PDA

View Full Version : Terrano starter motor replacement.


Seanv
11-12-2009, 17:53
Hi there, can anyone provide any tips or advice on how to replace the starter motor on a 98 diesel terrano?

Terranosaurus
11-12-2009, 18:05
Take the wheel off and remove the rubber splash guard then you can get directly at the starter motor. Other than that its just like any other starter motor - disconnect battery before you start.

Seanv
11-12-2009, 19:00
Blimy, is it that easy? Looked a nightmare from above! Thanks for that great info - cheers, Sean V.

clivvy
12-12-2009, 00:16
when I did mine recently, it was out from above for the old one, and back in the same way. I found that I couldnt get mine out the side because of TWO pipes that I couldnt move. Out from above gets tricky again because of a couple of solid pipes, but you just wiggle it and it pops out nicely. Definatley need to access from the wheel though because of the bottom bolt.

Seanv
14-12-2009, 18:04
Thanks for that, I've just removed the motor from the block, was wondering which direction it should go! I must say, the old girls 11 years old & the two bolt threads were like new. I was able to wind them out with me fingers - quality!