Newbie

Milo · 14-08-2019, 16:15

Hi.
I have a 2001 nissan terrano r20.
Thanks for having me.

solarman216 · 14-08-2019, 17:42

Hi mate and welcome to the club, Rick

Banshee · 14-08-2019, 20:09

Welcome along to the family

You'll probably never leave

jims-terrano · 14-08-2019, 20:11

Welcome aboard, great little place for help, info and banter

Milo · 15-08-2019, 14:36

Quote:

Originally Posted by Banshee

Welcome along to the family

You'll probably never leave

Hi mate
Thanks

Milo · 15-08-2019, 14:38

Quote:

Originally Posted by solarman216

Hi mate and welcome to the club, Rick

Do any of you guys know where i can aquire a new front nearside wing for a nissan terrano 2 / 2001 model pls ?
Cheers

solarman216 · 15-08-2019, 20:11

New are not available, I have some good Mk 2 wings but pretty sure they only go up to about 2000 so your shape around the lights is different, might be able to mod it though but not sure as not familiar with the new shape, Rick

Milo · 16-08-2019, 13:24

Quote:

Originally Posted by solarman216

New are not available, I have some good Mk 2 wings but pretty sure they only go up to about 2000 so your shape around the lights is different, might be able to mod it though but not sure as not familiar with the new shape, Rick

Ok cheers.
Mine has the facelift with the square headlight which cuts into the front part of the wing

Banshee · 16-08-2019, 11:29

Quote:

Originally Posted by Milo

Do any of you guys know where i can aquire a new front nearside wing for a nissan terrano 2 / 2001 model pls ?
Cheers

Rocking horse shit mate, it would be easier to find Madeline MCCann

Milo · 16-08-2019, 13:26

Quote:

Originally Posted by solarman216

New are not available, I have some good Mk 2 wings but pretty sure they only go up to about 2000 so your shape around the lights is different, might be able to mod it though but not sure as not familiar with the new shape, Rick

Quote:

Originally Posted by Banshee

Rocking horse shit mate, it would be easier to find Madeline MCCann

Great lol

jims-terrano · 16-08-2019, 11:36

Quote:

Originally Posted by Milo

Do any of you guys know where i can aquire a new front nearside wing for a nissan terrano 2 / 2001 model pls ?
Cheers

Hmm really depends on the facelift model of your truck. Earlier type with twin round headlamps are as Banshee says rockin horse poo. Later type with indicator at side of headlamp and wraps around corner of the wing are the later type which seem easier to get hold of. I’ve seen later ones on eBay but people seem to ask big money for them.

Milo · 16-08-2019, 13:30

Quote:

Originally Posted by jims-terrano

Hmm really depends on the facelift model of your truck. Earlier type with twin round headlamps are as Banshee says rockin horse poo. Later type with indicator at side of headlamp and wraps around corner of the wing are the later type which seem easier to get hold of. I’ve seen later ones on eBay but people seem to ask big money for them.

Ive seen fibreglass ones on ebay but my past experience of pattern body parts has been bad. They dont usually line up very well. Poor fit in general

macabethiel · 16-08-2019, 13:56

Many years ago circa 1968/9 I had a 1964 Alfa Romeo 1600 Giulia Sprint - it had rotten front wings, rear panel & sills they were really bad for rusting.(I did buy it cheap - but it became a money pit)

The cost of replacement new parts was just daft beyond words, I found a local coachbuilder who took off the old wings and made new ones using some sort of hand operated roller, likewise the sills & rear panel were fabricated. When done it looked like factory replacements. Admittedly some of the original metal remained - he used lead to fill any joints where new met old.

Believe it or not the front and rear bumpers even had holes in them- I had them repaired & rechromed due to stupid parts prices.

I have lost my photos from the time but this was the shape - mine was metallic gold. They were full of modern specifications such as independent suspension all round, 5 speed gearbox, cruise control ( hand throttle type) twin webbers, disc brakes all round, reclining front seats etc.

alfa by Ted Bagshaw, on Flickr

14-08-2019, 16:15	#1
Milo Junior Member Join Date: Aug 2019 Location: Norfolk Vehicle: NISSAN TERRANO 2 Posts: 6	Newbie Hi. I have a 2001 nissan terrano r20. Thanks for having me.

14-08-2019, 17:42	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Hi mate and welcome to the club, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

14-08-2019, 20:09	#3
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Welcome along to the family You'll probably never leave __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

15-08-2019, 20:11	#7
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	New are not available, I have some good Mk 2 wings but pretty sure they only go up to about 2000 so your shape around the lights is different, might be able to mod it though but not sure as not familiar with the new shape, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

16-08-2019, 13:56	#13
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,416	Old fashioned sheet metal worker needed ! Many years ago circa 1968/9 I had a 1964 Alfa Romeo 1600 Giulia Sprint - it had rotten front wings, rear panel & sills they were really bad for rusting.(I did buy it cheap - but it became a money pit) The cost of replacement new parts was just daft beyond words, I found a local coachbuilder who took off the old wings and made new ones using some sort of hand operated roller, likewise the sills & rear panel were fabricated. When done it looked like factory replacements. Admittedly some of the original metal remained - he used lead to fill any joints where new met old. Believe it or not the front and rear bumpers even had holes in them- I had them repaired & rechromed due to stupid parts prices. I have lost my photos from the time but this was the shape - mine was metallic gold. They were full of modern specifications such as independent suspension all round, 5 speed gearbox, cruise control ( hand throttle type) twin webbers, disc brakes all round, reclining front seats etc. alfa by Ted Bagshaw, on Flickr

14-08-2019, 20:11	#4
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Welcome aboard, great little place for help, info and banter

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode