Breaking Terrano 2 and Mavericks

[CaptLimey]

Hi cncfabs

I need two rear drums for a '96 T2, the 254X65 mm ones (size is cast into the inner face of the drum, usually 255mm) and a rear right hand seat belt for the seat adjacent to the driver's side rear door on a RHD model.

Please PM or post with price and payment method - Pay Pal preferred. Need them ASAP for delivery to WD31NH, because visiting family will bring them to France for me.

Regards CL

[cncfabs]

hi, i need for SWB the rear load cover, and possibly a cps sensor for my 97 2.7 tdi...unless the codes show a faulty cps of course!
Sorry mine are td not tdi ive had 4 terranos never seen a load cover yet!

[harlowmaverick]

im looking for wheels and tyres to have a play off road, what are your ones like and if you have a set that would suit can you post a pic or two on here of them please

[cncfabs]

im looking for wheels and tyres to have a play off road, what are your ones like and if you have a set that would suit can you post a pic or two on here of them please
They are all road tyres have the alloys as seen in the pic and also set of steels none of the tyres are great

[cncfabs]

Hi cncfabs

I need two rear drums for a '96 T2, the 254X65 mm ones (size is cast into the inner face of the drum, usually 255mm) and a rear right hand seat belt for the seat adjacent to the driver's side rear door on a RHD model.

Please PM or post with price and payment method - Pay Pal preferred. Need them ASAP for delivery to WD31NH, because visiting family will bring them to France for me.

Regards CL
The drums i have are 255mm

[CaptLimey]

The drums i have are 255mm

They'll do fine. I also need the seat belt for the rear passenger behind the driver on a RHD LWB T2. I can pay by Pay Pal. I'll PM you with my email address.

Many thanks CL.

[harlowmaverick]

i need to replace both my rear bumper tail lights, do you have a good pair going and how much?
cheers
phil

[harlowmaverick]

dont mean to pester but any idea on the 2 rear bumper lamps with their wiring looms?

[elty001]

i'm after the two brackets that bolt to the floor for the third row bench seat.
i need the later type ones with the red clips so i can totaly remove the seat but leave the brackets in situ.
if you have them how much plus postage to derbyshire:thumbs

[cncfabs]

i'm after the two brackets that bolt to the floor for the third row bench seat.
i need the later type ones with the red clips so i can totaly remove the seat but leave the brackets in situ.
if you have them how much plus postage to derbyshire:thumbs
Will check tomorrow to see what type of brakets i have will send you a message then

[zippy656]

i'm after the two brackets that bolt to the floor for the third row bench seat.
i need the later type ones with the red clips so i can totaly remove the seat but leave the brackets in situ.
if you have them how much plus postage to derbyshire:thumbs


oh sounds like a good idea, get two sets??

[cncfabs]

i'm after the two brackets that bolt to the floor for the third row bench seat.
i need the later type ones with the red clips so i can totaly remove the seat but leave the brackets in situ.
if you have them how much plus postage to derbyshire:thumbs
Checked the seats they all have the bolt in type Sorry

[zippy656]

any got a load net on the back door?

[lacroupade]

any got a load net on the back door?

I think only the facelift square headlight has loadnets zIP...they're an integral part of the door card and they are, how can I put it now...oh yes.....CRAP!

[zippy656]

ok.. thanks..

save my money then

[harlowmaverick]

hi there stephen,
£35 sent just now via paypal.
can you please send these out today if possible.
many thanks
phil

[cncfabs]

hi there stephen,
£35 sent just now via paypal.
can you please send these out today if possible.
many thanks
phil
Many thanks posted today via special delivery so hopefully will miss the strikes.

[harlowmaverick]

thankyou very much, another good deal gone down!:thumb2

[harlowmaverick]

many thanks, i had the postman at my door this morning with a box of lights!:thumb2
good man to do business with
regards
phil

[paulp]

Make you right harlowmaverick


sound fellow. :thumb2 :thumb2

Gutted my alternator did not fit as it was exactly as described.

regards paulp

[CaptLimey]

cncfabs did it for me! Thanks Stephen. Good man to do business with - as they - and I - say!

Regards CL

[elty001]

Checked the seats they all have the bolt in type Sorry

o.k mate thanks for the reply:thumbs

[peter277]

hi after a drivers seat with lumbar support to fit on passenger side for wifes bad back,mine are grey leather can you help? if i could fit it to passenger seat myself would buy just the parts if that works? ta peter

[R3M]

alright,

I am on and off here at the moment, but at the last count I was told I need a water pump, thermostat and two front drive shafts for a R3M jap import.

1, do you know if the english stuff fit??
2, how much??

I need to put my truck back on the road and soon.

Cheers


Bryn

[cncfabs]

alright,

I am on and off here at the moment, but at the last count I was told I need a water pump, thermostat and two front drive shafts for a R3M jap import.

1, do you know if the english stuff fit??
2, how much??

I need to put my truck back on the road and soon.

Cheers


Bryn
Hello
I have all the parts for a terrano 2 but i have no idea if they would fit your R3M maybe someone on here knows???

[harlowmaverick]

dont suppose you have a spare one floating around for my beast?
if so please pm me
phil

[supertaff]

Have you got an A Bar/Bull Bar to fit a 1999 (V Reg) Terrano II (Round Headlight Model ?
Thanks, Matt.

[elty001]

i'm after a drivers door mirror,interior mirror(rear veiw)and a drivers door lock and keys.
if you have them could you give me a price to deliver to de55 7jy
cheers elt.

