2002 t2 3.0 brake parts

staffdog · 03-03-2017, 20:44

Good evening all,
I'm looking for a pair or rear brake adjuster assemblies,( inside drum between the shoes) any chance anyone can help
Thanks Adrian

solarman216 · 03-03-2017, 21:36

I have loads up to around 2000 but the later ones are different, so keep an eye for that, Rick

staffdog · 04-03-2017, 22:30

Hi Rick , thanks for the info.
Are the whole adjuster assemblies different ? I only require the Adjuster screw x 2 to be honest, they look very similar to Nav to me though not got a Nav handy to open up & look.
Regards Adrian

solarman216 · 04-03-2017, 22:44

Quote:

Originally Posted by staffdog

Hi Rick , thanks for the info.
Are the whole adjuster assemblies different ? I only require the Adjuster screw x 2 to be honest, they look very similar to Nav to me though not got a Nav handy to open up & look.
Regards Adrian

From memory the whole rod is different much beefier and on the later models works whereas the earlier ones did not Rick

Banshee · 04-03-2017, 23:13

Quote:

Originally Posted by staffdog

Good evening all,
I'm looking for a pair or rear brake adjuster assemblies,( inside drum between the shoes) any chance anyone can help
Thanks Adrian

Hi mate and welcome

Is it part 12 you are looking for?

Banshee · 04-03-2017, 23:14

By the way, you can get the link to the Workshop Manual for the Terrano now you are a full member.

Here's the link

http://briggie.f9x.co.uk/workshop.html

solarman216 · 05-03-2017, 00:06

Quote:

Originally Posted by Banshee

Hi mate and welcome

Is it part 12 you are looking for?

No Zac that is the earlier version, Rick

staffdog · 06-03-2017, 22:15

Good evening Gents,
sorry not been on for a day or two, Rick the picture Zac has posted looks like my brake assemblies so there could be some sort of anomaly with whats on mine or is the later illustration the same ?
Zac you are quite correct Item 12 is what I'm looking for, actually only the threaded section with the ratchet wheel ( where the 2 arrows are ).
thanks again chaps
Adrian

solarman216 · 07-03-2017, 00:58

OK I will have a hunt round and see if I can find the bits you are thinking you need and take a pic or two, but I know for certain the later ones (2000 on) are different, Rick

staffdog · 07-03-2017, 21:08

Good evening gentlemen,
My truck is giving me more grief, does anyone have a pair of torsion bars with the Adjuster arm & lower arm housings, failed with the induction heater & i'm expecting to get brutal with gas axe tomorrow to get it all dismantled.
I have just remembered why I only do old French stuff for a living !!!
Thanks Adrian

03-03-2017, 20:44	#1
staffdog Junior Member Join Date: Mar 2016 Location: north yorkshire Vehicle: nissan terrano 3.0 sve Posts: 15	2002 t2 3.0 brake parts Good evening all, I'm looking for a pair or rear brake adjuster assemblies,( inside drum between the shoes) any chance anyone can help Thanks Adrian

03-03-2017, 21:36	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	I have loads up to around 2000 but the later ones are different, so keep an eye for that, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

04-03-2017, 22:30	#3
staffdog Junior Member Join Date: Mar 2016 Location: north yorkshire Vehicle: nissan terrano 3.0 sve Posts: 15	Re: rear Brakes Hi Rick , thanks for the info. Are the whole adjuster assemblies different ? I only require the Adjuster screw x 2 to be honest, they look very similar to Nav to me though not got a Nav handy to open up & look. Regards Adrian

04-03-2017, 23:14	#6
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	By the way, you can get the link to the Workshop Manual for the Terrano now you are a full member. Here's the link http://briggie.f9x.co.uk/workshop.html __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

07-03-2017, 00:58	#9
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,432	OK I will have a hunt round and see if I can find the bits you are thinking you need and take a pic or two, but I know for certain the later ones (2000 on) are different, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

06-03-2017, 22:15	#8
staffdog Junior Member Join Date: Mar 2016 Location: north yorkshire Vehicle: nissan terrano 3.0 sve Posts: 15	Good evening Gents, sorry not been on for a day or two, Rick the picture Zac has posted looks like my brake assemblies so there could be some sort of anomaly with whats on mine or is the later illustration the same ? Zac you are quite correct Item 12 is what I'm looking for, actually only the threaded section with the ratchet wheel ( where the 2 arrows are ). thanks again chaps Adrian

07-03-2017, 21:08	#10
staffdog Junior Member Join Date: Mar 2016 Location: north yorkshire Vehicle: nissan terrano 3.0 sve Posts: 15	2002 Brake Parts + extra items required Good evening gentlemen, My truck is giving me more grief, does anyone have a pair of torsion bars with the Adjuster arm & lower arm housings, failed with the induction heater & i'm expecting to get brutal with gas axe tomorrow to get it all dismantled. I have just remembered why I only do old French stuff for a living !!! Thanks Adrian

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode