PDA

View Full Version : gear box not changing properly, What ATF plz?


cjustice
27-11-2009, 01:47
Just bought a terrano II 95M and when driving it it seemed to be not changing gear right although it does change gear? If hold full throttle on it dont change gear until revs are released. So if driving up hill and put under load it does not back down a gear when reving but stays in same gear as approching. It will go through all gears but have to back off on the gas each time to get a gear change?

Deleted account DD
27-11-2009, 09:26
So the summary is revs to idle when changing gear?

Any graunching noises at all?

tezzer
27-11-2009, 09:35
could it be the kickdown cable needs adjusting, as it seems to be hold gears??
just a thought.:thumb2

bobbee
27-11-2009, 14:04
i got the same prob. how do you adjust kick down cable:nenau

zippy656
27-11-2009, 14:18
talk a look in the manual, you might be able to see then

supertaff
27-11-2009, 14:58
Daft question ... it's not a case of the switch on the dash being in "Hold" or "Economy" position , is it?

cjustice
04-12-2009, 21:18
Just bought a terrano II 95M and when driving it it seemed to be not changing gear right although it does change gear? If hold full throttle on it dont change gear until revs are released. So if driving up hill and put under load it does not back down a gear when reving but stays in same gear as approching. It will go through all gears but have to back off on the gas each time to get a gear change? I found the problem!! sneaky filter in the banjo limiting the fuel and so engine had no beans!! sneaky sneaky sneaky, what a place to put a second fuel filter!

cjustice
04-12-2009, 21:19
many thanks for help

zippy656
04-12-2009, 21:55
did you do it the easy way or the hard way??

tezzer
05-12-2009, 01:23
whats the easy way zipps, i thought it was a bitch of a job,? :nenau:thumbs