Hydrolic tipper wiring

Terranoman · 10-10-2010, 17:18

Nothing Nissan related but does any clever person on here know how to wire up a hydrolic motor?

I have a x transit tipper pump and ram but all the wiring has been cut.

Deleted account DD · 10-10-2010, 17:52

what make is the pump in the hyd pack and how old is it? if its a dowty i may have a wiring diagram amongst all my old (not so

) crap

solarman216 · 10-10-2010, 19:01

Did it have wander lead control and do you want same, other than that it will have heavy battery leads, a relay to run the pump and a solenoid valve to release the pressure to lower the ram, Rick

Terranoman · 10-10-2010, 19:59

It is a DEL Equipment Ltd Model T350

I only have the pump and solenoid.

Nothing else and all wires cut off.

solarman216 · 10-10-2010, 20:07

OK tell me what you want to use it for and I will tell you how to wire it up, it is very simple, Rick

Terranoman · 10-10-2010, 20:11

on a ifor williams tipper trailer.

Deleted account DD · 09-11-2010, 09:28

Quote:

Originally Posted by Terranoman

It is a DEL Equipment Ltd Model T350

I only have the pump and solenoid.

Nothing else and all wires cut off.

Have you tried DEL ? they may be happy to supply a wiring diagram if theyre going to get spare parts sales

is this a division of them ? http://www.del-tailifts.co.uk/

You may also get help from these lot http://www.grouphes.com/hes/index.aspx I worked for them for a while. The management a bunch of **********s but the knowledge and parts range for all types is superb

kbekl · 09-11-2010, 09:51

their you go so no need to be a facebook member

10-10-2010, 17:18	#1
Terranoman Senior Member Join Date: Dec 2008 Location: Northamptonshire Vehicle: Terrano II Posts: 622	Hydrolic tipper wiring Nothing Nissan related but does any clever person on here know how to wire up a hydrolic motor? I have a x transit tipper pump and ram but all the wiring has been cut.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-10-2010, 17:52	#2
Deleted account DD Senior Member Join Date: Sep 2008 Posts: 4,705	what make is the pump in the hyd pack and how old is it? if its a dowty i may have a wiring diagram amongst all my old (not so ) crap

10-10-2010, 19:01	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	Did it have wander lead control and do you want same, other than that it will have heavy battery leads, a relay to run the pump and a solenoid valve to release the pressure to lower the ram, Rick

10-10-2010, 19:59	#4
Terranoman Senior Member Join Date: Dec 2008 Location: Northamptonshire Vehicle: Terrano II Posts: 622	It is a DEL Equipment Ltd Model T350 I only have the pump and solenoid. Nothing else and all wires cut off.

10-10-2010, 20:07	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	OK tell me what you want to use it for and I will tell you how to wire it up, it is very simple, Rick

10-10-2010, 20:11	#6
Terranoman Senior Member Join Date: Dec 2008 Location: Northamptonshire Vehicle: Terrano II Posts: 622	on a ifor williams tipper trailer.

09-11-2010, 09:51	#8
kbekl Senior Member Join Date: Aug 2010 Location: Manchester Vehicle: Ford Maverick 2.7 LWB GLX Posts: 1,519	their you go so no need to be a facebook member