T2 Door Mirrors

Wallace · 09-07-2020, 18:33

My T2 is a '98 SWB Extreme so thankfully has little in the way of electric toys like windows and mirrors and up until the X5 pushed me under an artic trailer I don't remember ever adjusting them so have not missed the electric option. Does anyone know if the mirror wiring would be in the original wiring loom and I would need just the mirrors and switch?

Banshee · 10-07-2020, 11:30

Quote:

Originally Posted by Wallace

My T2 is a '98 SWB Extreme so thankfully has little in the way of electric toys like windows and mirrors and up until the X5 pushed me under an artic trailer I don't remember ever adjusting them so have not missed the electric option. Does anyone know if the mirror wiring would be in the original wiring loom and I would need just the mirrors and switch?

I have spare mirrors, you'll have a short wire inside the mirror that comes out of a grommet and then a white plug on the end.

Drop me a PM if you need any bits

Wallace · 10-07-2020, 12:51

Quote:

Originally Posted by Banshee

I have spare mirrors, you'll have a short wire inside the mirror that comes out of a grommet and then a white plug on the end.

Drop me a PM if you need any bits

Do you know if the wiring is in the car loom?

elty001 · 10-07-2020, 13:07

I would hazard a guess at yes it will be in the main loom.
Like Banshee says the plug will most likely be in the door wiring but just not used.

Lazy-Ferret · 10-07-2020, 14:42

Just to add, there are 2 plug types, which look simular, but won't inter-connect. When I changed Suz's door mirror, I had to change the connector as well.

Sent from my SM-G930F using Tapatalk

Wallace · 10-07-2020, 18:11

I had the drivers door card off a while back to fix the lock and clean the window mechanism, unfortunately I do not recall seeing any stray connectors and I wonder if the Extreme used a basic wiring loom from a Commercial.

solarman216 · 10-07-2020, 20:18

Cannot say if the loom will have the mirror stuff as only ever had electric mirror motors after 97, but do have mirrors if you are in need, Rick

Oh and do have the mirror adjusting switches that self destruct on trying to remove them...

elty001 · 10-07-2020, 20:19

Quote:

Originally Posted by Wallace

I had the drivers door card off a while back to fix the lock and clean the window mechanism, unfortunately I do not recall seeing any stray connectors and I wonder if the Extreme used a basic wiring loom from a Commercial.

I've got a wiring loom to hand for the door with the electric mirror plug.
This came off a 1995 Maverick which had electric mirrors.
Will snap you a pic so you can compare

elty001 · 11-07-2020, 14:21

As promised here are a couple of pictures of the front door wiring .
20200711_133853.jpg

elty001 · 11-07-2020, 14:22

20200711_133910.jpg
Body side.

09-07-2020, 18:33	#1
Wallace Senior Member Join Date: Aug 2018 Location: Middlesex Vehicle: '97 Terrano II 2.4 Xtreme Posts: 368	T2 Door Mirrors My T2 is a '98 SWB Extreme so thankfully has little in the way of electric toys like windows and mirrors and up until the X5 pushed me under an artic trailer I don't remember ever adjusting them so have not missed the electric option. Does anyone know if the mirror wiring would be in the original wiring loom and I would need just the mirrors and switch?

10-07-2020, 20:18	#7
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Cannot say if the loom will have the mirror stuff as only ever had electric mirror motors after 97, but do have mirrors if you are in need, Rick Oh and do have the mirror adjusting switches that self destruct on trying to remove them... __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-07-2020, 13:07	#4
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	I would hazard a guess at yes it will be in the main loom. Like Banshee says the plug will most likely be in the door wiring but just not used.

10-07-2020, 14:42	#5
Lazy-Ferret Senior Member Join Date: Jun 2012 Location: Sevenoaks, Kent Vehicle: Terrano 2.7TDi SE Touring Posts: 5,221	Just to add, there are 2 plug types, which look simular, but won't inter-connect. When I changed Suz's door mirror, I had to change the connector as well. Sent from my SM-G930F using Tapatalk

10-07-2020, 18:11	#6
Wallace Senior Member Join Date: Aug 2018 Location: Middlesex Vehicle: '97 Terrano II 2.4 Xtreme Posts: 368	I had the drivers door card off a while back to fix the lock and clean the window mechanism, unfortunately I do not recall seeing any stray connectors and I wonder if the Extreme used a basic wiring loom from a Commercial.

11-07-2020, 14:21	#9
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	As promised here are a couple of pictures of the front door wiring . 20200711_133853.jpg

11-07-2020, 14:22	#10
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	20200711_133910.jpg Body side.