[bobbee]

hi mate. does the indicator stalk have the speed adjuster for intermittent on the end? i got a mistral td but i think the stalk cluster will fit. how much for the whole cluster(to where it plugs into column) and postage to kent? pay by paypal

[dinky]

Need a rear seatbelt for boot area on a lwb on passenger side plus cover for alarm sensor in roof on driver side .Ta
JD

[bobbee]

sorry mate head up my bum today. i meant wiper stalk not indicator stalk

[cncfabs]

Should have one will check and get back to you

[cncfabs]

sorry mate head up my bum today. i meant wiper stalk not indicator stalk
Hello
Yes have a wiper stalk £25 inc delivery.
Regards
Stephen

[cncfabs]

Need a rear seatbelt for boot area on a lwb on passenger side plus cover for alarm sensor in roof on driver side .Ta
JD
Hello
Yes have the seatbelt £20 inc delivery.
Regards
Stephen

[cncfabs]

Have you got an A Bar/Bull Bar to fit a 1999 (V Reg) Terrano II (Round Headlight Model ?
Thanks, Matt.
Sorry i have sold the bull bar

[dinky]

You have p.m.

[harlowmaverick]

what about my radiator expansion tank cap?
i was first in the queue :augie :thumbs

[cncfabs]

what about my radiator expansion tank cap?
i was first in the queue :augie :thumbs
Yes have one will post out tomorrow is your address still same

[harlowmaverick]

yes it is buddy, how much do you want for it?
regards
phil
p.s. merry xmas! :clap

[cncfabs]

yes it is buddy, how much do you want for it?
regards
phil
p.s. merry xmas! :clap
Dont worry about it you had some bits off me before.
Merry christmas
Stephen

[harlowmaverick]

thats very kind of you sir!
as i said before, one of the good guys:thumb2
regards
phil

[mikep]

Do you have an ashtray available?it is for a 53 reg. but i am led to believe they are the same fit for all years.Let me know price and postage and will either send cheque or figure out to pay by pay-pal.
thanks Mike

[cncfabs]

Do you have an ashtray available?it is for a 53 reg. but i am led to believe they are the same fit for all years.Let me know price and postage and will either send cheque or figure out to pay by pay-pal.
thanks Mike
Hello
Yes have an ashtray available its from 1995 model i dont know if it fits yours £8 inc 1st class delivery if its any good to you

[cncfabs]

Also now have another 1995 maverick 2.4 petrol for breaking
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0101BLACK_MAVERICK0015.jpg

[dinky]

Parcel arrived today,cracking service.If you ever get a set of Mistral wind deflectors will have em of you.Thanks JD:thumbs

[danielj]

Any set of 15 inch wheels, preferably alloys. And will you ship them to Ireland?

[cncfabs]

Any set of 15 inch wheels, preferably alloys. And will you ship them to Ireland?
Hello
Can ship to ireland by pallet but delivery would cost £100 set of 4 wheels £100 would see if you can get them locally if possible

[Muckypup]

Hello!!!!
Im looking for a passenger side rear cluster if you have one. With postage price please :thumb2

[cncfabs]

Hello!!!!
Im looking for a passenger side rear cluster if you have one. With postage price please :thumb2
Is that the bumper light

[Muckypup]

Is that the bumper light

Sorry, forgot theres two lol! Yes the one in the bumper with the side lights, my bulb holder disintegrated!:doh

[danielj]

Hello
Can ship to ireland by pallet but delivery would cost £100 set of 4 wheels £100 would see if you can get them locally if possible

Thanks for that anyway. Is it only Terranos / Mavericks you have.

[CaptLimey]

Hi Fabs - you got any 'chrome' plastic hub caps for my '96 T2's 15" alloys? I need three with the internal circular spring that keeps them on OR in my case doesn't!
Rgds CL

[cncfabs]

Sorry, forgot theres two lol! Yes the one in the bumper with the side lights, my bulb holder disintegrated!:doh
Yes have good one available £24 inc delivery

[cncfabs]

Hi Fabs - you got any 'chrome' plastic hub caps for my '96 T2's 15" alloys? I need three with the internal circular spring that keeps them on OR in my case doesn't!
Rgds CL
Hello
All the terrano's i have with alloys are mavericks so have ford written on them

[cncfabs]

Thanks for that anyway. Is it only Terranos / Mavericks you have.
Do have some other cars normally i have terrano's fourtraks or saabs

[harlowmaverick]

Thanks again cncfabs!!!
i recieved the cap today, spot on as always and i would recommend you to anyone to deal with.
top fella and look forward to buying you a pint one day!
phil
merry christmas

[CaptLimey]

Hello
All the terrano's i have with alloys are mavericks so have ford written on them

Hi Fabs
Thanks for the reply. I'm not too concerned about the name as I could always paint it over just as long as they fit and cover my auto hubs and rear brake drum faces. Any chance of a picture?
Rgds CL

[el_hefe]

You got any grey leather 6+7 seat rear bench?? Silly me didnt lift up the rear seat when i bought mine and it is not leather... I´m a bit fussy like that and would like it to match lol.

Also could do with the lid/armrest for centre console

[cncfabs]

You got any grey leather 6+7 seat rear bench?? Silly me didnt lift up the rear seat when i bought mine and it is not leather... I´m a bit fussy like that and would like it to match lol.

Also could do with the lid/armrest for centre console
Sorry i dont all mine are fabric trim

[supertaff]

Have you got 2 alloy wheels available ? Doesn't mind what the tyres are like, as I've got road type treads on my Terrano, and looking for 2 spare wheels to put decent treads on.
Thanks, Matt.

