Door trim removal (05)

[Sweety]

Hi guy's could do with a little info please, need to take off all the door trims on my 55 plate T2 to replace the speaker as i've blown the voice coils in the rears & the fronts are on their way out on the front doors I know there are screws around the out edge of the door trims & 2 screws by the inner door handle is there any more & do the trims just pop off like the old twin headlight models ? On the rear doors all I can find is 1 screw by the door handle is there any more & do they just pop off or does anything else have to be removed ?
Cheers in advance & i'll post up some pic's of the new speakers

[96terrano]

Originally Posted by Sweety

Hi guy's could do with a little info please, need to take off all the door trims on my 55 plate T2 to replace the speaker as i've blown the voice coils in the rears & the fronts are on their way out on the front doors I know there are screws around the out edge of the door trims & 2 screws by the inner door handle is there any more & do the trims just pop off like the old twin headlight models ? On the rear doors all I can find is 1 screw by the door handle is there any more & do they just pop off or does anything else have to be removed ?
Cheers in advance & i'll post up some pic's of the new speakers

pm me a pic of the door via face book and i'll tel you how to do it, it's probably the same as mine, they come off like the old ones

[Sweety]

Originally Posted by 96terrano

pm me a pic of the door via face book and i'll tel you how to do it, it's probably the same as mine, they come off like the old ones

The door trims are different on the later models plus all elec window switches are on the drivers door. The earlier ones I can get off in 2 mins

[96terrano]

Originally Posted by Sweety

The door trims are different on the later models plus all elec window switches are on the drivers door. The earlier ones I can get off in 2 mins

the switches will just be multi pin block connectors that you should just be able to pull out

[96terrano]

Originally Posted by 96terrano

the switches will just be multi pin block connectors that you should just be able to pull out

I really can't see Nissan changing how the doors are attached, that won't want to slash out on un needed manufacturing costs