|
Members free classifieds and wanted items. Place your Nissan/Ford 4x4 vehicles or related items for sale and wanted here. |
|
Thread Tools | Display Modes |
|
03-01-2014, 14:33 | #1 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
Terrano Diesel Pump
As some of you know, my truck has been unwell for a while.
Stealers say its a little 3 pin unit held on the diesel pump with sheer bolts. Apparently, this doesn't come seperatly. Diesel pump part number; 167001f200 Mk1 non intercooler (square headlight) Terrano II, mechanical pump. Thanks in advance guys! |
03-01-2014, 15:08 | #2 | |
Moderator
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,526
|
Quote:
I can see if I can get a price for a replacement for you from James
__________________
Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! |
|
03-01-2014, 15:40 | #3 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
That would be awesome if you could!
|
03-01-2014, 16:27 | #4 |
Senior Member
Join Date: Nov 2009
Location: Norfolk, Poringland NR14
Vehicle: Terrano 3.0 SVE 2002
Posts: 1,549
|
FYI..here's a link for the Zexel VRZ (Bosch VP37) IP service manual in PDF.
It may only serve to confirm a replacement pump is the way to go! http://www.google.co.uk/url?sa=t&rct...58187178,d.ZG4
__________________
Remember what the dormouse said: Feed your head.... |
03-01-2014, 16:49 | #5 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
Although a fantastic piece of information, its not relevant to my pump.
Thanks anyway, but i think a pump replacement is on the cards anyway. Unless someone knows how to remove/bypass the immobilizer unit on the pump, that is! BTW, nissan part no: 167001f200 Bosch: 9460610791 |
03-01-2014, 16:57 | #6 |
Senior Member
Join Date: Nov 2009
Location: Norfolk, Poringland NR14
Vehicle: Terrano 3.0 SVE 2002
Posts: 1,549
|
Is yours a 3.0L (ZD30) engine?
__________________
Remember what the dormouse said: Feed your head.... |
06-01-2014, 00:00 | #7 |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
http://www.youtube.com/watch?v=uyxZ0sfPbB4
this clearly shows the fuel temp sensor that i think is causing your problem its right at the end of the clip http://www.youtube.com/watch?v=cTJHR9IZ2SM or an even better view and discription |
06-01-2014, 00:55 | #8 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
I appreciate your input, but the part th e dealers were referring to is on the outside of the case, has 3 wires to it, and is held on by sheer bolts, bolts whose head snaps off when you get them tight, pretty permanent anti tamper.
Gunna see if they can get the pump off if I can pick it up and see whaats under that cover.....pics when I get them! |
06-01-2014, 01:08 | #9 | |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
Quote:
|
|
06-01-2014, 08:03 | #10 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
The black plastic thing? Awesome! Try not to splatter it too much, I may need whatever it is!
|
06-01-2014, 16:01 | #11 |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
ok have taken off the black plastic cover with the wires attached and as i thought as this pump is for the TDI its just the electrical connections for the electronic acuator/throttle and cold start sensor.
infact the 3 wires on there own are the stop solenoid wire, fuel pressure sensor and something else yet to work out what so this pump i have is no good for you as its the TD im still at a loss im sure all you have on yours is pressure sensor, cold start, shut off solenoid and something that goes to the EGR? look on page 320 EC section of the manual it shows the pump for the tdi but clearly shows the injection timeing control valve and stop solenoid the only other wire you should have on yours is the cold temp sensor strange i cant find the td pump in the downloaded manual |
06-01-2014, 16:10 | #12 |
Senior Member
Join Date: Dec 2010
Location: south east
Vehicle: terrano 2 lwb
Posts: 816
|
search and ye shall find
http://himama.livejournal.com/pics/catalog/1591 some very good photos here you can clearly see every bit of the injection pump and associated parts it looks like the part they are saying is faulty is the speed controller/actuator if this is the same as your pump then its easy to change if you can get hold of a scrap pump |
06-01-2014, 20:53 | #13 |
Member
Join Date: Oct 2013
Location: North Yorkshire
Vehicle: Terrano II
Posts: 83
|
http://himama.livejournal.com/pics/catalog/1591/10901
It appears to be the plastic thing on the bottom of that pic, if its the part im lead to believe. No idea what it does, however, it looks important, so i'll try to stop the stealers breaking it off tomorrow! |
Thread Tools | |
Display Modes | |
|
|