[cncfabs]

Have you got 2 alloy wheels available ? Doesn't mind what the tyres are like, as I've got road type treads on my Terrano, and looking for 2 spare wheels to put decent treads on.
Thanks, Matt.
Yes got loads of alloys would you be able to collect (junc. 22 m5) somerset

[Freebird]

Looking for the two headrests from the centre seats, none in the vehicle when i bought it, can you give me a price for these please, thanks.

[cncfabs]

Looking for the two headrests from the centre seats, none in the vehicle when i bought it, can you give me a price for these please, thanks.
Hello
Price for two headrests from the centre seats £20 inc delivery

[cncfabs]

Hi Fabs - you got any 'chrome' plastic hub caps for my '96 T2's 15" alloys? I need three with the internal circular spring that keeps them on OR in my case doesn't!
Rgds CL
Checked all my stock none have an internal clip and dont look to me like they are designed to have one pics below
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0046.jpg
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0048.jpg

[Freebird]

Hello
Price for two headrests from the centre seats £20 inc delivery

Spot on there thanks, how do i pay you etc etc etc???

[cncfabs]

Spot on there thanks, how do i pay you etc etc etc???
PM sent

[CaptLimey]

Checked all my stock none have an internal clip and dont look to me like they are designed to have one pics below
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0046.jpg
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0048.jpg

Hi Fabs
Thanks for the photo. I think we're going down parallel paths, that, like railway lines will never meet! My hub caps are totally different from you photo. I'll post you a shot of mine in a couple of days and if you have any I'll be interested.
Happy new year!!
Regards CL

[Freebird]

PM sent
Done and dusted, thanks:thumb2

[jj132cars]

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts
Hi
have you got the A frame for sale?
If so how much are you looking for it?
JJ132cars :)

[cncfabs]

Hi
have you got the A frame for sale?
If so how much are you looking for it?
JJ132cars :)
Sorry already sold it

[supertaff]

Regarding wheels, yes, I can have a spin over sometime ... How much each for the wheels ?
Thanks, Matt.

[cncfabs]

Regarding wheels, yes, I can have a spin over sometime ... How much each for the wheels ?
Thanks, Matt.
Price for decent alloys £20 each

[supertaff]

If you can P.M. me your address & contact number , I'll pop over to pick them up. Will phone to arrange a time & day.
Thanks, Matt.

[Freebird]

Parcel arrived this morning, Thank you a pleasure to do buisness with you. :thumb2


Now looking for a bonnet that hasn't got extra air vents!!!!!

[cncfabs]

Parcel arrived this morning, Thank you a pleasure to do buisness with you. :thumb2


Now looking for a bonnet that hasn't got extra air vents!!!!!
Got some bonnets mk1 but i have never found a courier that would take one unless someone on here knows of one ????

[Freebird]

Got some bonnets mk1 but i have never found a courier that would take one unless someone on here knows of one ????

I use Paisley Freight Services they take bonnets, what style is a mk 1 bonnet?

[cncfabs]

I use Paisley Freight Services they take bonnets, what style is a mk 1 bonnet?
Its the one pre intercooler model without the air scoop

[Freebird]

Its the one pre intercooler model without the air scoop

That will fit my 96 one then, how much for a bonnet? please.

[CaptLimey]

Checked all my stock none have an internal clip and dont look to me like they are designed to have one pics below
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0046.jpg
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106resistor0048.jpg

Hi Fabs
Here's a shots of my remaining hub-cap. It's +/- 130 mm in diameter and when stood face up +/- 62mm high, the internal retaining ring (or in my case non-retaining ring) is +/- 105 mm in diameter. If you have four I'll be interested in buying.
Regards CL

[tobias]

hi,
have you got a passenger side elec mirror (black).
thanks
tobias

[cncfabs]

hi,
have you got a passenger side elec mirror (black).
thanks
tobias
Sorry i dont at the moment will get back to you when i have

[clivvy]

heres a thought....are the rear sills removable? lol, I doubt it but hey, gotta ask!

[makeitfit]

Ofcourse, you just need a plasma cutter:sly
Or you could chew one off with a good grinder, that's not Adz by the way:lol

[clivvy]

:eek:

[cncfabs]

heres a thought....are the rear sills removable? lol, I doubt it but hey, gotta ask!
Its possible but would be far easier to fabricate some new pieces any garage doing mot welding should be able to do that for you

[R1ANW]

Hi, do you have a Clutch Pedal Bracket ..?

[cncfabs]

Hi, do you have a Clutch Pedal Bracket ..?
Is this the correct part
http://i137.photobucket.com/albums/q204/stephenhudson/2002_0106clutch0069.jpg

[R1ANW]

Looks good. I've sent you a PM. Cheers.

[Bruttas]

May seem like a daft one but im after an interior light switch, you know the little button thing that makes the interior light come on when you open the door, also the fan speed controler thing that blow thats under the passenger side dash.
If you can help can you please let me know, thanks
Dave
1998 Maverick

[Toons37uk]

Hi

I need the clip that retains the passenger side sun visor. Not the 'hinge' side, it's the clip next to the interior mirror.

Grey plastic would be nice, with screws even better.

Piddly little part but......

Cheers

Tony

[paulp]

Hi have you got a D/s front wind deflector

regards paulp

[cncfabs]

PM'S sent re last 3 posts

[Darwin]

how much for a set of injectors ?

