Breaking Terrano 2 and Mavericks

[cncfabs]

Red preferably for the door. How much and where are you exactly?

Thanks, TC

Yes have red in burnham on sea junction 22 m5

[TMC]

Yes have red in burnham on sea junction 22 m5

Could you post a pic when you get a chance, and pic of the window regulator

Also price on each thanks

[glanrichbex]

passengers side air vent assembly in black as my daughter prodded it and lost some of the slats.

[TMC]

I also need one of the above! :)

[pinkprincess]

Hiya, I need some panels as my Terrano is falling apart :( inner and outer sills for both sides for a 2000 SWB. Would you have any of these and are you able to ship (to Basingstoke)? Cheers!

[stinka]

Make your own from box section, you won't get used Terrano sills as there all rotten as fook :D

[cncfabs]

Hiya, I need some panels as my Terrano is falling apart :( inner and outer sills for both sides for a 2000 SWB. Would you have any of these and are you able to ship (to Basingstoke)? Cheers!

Not sure if i have any at moment tbh labour to cut them off would be prohibitive would be easier to get some fabricated not sure about using box section though would use some 2mm for inner and 1.2 for outer if i was doing it let me know how you get on

[glen]

Need back light bumper light fitting complete new style near side pass, transit just ran in to the back, not a lot of damage poor transit.

Glen

[cncfabs]

Need back light bumper light fitting complete new style near side pass, transit just ran in to the back, not a lot of damage poor transit.

Glen
Sorry sold the ones i had

[Paul]

Have you by any chance got a set of bushes for the front wiper mechanism? it's a 2002 but think (hope) they are the same.

[cncfabs]

Have you by any chance got a set of bushes for the front wiper mechanism? it's a 2002 but think (hope) they are the same.

Yes have some will find tomorrow

[ste68blue]

Hi, by any chance do you have a swb near side window winder motor and mechanism?

[solarman216]

Looking for a crank position sensor for a TDi timing case type, do you have one, but I am guessing probably not, Rick

[Paul]

Yes have some will find tomorrow
Thanks..:thumb2

[Paul]

Yes have some will find tomorrow
Have you had time to have a look yet.

[desgt6]

Hi, do you have a drivers Seat or just the Backrest ? for my 2004 2.7 TD LWB Terrano.

Thanks
Des

[cncfabs]

Have you had time to have a look yet.

Thought i had some off but can't find them do have a complete linkage if your interested

[cncfabs]

Hi, do you have a drivers Seat or just the Backrest ? for my 2004 2.7 TD LWB Terrano.

Thanks
Des

Yes Will post pic later

[Paul]

Thought i had some off but can't find them do have a complete linkage if your interested
Yes that will be easter then fitting bushes.. :thumb2 can you give us a price please.:D

[cncfabs]

Yes Will post pic later

http://i137.photobucket.com/albums/q204/stephenhudson/TERRANO%20MK4%202002/DSCF3192.jpg

[Paul]

Yes that will be easter then fitting bushes.. :thumb2 can you give us a price please.:D
My account here is playing up, did you get my pm for your Paypal address so we can pay you.
Ta Paul.

[R1cho]

would you happen to have a clutch cylinder cap and expansion tank cap?

[cncfabs]

would you happen to have a clutch cylinder cap and expansion tank cap?

Yes will get them off tomorrow

[R1cho]

Yes will get them off tomorrow

can u pm me how much and email for paypal cheers

[Paul]

cncfabs thanks, it came today..:thumb2

[BongoBerry]

looking for an exhaust manifold for a 2.4 petrol .... ?

[solarman216]

I might have one it will be cracked but not blowing, but not cheap £50.00 plus post & packing, Rick

[BongoBerry]

thanks Rick - but that won't be an improvement on what I have now ... cracked and not blowing ...

[solarman216]

thanks Rick - but that won't be an improvement on what I have now ... cracked and not blowing ...

so what do you want? not cracked and not blowing, very rare, please do not worry about it, if it is not blowing then there is no gain, and to find one that is not cracked is like rocking horse poo, Rick

[Kishada]

Asked a few pages back and never got a reply...

2001 Terrano II 2.7TDi

- Wiper linkage (it's the nearside pivot for the arm in particular that has a collapsed bush/collar).
- O/S/F Indicator
- Pair of front suspension arm bumpstops
- Pair of rear bumpstops
- The bracket on the inlet manifold where all the wiring connectors reside
- A rear door handle with a key barrel (and i'd need the key) where mine is blanked (I think this was present on an earlier model)
Please let me know prices and availability

Cheers

[cncfabs]

looking for an exhaust manifold for a 2.4 petrol .... ?

Will check what i have tomorrow have had good ones in past

[cncfabs]

Asked a few pages back and never got a reply...

2001 Terrano II 2.7TDi

- Wiper linkage (it's the nearside pivot for the arm in particular that has a collapsed bush/collar).
- O/S/F Indicator
- Pair of front suspension arm bumpstops
- Pair of rear bumpstops
- The bracket on the inlet manifold where all the wiring connectors reside
- A rear door handle with a key barrel (and i'd need the key) where mine is blanked (I think this was present on an earlier model)
Please let me know prices and availability

Cheers

Sorry must have missed that will check what i have tomorrow.I def dont have the indicator im asked for those all the time and i beleive they are available from main dealer around £30 will check rest tomorrow

[melissachels]

Got brake servo on monday cheers:thumb2

[73anth]

i have a 2004 2.7 diesel terrano, the accelerator sensor is playing up, are they interchangable?

do you have one?

