Moved tow plugs

[R1cho]

I have at last got around to moving the tow plugs on the truck, the old ones were rotten through



while I was there a bunged in a reversing camera aswell for easier hitching of the tin tent

[Lazy-Ferret]

Nice and out the way up there. Only thing to double check is you might need longer leads on the caravan.

[R1cho]

Originally Posted by Lazy-Ferret

Nice and out the way up there. Only thing to double check is you might need longer leads on the caravan.

Thanks for the advice but I already checked it as they did look a bit short but have in fact got a nice reach on them

[Lazy-Ferret]

Originally Posted by R1cho

Thanks for the advice but I already checked it as they did look a bit short but have in fact got a nice reach on them

That's handy, just thought I would mention it...

My camera lead to the caravan is a one of those MOD screw together 7 pin jobbies, and it was over to one side of where the number plate used to be. Had it on there for 3 years, then one day, I was reversing the caravan in to a very tight position, and just as I really needed the camera, it went black... When I checked, with the car just short of being jackknifed, the wire could not quite reach that far across, and had pulled the socket off the back of the car, and snapped all the wires...

[R1cho]

lucky then, for now i just have one on the truck for hitching up with but later I plan on getting a duel camera wireless setup so I can use one camera to hitch up then switch channels to the second camera on the back of the van.

[jims-terrano]

Haha exact same location as I put the sockets on my old truck. Same camera location on my project truck. Guess what both my trucks are going to get the same too.