[cncfabs]

how much for a set of injectors ?
Sorry sold all the injectors

[dinky]

Have you got front towing hook .complete with bolts as mine has,nt got one.JD

[cncfabs]

Have you got front towing hook .complete with bolts as mine has,nt got one.JD
Is this the right one (have the bolts also)
http://i137.photobucket.com/albums/q204/stephenhudson/towinglug.jpg

[dinky]

yes

[dinky]

Rscieved this morning,thanks stephen for sending out quickly.JD:thumbs

[makeitfit]

Have you got a drivers side drive shaft cv and gaiter in good nick please?
I seem to have abused mine a bit too much at the weekend :augie

[cncfabs]

Have you got a drivers side drive shaft cv and gaiter in good nick please?
I seem to have abused mine a bit too much at the weekend :augie
Hello
Will do the complete driveshaft £30 inc delivery

[makeitfit]

Hello
Will do the complete driveshaft £30 inc delivery
PM me your email etc and I'll paypal it over. Cheers :cool:

[mikep]

Hello. cncfabs
Have you got an ashtray going spare ? and if so how much + P&P. Have been looking for a while now,but as a non-smoker it is not urgent.Would be useful for storing junk though.

Thanks
Mike.

[cncfabs]

Hello. cncfabs
Have you got an ashtray going spare ? and if so how much + P&P. Have been looking for a while now,but as a non-smoker it is not urgent.Would be useful for storing junk though.

Thanks
Mike.
Hello
Yes have an ashtray from mk1 t2 beleive they are all the same £8 inc delivery

[mikep]

Thats good news:clap How can I pay you? If you PM your address I will send cheque,or can you use paypal,as I am registered. Mind you I have waited long enough for this so sending a cheque would only take a few days to turn around,and paypal would want their cut!
Let me know what you want me to do ref. payment
Thanks
Mike

[zippy656]

Hello
Yes have an ashtray from mk1 t2 believe they are all the same £8 inc delivery


TOTALLY USELESS INFO

did you know theres a mark on the ashtray to say WHEN the ash tray was made.. some times a sticker as to when it was fitted into the car as well..

so giving a date of Assembly of you car...

see totally useless !

[cncfabs]

TOTALLY USELESS INFO

did you know theres a mark on the ashtray to say WHEN the ash tray was made.. some times a sticker as to when it was fitted into the car as well..

so giving a date of Assembly of you car...

see totally useless !
So are you saying that there are different types?

[zippy656]

Hi Bud, i was just saying you can tell when your ashtray was made and in my case ( ive a sticker ) the date my car was assembuled..

[cncfabs]

Does anyone know for sure if this will fit 2003 model
http://i137.photobucket.com/albums/q204/stephenhudson/ashtray.jpg

[zippy656]

mine from a 1999 sames im sure.


any one know if theres a change from earlyer...

[tolan]

Hi do you have a good 2.4 petrol engine?

[cncfabs]

Hi do you have a good 2.4 petrol engine?
Yes done just over 100k very good runner £150 collected price

[mikep]

Thanks Zippy.
The chances are it will fit,anyway have now sent payment off to cncfabs. You are certainly on the ball with pics and advice.Really do appreciate this and the rest of the "stuff" from the site in general.
Thanks again
Mike.

[Muckypup]

Hi,
Im looking for a fuel tank c/w pump for a 1993 Maverick 2.4i petrol. Have you got one and how much would it be? Would have to be in good nick and the pump removable so I can give the inside a good clean prior to fitting.
I suspect my tank is full of crap and the pump is getting knackered. Went to take the pump out to check it and the top of the tank and bolts for the pump are seriously corroded and dont want to risk trying anything without a spare to hand! :doh

[cncfabs]

Hi,
Im looking for a fuel tank c/w pump for a 1993 Maverick 2.4i petrol. Have you got one and how much would it be? Would have to be in good nick and the pump removable so I can give the inside a good clean prior to fitting.
I suspect my tank is full of crap and the pump is getting knackered. Went to take the pump out to check it and the top of the tank and bolts for the pump are seriously corroded and dont want to risk trying anything without a spare to hand! :doh
Hello
The problem you are having removing the bolts from the top of the tank is typical i dont have a good tank you should be able to get the bolts off i use a hex socket usually next size down from original due to corrosion.Have you tried draining the tank from the plug on the bottom to let the dirt out?.I do have a good pump available if you need one on the plus side the pimp just unclips from the bottom of the tak once you have removed the lid. Good luck

[Soggydog]

Hi CNC

I'm looking for a Fuel Injector Pump for a non-intercooled (1995) Terrano 2.7, specifically the diaphragm cover plate (held on with 4 bolts and just visible under the manifold). If needs be I'll be interested in the whole pump, but would prefer the plate only. Also have you a glove box lid in grey please, LWB model.
Thanks

[cncfabs]

Hi CNC

I'm looking for a Fuel Injector Pump for a non-intercooled (1995) Terrano 2.7, specifically the diaphragm cover plate (held on with 4 bolts and just visible under the manifold). If needs be I'll be interested in the whole pump, but would prefer the plate only. Also have you a glove box lid in grey please, LWB model.
Thanks
Hello
Sorry ive sold all the pumps i had have the glove box lid £8 inc delivery

[zippy656]

Thanks Zippy.
The chances are it will fit,anyway have now sent payment off to cncfabs. You are certainly on the ball with pics and advice.Really do appreciate this and the rest of the "stuff" from the site in general.
Thanks again
Mike.


i can some time do good stuff too.. though not alot.. i to try..

Mrs says Im very "tyring!"

