D22 navara and 2.7 terrano swap with electric pump not mechanical

Fletch_hol97 · 14-05-2022, 13:01

Hi I'm new to the group so apologies if this thread is already out there haven't figured out how to get around the page fully 😂,
I had a d22 2.5 and engine went in it twice... run away first time and then after the rebuild with all the updated bits and new parts my chain guide snapped and smashed the new head to pieces long story short I've got rid of the engine but I had been running around in a terrano whilst my D22 was off the road and it didn't miss a beat that has come to an end of its road times as there's no chassis left and I heard about the swap but I couldn't justify spending that much money on a mechanical pump and have seen people talking about merging the looms together and running electric pump??? Has anyone got any diagrams of the two looms together or any pointers on what to chop off or what to leave alone would be massive help engines in place its just the loom to go now many thanks hope to hear from you all

solarman216 · 14-05-2022, 20:50

Hi mate and welcome, sorry hear f your woes, not heard of merging the two looms, first of all the terry came in two flavours, Bosch or Zexel and the looms are very different between the two, so doubt that any of the D22 stuff will be of any use, to my mind you just need to remove all the engine related T2 stuff and fit it all in the D22 including the coil around the ignition barrel, hope this helps, Rick

14-05-2022, 13:01	#1
Fletch_hol97 Junior Member Join Date: May 2022 Location: Cumbria Vehicle: Nissan navara d22 Posts: 1	D22 navara and 2.7 terrano swap with electric pump not mechanical Hi I'm new to the group so apologies if this thread is already out there haven't figured out how to get around the page fully 😂, I had a d22 2.5 and engine went in it twice... run away first time and then after the rebuild with all the updated bits and new parts my chain guide snapped and smashed the new head to pieces long story short I've got rid of the engine but I had been running around in a terrano whilst my D22 was off the road and it didn't miss a beat that has come to an end of its road times as there's no chassis left and I heard about the swap but I couldn't justify spending that much money on a mechanical pump and have seen people talking about merging the looms together and running electric pump??? Has anyone got any diagrams of the two looms together or any pointers on what to chop off or what to leave alone would be massive help engines in place its just the loom to go now many thanks hope to hear from you all

14-05-2022, 20:50	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Hi mate and welcome, sorry hear f your woes, not heard of merging the two looms, first of all the terry came in two flavours, Bosch or Zexel and the looms are very different between the two, so doubt that any of the D22 stuff will be of any use, to my mind you just need to remove all the engine related T2 stuff and fit it all in the D22 including the coil around the ignition barrel, hope this helps, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.