my Terrano camper conversion

[96terrano]

480990_603160673044690_1094482435_n.jpg

[Lazy-Ferret]

Originally Posted by 96terrano

well i charged the battery up on me terrano and started it and everything works exept the interior lights dont shut off have to turn them off by pulling the fuse, think its the light timer again but apart from this, me new lighting works well

I would think that with all that extra current from all the new bulbs, you have blown the output transistor of the dimmer.

You will either:-
Need to change the bulbs to non-canbus led's, so you reduce the current being drawn from it.
Take some off the dimmer, and add them on a relay, so they just turn on and off without dimming,
Or, have a look in the timer/dimmer unit and see if you can uprate the output transistor so it can cope with the extra current.

[96terrano]

Originally Posted by Lazy-Ferret

I would think that with all that extra current from all the new bulbs, you have blown the output transistor of the dimmer.

You will either:-
Need to change the bulbs to non-canbus led's, so you reduce the current being drawn from it.
Take some off the dimmer, and add them on a relay, so they just turn on and off without dimming,
Or, have a look in the timer/dimmer unit and see if you can uprate the output transistor so it can cope with the extra current.

sorted, was a bad earth

all the extra lights are on a separate circuit

[rustic]

Originally Posted by 96terrano

Attachment 3354

Come on Ryan, you can do a neater job with that trim around the sun roof.

Remove the strip from that far corner, and back to the loose end.

NOW...
Start with butt joining the ends, then work the trim into the corners, you will find that with a good push that corner will fit properly, and there will be no overlap or gap at the butt ends.

PS
I like your lights at the side.

The Mav does suffer from not having enough light over the driver, to say even read a map.
Where are they from?

Best regards,

Rustic

[96terrano]

Originally Posted by rustic

Come on Ryan, you can do a neater job with that trim around the sun roof.

Remove the strip from that far corner, and back to the loose end.

NOW...
Start with butt joining the ends, then work the trim into the corners, you will find that with a good push that corner will fit properly, and there will be no overlap or gap at the butt ends.

PS
I like your lights at the side.

The Mav does suffer from not having enough light over the driver, to say even read a map.
Where are they from?

Best regards,

Rustic

its back in properly now lights are the number-plate illuminations from a rover 100 metro

[96terrano]

switch for overhead sunroof lights, switch is illuminated blue and mounted in center console

225434_603197216374369_1573792788_n (1).jpg

[96terrano]

Interior is all finished and rebuild, exept the rear quater panels in the boot, still wiring, now I can start building my bed and floor storage also there's no carpet as I'm doing somthing different

[jims-terrano]

Originally Posted by 96terrano

Interior is all finished and rebuild, exept the rear quater panels in the boot, still wiring, now I can start building my bed and floor storage also there's no carpet as I'm doing somthing different

Cool he's gonna do laminate on the floor

Hey well done so far

[makeitfit]

Ryan this could be different http://www.google.co.uk/imgres?hl=en...&tx=101&ty=106

[stinka]

Originally Posted by makeitfit

Ryan this could be different http://www.google.co.uk/imgres?hl=en...&tx=101&ty=106

Lol, they do some great themed flooring for kids rooms

[makeitfit]

Originally Posted by stinka

Lol, they do some great themed flooring for kids rooms

That's what I thought

[96terrano]

Originally Posted by stinka

Lol, they do some great themed flooring for kids rooms

Awww yeah brill idea

I'm wanting to do a rubber floor like you find in horse boxes so it can be remover and hosed out easily

[briggie]

rubber ? ..... hm

[makeitfit]

Originally Posted by 96terrano

Awww yeah brill idea

I'm wanting to do a rubber floor like you find in horse boxes so it can be remover and hosed out easily

Here you go boyo 2m of this should do it http://www.ebay.co.uk/itm/1209315219...84.m1423.l2649

[Fez_uk]

just use some rubber floor mats.