[Soggydog]

Hi CNC

I'm looking for a Fuel Injector Pump for a non-intercooled (1995) Terrano 2.7, specifically the diaphragm cover plate (held on with 4 bolts and just visible under the manifold). If needs be I'll be interested in the whole pump, but would prefer the plate only. Also have you a glove box lid in grey please, LWB model.
Thanks

[makeitfit]

Have you got a decent starter motor for my truck pleeeeease?

[Soggydog]

Hello
Sorry ive sold all the pumps i had have the glove box lid £8 inc delivery

Thanks - PM me the details and I'll paypal the money to you.

[cncfabs]

Have you got a decent starter motor for my truck pleeeeease?
Have a couple of starters for td but both came from knackered engines so i have no way of testing them under load

[makeitfit]

Have a couple of starters for td but both came from knackered engines so i have no way of testing them under load
How much for one then? If it doesn't work I'll send the Taffia round :lol

[Muckypup]

Hello
The problem you are having removing the bolts from the top of the tank is typical i dont have a good tank you should be able to get the bolts off i use a hex socket usually next size down from original due to corrosion.Have you tried draining the tank from the plug on the bottom to let the dirt out?.I do have a good pump available if you need one on the plus side the pimp just unclips from the bottom of the tak once you have removed the lid. Good luck

Thanks for the advise. :thumb2
I dont want to risk undoing the top of the tank with out some spares to hand, I cant afford my car to stop working for one day...
Have you got a half decent lid i could have as a spare? im sure some new bolts shouldnt be hard to get.
How much do you want for the pump? :)

[Soggydog]

Thanks to CNC for the prompt delivery, great condition and excellent packaging of the spares I bought over the last couple of weeks. Great guy to deal with!

[makeitfit]

Top job mate, the starter turned up this afternoon:D Closely followed by the frantic job of changing my old one before my fingers froze to the bloody spanners:eek:
Job done now and bingo it works again:thumbs
Now I can park at all my favourite dogging sites without the engine running:lol

[zippy656]

i didnt know you had a dog mate.

[sidsid06]

Top job mate, the starter turned up this afternoon:D Closely followed by the frantic job of changing my old one before my fingers froze to the bloody spanners:eek:
Job done now and bingo it works again:thumbs
Now I can park at all my favourite dogging sites without the engine running:lol best to keep the engine running and heater on stops the windows steaming up :D

[Muckypup]

Thanks for the advise. :thumb2
I dont want to risk undoing the top of the tank with out some spares to hand, I cant afford my car to stop working for one day...
Have you got a half decent lid i could have as a spare? im sure some new bolts shouldnt be hard to get.
How much do you want for the pump? :)

Think you must have missed this reply CNC, how much for the fuel pump? :thumbs

[cncfabs]

Think you must have missed this reply CNC, how much for the fuel pump? :thumbs
Sorry. Price for the pump £40 inc delivery will have to check the condition of the lid.

[Spook]

Hi cnc,

do you still have a starter for 2.7D? if so how much, read that you can't garantee but still interested

cheers spook

[cncfabs]

Hi cnc,

do you still have a starter for 2.7D? if so how much, read that you can't garantee but still interested

cheers spook
Hello
Yes still have one £30 inc delivery via dhl

[Muckypup]

Sorry. Price for the pump £40 inc delivery will have to check the condition of the lid.

Thanks! Let me know on the lid as I might as well order them together if its in half decent nick. :thumb2

[cncfabs]

Thanks! Let me know on the lid as I might as well order them together if its in half decent nick. :thumb2
Lid is rusty but re useable will include it with pump

[Muckypup]

Lid is rusty but re useable will include it with pump

Excellent! Have you a Paypal account? :)

[TimGSXR]

Hi I'm after a drivers side seat for swb and a powersteering pump, have you got any available?

Thanks

Tim

[cncfabs]

Hi I'm after a drivers side seat for swb and a powersteering pump, have you got any available?

Thanks

Tim
Hello
Yes have both parts will need pic of the pump because there are a few different types i think the only delivery option on a seat would be pallet delivery unless you know a courier that would take it

[TimGSXR]

Hmmm guessing thats gonna cost a bit. What colour/condition/year is the seat in? Any pics? What you want for it and I'll see if I can a courier?

[cncfabs]

Hmmm guessing thats gonna cost a bit. What colour/condition/year is the seat in? Any pics? What you want for it and I'll see if I can a courier?
Sorry for the delay here are the pics second one shows 1/2" stiching come away just needs couple of stitches otherwise very good
http://i137.photobucket.com/albums/q204/stephenhudson/DSCF0031.jpghttp://i137.photobucket.com/albums/q204/stephenhudson/DSCF0032.jpg

[kirkyoke]

hi, do you still have the blue bonnet mate?
thanks

[bobbee]

hi mate. is the wiper stalk the same as on a mistral? on the left of column. and have you got the pair of glowplug regulators that sit by the battery on offside under the wing? how much for both bits? please pm it if you have them with price

[cncfabs]

hi, do you still have the blue bonnet mate?
thanks
Hello
Yes have the blue bonnet but it would need collecting

[redthing]

Hi, I'm after an off side headlight for my Terrano 2 [1998 round one ] if you have one please?

[jims-terrano]

A very small ask:o

The bolt that clamps the dip stick tube to side of block.

Thanks
Jim

[cncfabs]

Hi, I'm after an off side headlight for my Terrano 2 [1998 round one ] if you have one please?
Sorry mine are all early square headlight

[redthing]

Sorry mine are all early square headlight

no problem

[cncfabs]

A very small ask:o

The bolt that clamps the dip stick tube to side of block.

