Your businesses and what you do!..

[solarman216]

Originally Posted by makeitfit

Biscuit joint it and only glue if it's a short length. You should allow for the oak to move. So a good silicone will suffice for the joint and then bolt clamps to keep the joint tight

Thanks for that Pete, it is Iroko, and the join will be 600 mm corner and I am not sure about the oiling as it will/may effect the bond, it also has a Belfast sink that they have designed the WT to "but" to the sides and back of the sink with no WT at the front and about 10 mm higher but the sink is not perfectly straight on the sides, I think it would have been better to have the WT sitting on the sink, what are your thoughts, Rick