No 1 injector with lift needle sensor wanted for 2.7TDi

Terranosaurus · 11-11-2013, 12:27

Am in need of the above, anyone got one or know a good place to buy them?

geoffdown · 11-11-2013, 14:15

Quote:

Originally Posted by Terranosaurus

Am in need of the above, anyone got one or know a good place to buy them?

Is urs bosch or Hitachi they r diff from what I no I got my bosch new injector from electro diesel in exeter for £115 +vat

dave123 · 11-11-2013, 14:27

Quote:

Originally Posted by geoffdown

Is urs bosch or Hitachi they r diff from what I no I got my bosch new injector from electro diesel in exeter for £115 +vat

where abouts in Exeter is that ? I live just outside Exeter and I have been told my needle lift sensor is failing

davenclaire · 11-11-2013, 15:05

just replaced mine bought it from a local factors £177 including vat then went back and bought the special tool to remove it another £14 but you wont get the injector out with out it, its a very slim special shaped socket for the bosh injector with sensor wire on.

the good news is its a simple job took about half an hour or so while your under the intercooler you may as well replace the leak off pipes if you havent done then in a while

geoffdown · 11-11-2013, 19:24

Quote:

Originally Posted by dave123

where abouts in Exeter is that ? I live just outside Exeter and I have been told my needle lift sensor is failing

where about I live in crediton do u no b&q warehouse is on souton go to the big postoffice sorting place and electro diesel is oppsite it

clivvy · 11-11-2013, 19:53

I made my own injector removal socket, use a standard injector socket, but angle grind off the end piece - has to be accurate though!

davenclaire · 11-11-2013, 20:39

Quote:

Originally Posted by clivvy

I made my own injector removal socket, use a standard injector socket, but angle grind off the end piece - has to be accurate though!

well done i did think about doing that but for 14 quid not worth cutting up a decent socket and buggering up my nice set now i have a nice new socket in the draw in the garage gonna have a go soon removeing the other injectors and cleaning them up not that the old one looked to shabby but iv yet to make a home tester to connect to it and see what the spray pattern is like

still looking on utube for ideas

11-11-2013, 12:27	#1
Terranosaurus Senior Member Join Date: Aug 2006 Location: YORKSHIRE Vehicle: 2001 2.7 TDi T2 SWB Posts: 4,077	No 1 injector with lift needle sensor wanted for 2.7TDi Am in need of the above, anyone got one or know a good place to buy them?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-11-2013, 15:05	#4
davenclaire Senior Member Join Date: Dec 2010 Location: south east Vehicle: terrano 2 lwb Posts: 816	just replaced mine bought it from a local factors £177 including vat then went back and bought the special tool to remove it another £14 but you wont get the injector out with out it, its a very slim special shaped socket for the bosh injector with sensor wire on. the good news is its a simple job took about half an hour or so while your under the intercooler you may as well replace the leak off pipes if you havent done then in a while

11-11-2013, 19:53	#6
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	I made my own injector removal socket, use a standard injector socket, but angle grind off the end piece - has to be accurate though!