Thanks
Jim
Isnt it just a standard bolt

[jims-terrano]

Isnt it just a standard bolt

Aint got a clue until I get to it. Normally Nissan use some silly fine thread of some description.

Jim

[SteveN]

Hi have you any drivers door electric window mechanisms, I need the whole thing really.

cheers
Steve

[zippy656]

if not look on ebay.

wingmirrorwoman is who i got mine from

[makeitfit]

Have you got a SWB prop shaft please? I appear to have er bent mine a bit:augie
Ruddy thing's trying to get inside with me :eek:
Also drivers side half shaft and CV thingy :cool:
How much for a steering box n pump?

[cncfabs]

Hi have you any drivers door electric window mechanisms, I need the whole thing really.

cheers
Steve
Yes have drivers door regulator complete £35 inc delivery

[cncfabs]

Have you got a SWB prop shaft please? I appear to have er bent mine a bit:augie
Ruddy thing's trying to get inside with me :eek:
Also drivers side half shaft and CV thingy :cool:
How much for a steering box n pump?
Have the prop shaft and steering box there are a few different pumps so would need a pic of yours

[SteveN]

Yes have drivers door regulator complete £35 inc delivery

Great can you send me your paypal details please

tradfun4you@aol.com

cheers
Steve

[SteveN]

Yes have drivers door regulator complete £35 inc delivery

Great can you send me your paypal details please

tradfun4you@aol.com

cheers
Steve

done

[makeitfit]

How much for the prop please?
Cheers Pete

[cncfabs]

How much for the prop please?
Cheers Pete
Rear prop swb £35 inc delivery

[Dave Retired]

Bit late - just come on site after a long break - work taken up too much time so sorry missed this offer.

Have you by any chance got for my Ford Maverick 2.7 TD LWB 5 Door -1997 -

1. Front Bumps stops for offside and nearside.

2. Tow Hitch

3. Roof Bars

Thanks for any info.

[zippy656]

hi, might beable to help with a tow bar... mates got a T2 SWB, but i think thay are the same..
hell be taking it off soon, make an offer for it ill pass it on...via PM

Zippy

[cncfabs]

Bit late - just come on site after a long break - work taken up too much time so sorry missed this offer.

Have you by any chance got for my Ford Maverick 2.7 TD LWB 5 Door -1997 -

1. Front Bumps stops for offside and nearside.

2. Tow Hitch

3. Roof Bars

Thanks for any info.
Have the factory fitted roof bars available £25 collected dont have towbar. The bump stops are usually very poor would sugest buying new parts

[zippy656]

that swb or lwb roof bars you got there ??


my mate wants some....

[cncfabs]

that swb or lwb roof bars you got there ??


my mate wants some....
lwb

[zippy656]

oh well..

[Rick1956]

Looking for storage box lid between front seats, with working catch. blue/grey colour

[colin310]

Hi do you have the part of the centre consul that sits at the bottom in front of the gear and 4wd sticks? It's the place you'd maybe store sunglasses or something like that. I'm looking for one in grey if you have one. Cheers Colin

[cncfabs]

Hi do you have the part of the centre consul that sits at the bottom in front of the gear and 4wd sticks? It's the place you'd maybe store sunglasses or something like that. I'm looking for one in grey if you have one. Cheers Colin
Hello
Yes have one of those in grey £12 inc delivery

[cncfabs]

Looking for storage box lid between front seats, with working catch. blue/grey colour
Sorry i dont have 1 with working catch have a couple with a broken catch though:doh

[briggie]

got a auto gearbox ?

[cncfabs]

got a auto gearbox ?
Im sorry to say i havent have read about you bad experience on ebay hope you get it resolved soon

[colin310]

Hello
Yes have one of those in grey £12 inc delivery
Hi many thanks for getting back to me. Could you please PM me with payment details?

Cheers Colin

[SteveN]

Hi, just to say part arrived today, many thanks

cheers
Steve

[Liam]

Hi
Do you have driver's side mirror for a 96 Terrano,including interior cover? Not heated or electric. Thanks

[cncfabs]

Hi
Do you have driver's side mirror for a 96 Terrano,including interior cover? Not heated or electric. Thanks
Sorry i dont have one of those

[CRS]

Hi have you any interior trim etc for 1994 2.7 Maverick ?

[cncfabs]

Hi have you any interior trim etc for 1994 2.7 Maverick ?
Hello
Yes have compete interior in good condition £50

[briggie]

hi , have you got a n/s rear bumper light unit complete with bulb holders etc , for a mistral ? its the one with indicators in the bumper ? kind regards , pete

[CRS]

Hi I am in need of interior (including seats and carpets) for Maverick 2.7 3 door 1994. Can you help ?

[colin310]

Hello
Yes have one of those in grey £12 inc delivery
Hi the consul arrived today. Many thanks.
regards
Colin

[cncfabs]

hi , have you got a n/s rear bumper light unit complete with bulb holders etc , for a mistral ? its the one with indicators in the bumper ? kind regards , pete
Sorry i sold all the ones i had

[cncfabs]

Hi I am in need of interior (including seats and carpets) for Maverick 2.7 3 door 1994. Can you help ?
Yes PM sent

[makeitfit]

Rear prop swb £35 inc delivery

Can you pm me the paypal email address thing please? Also have you got a l/h front indicater MK1 stylee, if so I'll have one too:thumbs

[felixthelogchopper]

I'm looking for a rear screen demister switch with a working bulb in it for a late 1996 Maverick 2.7 GLS, and a viscous fan coupling for the same if you have them.Also, do you have a decent steering wheel (airbag one, but I don't need the airbag unit itself)? Cheers!

[briggie]

got a windscreen for my mistral ? and are they easy to fit ?

[extreme-4x4]

6th & 7th seat hinges. and belts please ASAP

[cncfabs]

I'm looking for a rear screen demister switch with a working bulb in it for a late 1996 Maverick 2.7 GLS, and a viscous fan coupling for the same if you have them.Also, do you have a decent steering wheel (airbag one, but I don't need the airbag unit itself)? Cheers!
Have working de mister switch £5 inc delivery the viscous coupling is part of the water pump would advise buying a new one as they do seem to give trouble i dont have an airbay type steering wheel

[cncfabs]

got a windscreen for my mistral ? and are they easy to fit ?
Pretty sure the screen is stuck in would get it on the insurance as fitting is a specialised job

[felixthelogchopper]

Have working de mister switch £5 inc delivery the viscous coupling is part of the water pump would advise buying a new one as they do seem to give trouble i dont have an airbay type steering wheel

Cheers. How do I pay?

[cncfabs]

6th & 7th seat hinges. and belts please ASAP
Have the early type bolt in hinges. Have the seatbelts also do you need just the belts or the bits they clip into

[extreme-4x4]

hmm . i have a seat that matches the interior so just need hinges and belts . think i have the female bits of seatbelts , but just in case how much for the lot .
i need them before the weekend i got the kids then see

[briggie]

clivvy , i have a load cover from a 51 plate x trail sport dci , if it will fit , you can have it .

[cncfabs]

hmm . i have a seat that matches the interior so just need hinges and belts . think i have the female bits of seatbelts , but just in case how much for the lot .
i need them before the weekend i got the kids then see
Is the seat bolted in or clipped in

[extreme-4x4]

hinges are bolted to the floor but come into 2 with a red clip

[zippy656]

early ones done have the red clips, and seats cant be removed, but with red clips then they can be taken out..

[cncfabs]

hinges are bolted to the floor but come into 2 with a red clip
I have only the early type hinges ie bolted in not removable

[extreme-4x4]

if they line up they will do and the belts . how much and how quick im waiting to pay now :bow

[zippy656]

i think makeitfit has some hinges..
ask him.

i know he said i could have them but your need is greater than mine by the sounds of it.

[cncfabs]

if they line up they will do and the belts . how much and how quick im waiting to pay now :bow
Here is a pic of the hinges and the seat to see if its anything like yours
http://i137.photobucket.com/albums/q204/stephenhudson/Image0022.jpg
http://i137.photobucket.com/albums/q204/stephenhudson/Image0021.jpg

[extreme-4x4]

yep they will do the job for now . how much ? can you do the belts too ... need em quick

[Darwin]

can I have a spare wheel bracket please.

[cncfabs]

can I have a spare wheel bracket please.
Yes would £20 inc delivery (dhl) be ok

[Darwin]

Yes would £20 inc delivery (dhl) be ok


I might be able to collect , I live in Somerset -)

[cncfabs]

I might be able to collect , I live in Somerset -)
Ok That would be good £10 then

[Darwin]

Paid.

I also need an main interiour light cover for a 98 Terrano

[cncfabs]

Paid.

I also need an main interiour light cover for a 98 Terrano
Many thanks have light cover for 1995 dont know if its the same will include anyway

[cncfabs]

Paid.

I also need an main interiour light cover for a 98 Terrano
Also could you pm your address it isnt on file with paypal

[djbites]

Hi, have you a wiper motar assembly for a 94 2.7 teranno, I am in Glos

Cheers, D.J.

[cncfabs]

Hi, have you a wiper motar assembly for a 94 2.7 teranno, I am in Glos

Cheers, D.J.
Do you need the linkage as well as the motor have all the bits available

[makeitfit]

Have you got a pair of calipers with pistons that actually move:augie
If so how much and could you send them out tomorrow so I can fit them at the weekend? It's bankholiday etc:doh So maybe ordinary first class parcel post :bow

[cncfabs]

Have you got a pair of calipers with pistons that actually move:augie
If so how much and could you send them out tomorrow so I can fit them at the weekend? It's bankholiday etc:doh So maybe ordinary first class parcel post :bow
Hello
Have one off could post that 1st class tomorrow prob is they weigh 5 kg so postage would cost £11 can post a pair next week chepaer with dhl price for caliper £15.

[Trigsbroom]

Hi,
Have you got a Bosch Fuel pump for a 2.7TDi?

[cncfabs]

Hi,
Have you got a Bosch Fuel pump for a 2.7TDi?
Sorry i dont have one

[felixthelogchopper]

Hi mate. I need the interior light which sits above the rear seats please.

[peter277]

hi just bought a 05 terano with 17 '' wheels on looking for 5 locking wheel nuts and socket to remove ? how much? ta peter

[cncfabs]

Hi mate. I need the interior light which sits above the rear seats please.
Hello
Yes have on of those available £5 inc delivery

[cncfabs]

hi just bought a 05 terano with 17 '' wheels on looking for 5 locking wheel nuts and socket to remove ? how much? ta peter
Sorry i dont have any locking nuts

[G0WXJ]

I wonder if you have a drivers electric window mechanism? Mine is giving up the ghost?
T2 2.4 petrol 1994 model
Pete

[makeitfit]

Stephen you are indeed a star:D
Caliper arrived with postman pat on Sat morning, cheers buddy:cool:

[cncfabs]

I wonder if you have a drivers electric window mechanism? Mine is giving up the ghost?
T2 2.4 petrol 1994 model
Pete
PM sent

[cncfabs]

Stephen you are indeed a star:D
Caliper arrived with postman pat on Sat morning, cheers buddy:cool:

No problem royal mail do get i right sometimes then :thumb2

[felixthelogchopper]

Hello
Yes have on of those available £5 inc delivery

Excellent, I'll take it. I have a problem with the rear screen demister switch you sent in that it is a different part to the one fitted to my car, with a different wiring pin set up. The one I need is for a late 1996 ie round headlight Maverick. Shall I send it back?

