Quick QnA

AlexD333 · 18-07-2014, 06:21

Mornin y'all

I'm taking a mate off-roading tomorrow, as a temp measure for when I get onto the soft stuff can i literally just disconnect my air intake pipe from the air box

The pipe with the maf, I could just face up above the box?

Fez_uk · 18-07-2014, 09:12

No disconnect the small plastic oval part that connect to the wing.

elty001 · 18-07-2014, 09:56

what fez says mate.
don't disconnect the filter from the engine or you run the risk of pulling crud and dust in there.

R1cho · 18-07-2014, 10:02

as above

firebobby · 18-07-2014, 11:13

Quote:

Originally Posted by elty001

what fez says mate.
don't disconnect the filter from the engine or you run the risk of pulling crud and dust in there.

He already has

It's supposed to be very wet this weekend Alex, so watch you dont such up to much water mate.

Paff · 18-07-2014, 11:15

Quote:

Originally Posted by firebobby

He already has

It's supposed to be very wet this weekend Alex, so watch you dont such up to much water mate.

He will just have to learn the hard way

AlexD333 · 18-07-2014, 23:30

How do i disconnect this front tube?

Just pull it off or what?

firebobby · 18-07-2014, 11:14

Quote:

Originally Posted by elty001

or you run the risk of pulling crud and dust in there.

He already has

It's supposed to be very wet this weekend Alex, so watch you dont such up to much water mate.

AlexD333 · 18-07-2014, 23:31

Quote:

Originally Posted by Fez_uk

No disconnect the small plastic oval part that connect to the wing.

Yeah, this bit sorry

elty001 · 19-07-2014, 08:08

there are a couple of clips/screws that hold the plastic tubing to the inner wing then it should pull off the front of the airbox.

AlexD333 · 19-07-2014, 08:13

Quote:

Originally Posted by elty001

there are a couple of clips/screws that hold the plastic tubing to the inner wing then it should pull off the front of the airbox.

Reckon I can cope with this?

elty001 · 19-07-2014, 08:27

this is where the plastic tubing connects to the inner wing.
this is what it should look like when you have removed it

18-07-2014, 06:21	#1
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Quick QnA Mornin y'all I'm taking a mate off-roading tomorrow, as a temp measure for when I get onto the soft stuff can i literally just disconnect my air intake pipe from the air box The pipe with the maf, I could just face up above the box?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

18-07-2014, 09:12	#2
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	No disconnect the small plastic oval part that connect to the wing.

18-07-2014, 09:56	#3
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	what fez says mate. don't disconnect the filter from the engine or you run the risk of pulling crud and dust in there.

18-07-2014, 10:02	#4
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	as above

18-07-2014, 23:30	#7
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	How do i disconnect this front tube? Just pull it off or what?

19-07-2014, 08:08	#10
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	there are a couple of clips/screws that hold the plastic tubing to the inner wing then it should pull off the front of the airbox.

19-07-2014, 08:27	#12
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	this is where the plastic tubing connects to the inner wing. this is what it should look like when you have removed it