Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 16-02-2014, 12:21   #1
bry
Senior Member
Click here to find out how to become a paid up member
 
Join Date: May 2013
Location: South Yorkshire..
Vehicle: Nissan Terrano MK 2 SE
Posts: 1,757
Default Parts Base

I found this.And thought it may be useful,Parts Numbers with diagrams.

http://www.partsbase.org/nissan/terr...tch-pedal-p-1/
bry is offline   Reply With Quote
Old 16-02-2014, 13:46   #2
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Fantastic find!!!!!!!!!

I hope rick comes along, if he does I'm still after bearing oil seal, pictured in this diagram part 40232



Websites like these come and go all the while, what I might do is save the pictures and make them available as a workshop download or a sticky in the Terrano/Maverick section

Even if the Nissan dealers don't recognize the parts numbers, at least when you go in asking for an obscure part they will have half a clue as to what to look for on Mainframe
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!

Last edited by Banshee; 26-07-2017 at 09:48.
Banshee is offline   Reply With Quote
Old 16-02-2014, 13:58   #3
dave123
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2013
Location: exeter devon
Vehicle: terrano 2 /2.7se tdi
Posts: 519
Default

Quote:
Originally Posted by Banshee View Post
Fantastic find!!!!!!!!!

I hope rick comes along, if he does I'm still after bearing oil seal, pictured in this diagram part 40232



Websites like these come and go all the while, what I might do is save the pictures and make them available as a workshop download or a sticky in the Terrano/Maverick section

Even if the Nissan dealers don't recognize the parts numbers, at least when you go in asking for an obscure part they will have half a clue as to what to look for on Mainframe
I got apair . I brought from Nissan but didn't need and they wouldn't take them back if you would like

Last edited by Banshee; 26-07-2017 at 09:48.
dave123 is offline   Reply With Quote
Old 16-02-2014, 15:57   #4
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Quote:
Originally Posted by dave123 View Post
I got apair . I brought from Nissan but didn't need and they wouldn't take them back if you would like
PM replied to
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Old 16-02-2014, 21:49   #5
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by Banshee View Post
Fantastic find!!!!!!!!!

I hope rick comes along, if he does I'm still after bearing oil seal, pictured in this diagram part
If you are still wanting a seal I will pull a hub tomorrow and get a number and see what I can do, Nissan pn is no good, only to Nissan, if my guy can get then I will order several as I am sure my off road motor will be needing a couple, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is online now   Reply With Quote
Old 17-02-2014, 21:55   #6
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by solarman216 View Post
If you are still wanting a seal I will pull a hub tomorrow and get a number and see what I can do, Nissan pn is no good, only to Nissan, if my guy can get then I will order several as I am sure my off road motor will be needing a couple, Rick
OK checked several seals and finally found one with numbers on, had them checked out, he new the manufacturer and type of seal (flanged) straight away, so I was full of hope, but he came back with the news that it is a protected part, this means that the manufacturer will only supply to whoever commissioned it in the first place, but what is interesting is the other seals I have with no number's, so I would guess there are other manufactures out there, but with no numbers we cannot find them, I have not checked but I guess the only way to get a seal from Nissan is to buy a complete bearing set at silly money, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is online now   Reply With Quote
Old 17-02-2014, 22:38   #7
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Quote:
Originally Posted by solarman216 View Post
OK checked several seals and finally found one with numbers on, had them checked out, he new the manufacturer and type of seal (flanged) straight away, so I was full of hope, but he came back with the news that it is a protected part, this means that the manufacturer will only supply to whoever commissioned it in the first place, but what is interesting is the other seals I have with no number's, so I would guess there are other manufactures out there, but with no numbers we cannot find them, I have not checked but I guess the only way to get a seal from Nissan is to buy a complete bearing set at silly money, Rick
Gutted

Good try though Rick
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Old 17-02-2014, 22:43   #8
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by Banshee View Post
Gutted

Good try though Rick
Reasonably priced bearings are available on Ebay some do not include a seal, but others do, so worth a search, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is online now   Reply With Quote
Old 16-02-2014, 19:05   #9
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
Default

Quote:
Originally Posted by bry View Post
I found this.And thought it may be useful,Parts Numbers with diagrams.

http://www.partsbase.org/nissan/terr...tch-pedal-p-1/
I've just realized mate, you've been looking at the wrong vehicle

The English Terrano2 2.7TDi that we know can be found here;

http://www.partsbase.org/nissan/terr...7ti-eub-se-mt/

There is also the auto version, 3.0l ZD30 and Patrol's as well

I'll create a linkable PDF like the workshop downloads once I've got all the pics
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Old 16-02-2014, 20:37   #10
bry
Senior Member
Click here to find out how to become a paid up member
 
Join Date: May 2013
Location: South Yorkshire..
Vehicle: Nissan Terrano MK 2 SE
Posts: 1,757
Default

Quote:
Originally Posted by Banshee View Post
I've just realized mate, you've been looking at the wrong vehicle

The English Terrano2 2.7TDi that we know can be found here;

http://www.partsbase.org/nissan/terr...7ti-eub-se-mt/

There is also the auto version, 3.0l ZD30 and Patrol's as well

I'll create a linkable PDF like the workshop downloads once I've got all the pics
Yeah its all on the same site,you just have to search for your particular motor..
bry is offline   Reply With Quote
Old 16-02-2014, 20:52   #11
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Good find, who has the capability to add this as a download?
AlexD333 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 15:32.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums