cold start trouble.

exosteve · 16-01-2013, 21:31

after having trouble starting the truck on monday (just kept turning over and no fire) we ended up using (dont bollock me) easy start.
so we thought it was the glow plugs.
im no mechanic but takled the job myself and it still struggles to start.
had no choice but to use easy start again. it chuffed some smoke out ran lumpy for a bit then was great again.
the last thing i need at the mo is messing about with engines, I want to get in and go.
I dont want to use easy start as it kills engines.any thoughts of what to look at next?
I need it reliable

cncfabs · 16-01-2013, 21:33

Quote:

Originally Posted by exosteve

after having trouble starting the truck on monday (just kept turning over and no fire) we ended up using (dont bollock me) easy start.
so we thought it was the glow plugs.
im no mechanic but takled the job myself and it still struggles to start.
had no choice but to use easy start again. it chuffed some smoke out ran lumpy for a bit then was great again.
the last thing i need at the mo is messing about with engines, I want to get in and go.
I dont want to use easy start as it kills engines.any thoughts of what to look at next?
I need it reliable

Did you check that there was power getting to the glowplugs

R1cho · 16-01-2013, 21:42

where in the midlands are you?

makeitfit · 16-01-2013, 21:45

What truck have you got? TD or TDi ?
Check the g/p solenoid is ok and no missing or corroded wires.
Does the g/p light come on and go off?

clivvy · 16-01-2013, 22:04

I agree with the above, glow plug/relay first. Easy check. when cold, go put the key in the ignition, turn on but dont start, and do this with the bonnet open- Listen, you should hear the glow plug relay click, once, twice maybe etc, the glow plug ligh ton the dash should then go out, and your ready to start.

can you take a video perhaps??

exosteve · 17-01-2013, 08:39

Quote:

Originally Posted by R1cho

where in the midlands are you?

stoke on trent bud

exosteve · 17-01-2013, 08:40

Quote:

Originally Posted by cncfabs

Did you check that there was power getting to the glowplugs

i will get my mate check for power when i can catch him in.

stinka · 17-01-2013, 08:51

Yeah check for power to rail

I'm in Barlaston pal if u want to pop around, message me

exosteve · 17-01-2013, 17:20

I might take you up on that stinka.
it wouldnt start again first thing this morning. had no choice but to use the dreaded spray.
I had a listen for any clicking of the glow plug coils or anything and heard nothing so need to get that checked.
I also think the battery is too small for the truck.
hope i didnt buy another shed.
steve

davenclaire · 17-01-2013, 17:29

if you cant here the glow plug relay clicking then thats a good sign as its probely that, you could alway connect a jump lead from the + positive terminal of your battery to the buzz bar count to 10 then try and start it, if it fires up then your relay is proberly fooked.

iv not had a look inside one on these motors yet but they can be internally fused ie solderd to the circuit board inside its a simple job to run a by pass if this is the case.

try the jump lead trick 1st.

geoffdown · 16-01-2013, 22:07

Quote:

Originally Posted by exosteve

after having trouble starting the truck on monday (just kept turning over and no fire) we ended up using (dont bollock me) easy start.
so we thought it was the glow plugs.
im no mechanic but takled the job myself and it still struggles to start.
had no choice but to use easy start again. it chuffed some smoke out ran lumpy for a bit then was great again.
the last thing i need at the mo is messing about with engines, I want to get in and go.
I dont want to use easy start as it kills engines.any thoughts of what to look at next?
I need it reliable

are u running diesel or svo and as makeitfit said what engine td tdi or even the 3 di

Kamsin · 16-01-2013, 23:51

DONT USE EASY START......you truck will start to depend on it.

In addition to the above comments:-

If your using SVO, add some petrol to it, about 10%

Check conections on the glow plug rail, make sure they all clean.

Check fuel filter or just replace, costs about £8

Most people turn on ignition and then when glow plugs go out try to start, this is only the first warm, wait till the glow light goes out and listen for the "Click" or just count to 60, then try it.

Mines been a bugger in the cold but this starts it everytime.

exosteve · 17-01-2013, 08:39

morning everyone.
ive got to go out shortly and will have a listen to the soleniod thingy.
hope it starts today as I know easy starts a bad thing to use.
the glow plug light comes on and goes of as it should and ive given them a couple of warms before starting.
its a 2001 se+ (bit thick when it comes to cars(does tdi mean turbo deisel injection) or turbo deisel intercooler?)
its a td intercooler.
my local shop wanted 20 quid each for the plugs.
but I brought some from ebay for 24 quid for the set.
hope it wasnt false economy.

16-01-2013, 21:31	#1
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	cold start trouble. after having trouble starting the truck on monday (just kept turning over and no fire) we ended up using (dont bollock me) easy start. so we thought it was the glow plugs. im no mechanic but takled the job myself and it still struggles to start. had no choice but to use easy start again. it chuffed some smoke out ran lumpy for a bit then was great again. the last thing i need at the mo is messing about with engines, I want to get in and go. I dont want to use easy start as it kills engines.any thoughts of what to look at next? I need it reliable

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

16-01-2013, 21:42	#3
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	where in the midlands are you?

16-01-2013, 21:45	#4
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	What truck have you got? TD or TDi ? Check the g/p solenoid is ok and no missing or corroded wires. Does the g/p light come on and go off?

16-01-2013, 22:04	#5
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	I agree with the above, glow plug/relay first. Easy check. when cold, go put the key in the ignition, turn on but dont start, and do this with the bonnet open- Listen, you should hear the glow plug relay click, once, twice maybe etc, the glow plug ligh ton the dash should then go out, and your ready to start. can you take a video perhaps??

17-01-2013, 08:51	#8
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Yeah check for power to rail I'm in Barlaston pal if u want to pop around, message me

17-01-2013, 17:20	#9
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	I might take you up on that stinka. it wouldnt start again first thing this morning. had no choice but to use the dreaded spray. I had a listen for any clicking of the glow plug coils or anything and heard nothing so need to get that checked. I also think the battery is too small for the truck. hope i didnt buy another shed. steve

17-01-2013, 17:29	#10
davenclaire Senior Member Join Date: Dec 2010 Location: south east Vehicle: terrano 2 lwb Posts: 816	if you cant here the glow plug relay clicking then thats a good sign as its probely that, you could alway connect a jump lead from the + positive terminal of your battery to the buzz bar count to 10 then try and start it, if it fires up then your relay is proberly fooked. iv not had a look inside one on these motors yet but they can be internally fused ie solderd to the circuit board inside its a simple job to run a by pass if this is the case. try the jump lead trick 1st.

16-01-2013, 23:51	#12
Kamsin Senior Member Join Date: Dec 2010 Location: East Midlands Vehicle: Maverick 4x4 2.7 TDI 97 Posts: 1,211	DONT USE EASY START......you truck will start to depend on it. In addition to the above comments:- If your using SVO, add some petrol to it, about 10% Check conections on the glow plug rail, make sure they all clean. Check fuel filter or just replace, costs about £8 Most people turn on ignition and then when glow plugs go out try to start, this is only the first warm, wait till the glow light goes out and listen for the "Click" or just count to 60, then try it. Mines been a bugger in the cold but this starts it everytime.

17-01-2013, 08:39	#13
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	morning everyone. ive got to go out shortly and will have a listen to the soleniod thingy. hope it starts today as I know easy starts a bad thing to use. the glow plug light comes on and goes of as it should and ive given them a couple of warms before starting. its a 2001 se+ (bit thick when it comes to cars(does tdi mean turbo deisel injection) or turbo deisel intercooler?) its a td intercooler. my local shop wanted 20 quid each for the plugs. but I brought some from ebay for 24 quid for the set. hope it wasnt false economy.