[cncfabs]

Excellent, I'll take it. I have a problem with the rear screen demister switch you sent in that it is a different part to the one fitted to my car, with a different wiring pin set up. The one I need is for a late 1996 ie round headlight Maverick. Shall I send it back?
I dont have round headlight model will the switch fit if so i could send the plug that fits it and you could wire it in from that?

[Ryan2205]

Hello i am after rear wheel cover and rear parcel shelf in black for a torrano 2.7 TDI LWB 54 REG Thanks Rob.

[cncfabs]

Hello i am after rear wheel cover and rear parcel shelf in black for a torrano 2.7 TDI LWB 54 REG Thanks Rob.
Sorry i dont have those think someone on here made a parcel shelf as they are very rare

[felixthelogchopper]

I dont have round headlight model will the switch fit if so i could send the plug that fits it and you could wire it in from that?

The switch does fit the facia so as long as the wiring would be fairly simple, I'm willing to have a go :)

[whistlingbadger]

Any Chance of Rear N/S Brakelight cover? I Left some of mine in a hawthorn bush at the weekend !!!

[cncfabs]

Any Chance of Rear N/S Brakelight cover? I Left some of mine in a hawthorn bush at the weekend !!!
yes the one mounted in the body? have complete unit £15 inc 1st class delivery

[Nisstay]

i have phone number of bloke breaking a 98 extreme ... all parts available ... engine only starts on easy start so he tells me .he is in Norwich ... tel:07917165622 his name is George Wright

[Bibio]

Im looking for a crankshaft pulley , and the oil pipe that fits onto the rear of the alternator , It goes into a metal pipe that goes infront of the bulkhead then into the brake servo.

John

[dinky]

Steven have you got pipes for air con.

[felixthelogchopper]

The switch does fit the facia so as long as the wiring would be fairly simple, I'm willing to have a go :)

Hi mate, you haven't got back to me about this? Still want that interior light so happy for you to pop the wiring plug in with that. :)

[cncfabs]

Steven have you got pipes for air con.
Sorry i dont have one with a/c

[briggie]

Sorry i dont have one with a/c

got a engine ? :augie:lol:lol

[cncfabs]

Hi mate, you haven't got back to me about this? Still want that interior light so happy for you to pop the wiring plug in with that. :)
Have the parts ready to send

[cncfabs]

got a engine ? :augie:lol:lol
Did have one actually but as thay are a real pain to remove i sold it for parts still have good cylinder head and turbo etc if that turns out to be the problem

[felixthelogchopper]

Have the parts ready to send

Cool, will sort out the Paypal. Sorry for delay, just wasn't sure what the situation was. :thumb2

[felixthelogchopper]

Money sent mate. Just occurred to me, when I said the rear seats I meant the second row of seats, not 6&7. Still getting used to having 3 rows of seats :doh

[cncfabs]

Money sent mate. Just occurred to me, when I said the rear seats I meant the second row of seats, not 6&7. Still getting used to having 3 rows of seats :doh
Is this the right one
http://i137.photobucket.com/albums/q204/stephenhudson/Image0040.jpg

[felixthelogchopper]

Looks good to me. Cheers for taking the effort to photograph it to check. :thumb2

[cncfabs]

Looks good to me. Cheers for taking the effort to photograph it to check. :thumb2
No problem will be in the post tomorow

[felixthelogchopper]

No problem will be in the post tomorow

Cheers. Much appreciated.

[rob.twigg]

hello have terrano 11 2003 looking for better seats in good condition maybe some other interior parts,do you have these how much,cheers rob.

[rob.twigg]

looking for some good front and rear seats for 03 terrano any chance rob.,

[cncfabs]

looking for some good front and rear seats for 03 terrano any chance rob.,
Sorry i dont have a good interior at the moment

[(RIP) PLANK]

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers

[cncfabs]

I know you have sort of answered this, but i'm lookiong for the seats and belts and bits and pieces to add rear seats to a 2003 swb commercial. Cheers
May have the belts are they like the rears in swb or the lwb type

[dave36]

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?

[cncfabs]

grey moulding over rear view mirror, containing roof open switch and 2 map light switches
mine well smashed up during gearbox repair
any chance?
Yes i did get your pm found one just got to remember where i put it will check tomorrow

[MontysMaverick]

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty

[cncfabs]

cnc, Do you happen to have 1x torsion bar top domed spacer, this is the domed shaped part that fits into the cup where the bolt goes through and the 2 nuts wind down onto this domed shaped part, Sorry if this sounds gobbledegook but its difficult to describe. Kind Regards Monty
Will check tomorrow should have but not sure what the part is until i look

[MontysMaverick]

Will check tomorrow should have but not sure what the part is until i look thanks matey if you do have 1, pm me please and we can arrange payment and postage etc, it looks about 1.5 inches round and is in the cup after you take the 2nuts off the top of the torsion bar mechanism near the gearbox end, Hope this helps

[DingDong]

I would like the walnut centre console trims if they are available