PDA

View Full Version : pug 306 d turbo immobilsed ... help

extreme-4x4
11-09-2009, 12:32
its a key start not the key pad
the facelift model on an R plate

have fuel to pump but not out.
recon its immobilised ....can it be bypassed


thanks in advance
Paul
11-09-2009, 12:40
Give those a shout, had loads of help in the past from them..:thumb2
http://www.pug306.net/forum/
tezzer
11-09-2009, 13:30
run a wire direct to pump, and see if that works. :thumb2

best thing is the scrapage deal mate.
Adz
11-09-2009, 21:23
Its French :augie
zippy656
11-09-2009, 21:40
Its French :augie


nuf said
Adz
11-09-2009, 21:47
:clap

:thumbs

:D
jimmy92
11-09-2009, 22:07
Have you fitted a new pump to the engine/car and you cant get diesel up to the injectors?
extreme-4x4
11-09-2009, 22:31
think we done it.
cut cover off the solenoid and run a live feed to it. now we have fuel to the injectors, still a bugger to start, but it does start ,now

bought a dead 306 so just fiddling really, but think the imobiliser just started playing up
jimmy92
11-09-2009, 22:36
I fitted a pump to one and that solenoid behind the cover you cut off shuts down wen it doesnt recognise the new ecu. i managed to find a replacement solenoid that went straight in with one wire feed and bin the one on you have. :thumb2
extreme-4x4
11-09-2009, 23:05
easy fix then. got hole in rad too so hope the head gasket ok

but got it dirt cheep so if all fails a new engine or scrap it i wont loose much