Stereo back plate

bloat · 08-12-2013, 00:40

Hi all got this for the T2 but does anyone have a filler back plate so I can fit it?

Sweety · 08-12-2013, 02:08

If you have the large stereo you can get them on ebay but your looking at around £100

the single din factory ones need a trimming for the stereo cage to slide in

rakerman · 08-12-2013, 09:39

When I took the standard single DIN out of mine there was 2 brackets screwed to the side of it which went straight on to my Kenwood head unit so the cage and the trim that goes around its face weren't needed. If you search google there's instruction somewhere to remove the dash containing the stereo and heater controls etc and you fit stereo and put this dash panel back over the top of it if you can picture what I mean. All I needed was a harness adaptor for the steering wheel controls.

exosteve · 08-12-2013, 12:33

I made one out of a plastic choppin board and a 2 quid switch.
4 quid total. no way was I payin 110 quid for a bit of plastic with a switch in it

firebobby · 08-12-2013, 13:16

Quote:

Originally Posted by exosteve

I made one out of a plastic choppin board and a 2 quid switch.
4 quid total. no way was I payin 110 quid for a bit of plastic with a switch in it

I bet you were an avid Blue Peter fan in your younger days

zippy656 · 08-12-2013, 13:23

Quote:

Originally Posted by exosteve

I made one out of a plastic choppin board and a 2 quid switch.
4 quid total. no way was I payin 110 quid for a bit of plastic with a switch in it

This calls for
pics

Sweety · 08-12-2013, 19:39

Quote:

Originally Posted by rakerman

When I took the standard single DIN out of mine there was 2 brackets screwed to the side of it which went straight on to my Kenwood head unit so the cage and the trim that goes around its face weren't needed. .

My Sony wouldn't fit in as the screw holes wouldn't line up

Hoping Santa is going to bring me a nice new stereo

nothing really wrong with the one i've got but it's 6 years old now & I want bluetooth, USB etc

jims-terrano · 08-12-2013, 20:09

Darn it my stereo is the original cassette unit with a buggered display. I just switch on and see what happens, no need for a fancy plate on mine

trophymick · 08-12-2013, 20:28

Quote:

Originally Posted by jims-terrano

Darn it my stereo is the original cassette unit with a buggered display. I just switch on and see what happens, no need for a fancy plate on mine

Mine too.

These young uns don't know how to live on the edge.

Banshee · 08-12-2013, 15:17

Quote:

Originally Posted by Sweety

If you have the large stereo you can get them on ebay but your looking at around £100

the single din factory ones need a trimming for the stereo cage to slide in

Thankfully this had already been done on mine before I brought it

(RIP) PLANK · 08-12-2013, 16:50

I have a genuine Nissan adapter plate that came in one of my T2s and I just keep swapping it, is yours the one with the hazard button built into the stereo?

bloat · 09-12-2013, 00:07

Quote:

Originally Posted by PLANK

I have a genuine Nissan adapter plate that came in one of my T2s and I just keep swapping it, is yours the one with the hazard button built into the stereo?

Hi yes it is it seems like an expensive job this lol

rakerman · 09-12-2013, 00:41

Quote:

Originally Posted by bloat

Hi yes it is it seems like an expensive job this lol

Incartec.co.uk sells the fascia adaptor without a hazard switch for £24.99, or try cncfabs, he's breaking cupcakes 03plate so it should be single DIN.

08-12-2013, 00:40	#1
bloat Senior Member Join Date: Dec 2009 Location: shrewsbury(shropshire) Vehicle: Nissan terrano ll 2.7 tdi Posts: 288	Stereo back plate Hi all got this for the T2 but does anyone have a filler back plate so I can fit it?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-12-2013, 02:08	#2
Sweety Senior Member Join Date: May 2013 Location: Northumberland Vehicle: Terrano 2.7TDI SE LWB Posts: 3,604	If you have the large stereo you can get them on ebay but your looking at around £100 the single din factory ones need a trimming for the stereo cage to slide in

08-12-2013, 09:39	#3
rakerman Member Join Date: Dec 2010 Location: Scotland Vehicle: Terrano 3.0d commercial Posts: 70	When I took the standard single DIN out of mine there was 2 brackets screwed to the side of it which went straight on to my Kenwood head unit so the cage and the trim that goes around its face weren't needed. If you search google there's instruction somewhere to remove the dash containing the stereo and heater controls etc and you fit stereo and put this dash panel back over the top of it if you can picture what I mean. All I needed was a harness adaptor for the steering wheel controls.

08-12-2013, 12:33	#4
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	I made one out of a plastic choppin board and a 2 quid switch. 4 quid total. no way was I payin 110 quid for a bit of plastic with a switch in it

08-12-2013, 20:09	#8
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Darn it my stereo is the original cassette unit with a buggered display. I just switch on and see what happens, no need for a fancy plate on mine

08-12-2013, 16:50	#11
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	I have a genuine Nissan adapter plate that came in one of my T2s and I just keep swapping it, is yours the one with the hazard button built into the stereo?