate get me some of those :O :O :O

Sent from my SM-G930F using Tapatalk

Blocky10 · 13-09-2017, 18:42

Quote:

Originally Posted by Banshee

Snorkel!!!!!!!!!! Mate get me some of those :O :O :O

Sent from my SM-G930F using Tapatalk

Yes yes. A little tickle with a flap disc and a touch of matt black

jims-terrano · 13-09-2017, 19:03

I thought you were going to make an incontinance device for the drivers seat

terranosaurusdoug · 13-09-2017, 19:05

In car pisser!

Banshee · 13-09-2017, 20:40

If it is for a snorkel looking at it again he's going to have to cut it back a lot as there's holes in it

Sent from my SM-G930F using Tapatalk

don simon · 14-09-2017, 05:53

'Tis indeed for a snorkel, but I don't currently have one where this could be used in order to see if it's a good fit or not. The ducting is flat, so shouldn't take too much engine space, and yes, there are holes, but they will either be filled or blocked by the connections.
Now to buy a snorkel...

Banshee · 14-09-2017, 08:25

Quote:

Originally Posted by don simon

'Tis indeed for a snorkel, but I don't currently have one where this could be used in order to see if it's a good fit or not. The ducting is flat, so shouldn't take too much engine space, and yes, there are holes, but they will either be filled or blocked by the connections.
Now to buy a snorkel...

Blocky is your man!!!! He's about to fit one to his motor at some point that I sold him at the Rustic meet up, send him 2 and he can slap one on his and then make you another to match so you can copy the design.

I'll take a few of those off you should they be successful, I think I may actually recognise the part and know it's original intended purpose

don simon · 14-09-2017, 17:50

Quote:

Originally Posted by Banshee

Blocky is your man!!!! He's about to fit one to his motor at some point that I sold him at the Rustic meet up, send him 2 and he can slap one on his and then make you another to match so you can copy the design.

I'll take a few of those off you should they be successful, I think I may actually recognise the part and know it's original intended purpose

I'll try and find the price, they should be available from local electrical or HVAC supplier for little ££££, they'll supply the ducting too. If not, I'll look at how much I can get a few for.

13-09-2017, 17:46	#1
don simon Senior Member Join Date: Oct 2014 Location: Gone. Vehicle: Terrano ii Posts: 2,215	I smell an upgrade. Planning some upgrades and new kit over the weekend. I came across this at work and it gave me an idea. But what could I be possibly planning to use it for? Know what it is? by Simon Carter, en Flickr

13-09-2017, 17:50	#2
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Snorkel!!!!!!!!!! Mate get me some of those :O :O :O Sent from my SM-G930F using Tapatalk __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

13-09-2017, 20:40	#6
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	If it is for a snorkel looking at it again he's going to have to cut it back a lot as there's holes in it Sent from my SM-G930F using Tapatalk __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

13-09-2017, 19:03	#4
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	I thought you were going to make an incontinance device for the drivers seat

13-09-2017, 19:05	#5
terranosaurusdoug Senior Member Join Date: Sep 2014 Location: Yorkshire, J33 M62 Vehicle: 2000 Terrano lwb 2.7TDI Posts: 5,500	In car pisser!

14-09-2017, 05:53	#7
don simon Senior Member Join Date: Oct 2014 Location: Gone. Vehicle: Terrano ii Posts: 2,215	'Tis indeed for a snorkel, but I don't currently have one where this could be used in order to see if it's a good fit or not. The ducting is flat, so shouldn't take too much engine space, and yes, there are holes, but they will either be filled or blocked by the connections. Now to buy a snorkel...