Look no feet...

lacroupade · 28-05-2010, 11:10

....spent most of yesterday in Conrad Andersons in Birmingham, having my cruise control reinstalled in my T2 (stripped it out of my old truck when her indoors took it on).....

..and what a delight

....90 miles back to Oxford with my feet on the dashboard!

All set now for the 1000-mile return trip to the french gaff to re-start renovations after my ladder antics

stevecrm · 28-05-2010, 11:30

so whats wrong with the broom handle wedged against the seat trick then? it only cost me 99p for the mod and if i want to speed up I just move the seat forward a notch

lacroupade · 28-05-2010, 14:42

Quote:

Originally Posted by stevecrm

so whats wrong with the broom handle wedged against the seat trick then? it only cost me 99p for the mod and if i want to speed up I just move the seat forward a notch

my missus took it back

Timbo_1975 · 28-05-2010, 16:58

Presumably you have the non-mechanical CC fitted??

What make have you got? Any pics?

lacroupade · 28-05-2010, 18:22

Quote:

Originally Posted by Timbo_1975

Presumably you have the non-mechanical CC fitted??

What make have you got? Any pics?

No pics, but its these...

http://www.conrad-anderson.co.uk/cru...umactuator.htm

with one of these...

http://www.conrad-anderson.co.uk/cru...mandmodule.htm

I had the AP300 in my MkII for about seven years and just had it transplanted into the MkIV with a new stalk. So although expensive when I bought it, its paid for itself over the years. I do a lot of motorway, especially down to SW France and back and at 6'3", I used to get really bad back problems after 10-12 solid hours of driving with my foot jammed in one position all the time....but this fixed all of that.

As you see from the spec, it functions exactly the same as an OEM CC....the only change on this truck (my last was an auto) was the fitment of a clutch switch which disengages cruise if the clutch is depressed (as well as all the other usual cutouts).

I'd highly recommend it to anyone who does high mileages.

Timbo_1975 · 28-05-2010, 18:31

How did they use a mechanical actuator on your fly by wire pedal?

Surely the electronic actuator would be the easiest to set up?

28-05-2010, 11:10	#1
lacroupade Senior Member Join Date: Jan 2009 Location: All hail to the Glove of Love... Posts: 9,212	Look no feet... ....spent most of yesterday in Conrad Andersons in Birmingham, having my cruise control reinstalled in my T2 (stripped it out of my old truck when her indoors took it on)..... ..and what a delight....90 miles back to Oxford with my feet on the dashboard! All set now for the 1000-mile return trip to the french gaff to re-start renovations after my ladder antics

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

28-05-2010, 11:30	#2
stevecrm Senior Member Join Date: Aug 2009 Location: south yorkshire Vehicle: Nissan Terrano Posts: 310	so whats wrong with the broom handle wedged against the seat trick then? it only cost me 99p for the mod and if i want to speed up I just move the seat forward a notch

28-05-2010, 16:58	#4
Timbo_1975 Senior Member Join Date: Apr 2008 Location: S Shropshire Vehicle: Inbetween Terrano's ! Posts: 967	Presumably you have the non-mechanical CC fitted?? What make have you got? Any pics?

28-05-2010, 18:31	#6
Timbo_1975 Senior Member Join Date: Apr 2008 Location: S Shropshire Vehicle: Inbetween Terrano's ! Posts: 967	How did they use a mechanical actuator on your fly by wire pedal? Surely the electronic actuator would be the easiest to set up?