[stinka]

i have a 2004 2.7 diesel terrano, the accelerator sensor is playing up, are they interchangable?

do you have one?

I do mate

[stinka]

http://www.ebay.co.uk/itm/110943726873?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

[cncfabs]

looking for an exhaust manifold for a 2.4 petrol .... ?

Yes have one thats not cracked ...did someone say rocking horse poo:lol

[Kishada]

Asked a few pages back and never got a reply...

2001 Terrano II 2.7TDi

- Wiper linkage (it's the nearside pivot for the arm in particular that has a collapsed bush/collar).
- O/S/F Indicator
- Pair of front suspension arm bumpstops
- Pair of rear bumpstops
- The bracket on the inlet manifold where all the wiring connectors reside
- A rear door handle with a key barrel (and i'd need the key) where mine is blanked (I think this was present on an earlier model)
Please let me know prices and availability

Cheers

No probs on the indicator, local dealer is £27+vat but offering 20% off so basically vat free.

Any joy on the other bits?

[cncfabs]

No probs on the indicator, local dealer is £27+vat but offering 20% off so basically vat free.

Any joy on the other bits?

Yes struggling with rain a bit:( but have all the bump stops should have good wiper mech havent took off yet have the handle but will need to get key cut as ive only got 1 key and thats coded not sure about the bracket as ive not got t2 thats complete:doh

[Kishada]

Yes struggling with rain a bit:( but have all the bump stops should have good wiper mech havent took off yet have the handle but will need to get key cut as ive only got 1 key and thats coded not sure about the bracket as ive not got t2 thats complete:doh

Great, please give me some indication of price, feel free to PM me if you wish.
As far as you can see would that rear door handle with barrel lock in it be a direct bolt in for the later model where it's blanked?
All i need to know is whether the bolt holes for mounting in to the door are the same, i'll be ok to get the internals working.
I'll ask arcascomp to post up a pic as i commented on his when i saw it on sunday and realised mine was missing!

Cheers

[arcascomp]

Will try and get a photo up today, shout if you want me to drop in so you can have a look at an early rear door handle/lock. No worries if you want to strip the rear door down to try it out first, as long as it all goes back again! :D

Are you in work either day this weekend?

[arcascomp]

'ere we go, the plate he's after holds all these cables neatly on top of the inlet manifold more or less.

[cncfabs]

'ere we go, the plate he's after holds all these cables neatly on top of the inlet manifold more or less.

Dont think whats the bit his is a 2001 tdi thats a td in your pic

[arcascomp]

Yep, correctly identified, mine is a TD, however is the flate plate that the connections are clipped onto different on a TDi?

[cncfabs]

Yep, correctly identified, mine is a TD, however is the flate plate that the connections are clipped onto different on a TDi?

Yes there is a big round multiplug in place of most of those square connectors where the fly by wire pump is connected to

[Kishada]

Yes there is a big round multiplug in place of most of those square connectors where the fly by wire pump is connected to

You're both right.
I need the equivalent plate for my 2001 TDi but have never seen one and assumed it'd be the same as the one in the pic, although you're right, mine has the big round multiplug!

2 more items for the list:

Genuine Ariel
Button for the light switch on the roof between the 2 front seats.

[BongoBerry]

Need the single wiper (yet dual front and back pump) for a 98 2.4l Terrano..

Have looked on Ebay - there are two types available,, getting a tad confused...

[cncfabs]

Need the single wiper (yet dual front and back pump) for a 98 2.4l Terrano..

Have looked on Ebay - there are two types available,, getting a tad confused...

Yep Im confused is it the pump or the wiper you need

[BongoBerry]

Yep Im confused is it the pump or the wiper you need

Pump... wipers work fine

[BongoBerry]

Pump... wipers work fine

now sorted

although washer bottle is leaking a little water where the two join!!

[BIG-JOHN]

Hi there do you have a complete clutch pedal assembly to fit a 2002 tdi terrano, and also front drivers and passengers door speakers as mine are knackered, price please incl postage.

Cheers

John.....

[ste68blue]

I am after either an A bar or a bull bar for the terrano if you have any?

[cncfabs]

I am after either an A bar or a bull bar for the terrano if you have any?

No sorry havent at moment

[Terranical]

Hi Stephen. I'm after the proverbial hens teeth - a n/s foglight for my '94 TD, also a pair of speakers, they're for the back, but as far as I remember the same speakers are also in the front.
Cheers
Bruce (Terranical)

[cncfabs]

Hi Stephen. I'm after the proverbial hens teeth - a n/s foglight for my '94 TD, also a pair of speakers, they're for the back, but as far as I remember the same speakers are also in the front.
Cheers
Bruce (Terranical)

Will check for the foglight.Have the speakers

[Terranical]

Will check for the foglight.Have the speakers
Ta very much!

[96terrano]

Hi Stephen. I'm after the proverbial hens teeth - a n/s foglight for my '94 TD, also a pair of speakers, they're for the back, but as far as I remember the same speakers are also in the front.
Cheers
Bruce (Terranical)

yes, go for maverick speakers!:thumb2 as i said, Nissan ones are sh1t :rolleyes:

[Terranical]

Will contact you on my return from Spain, sometime this weekend.
Cheers
Terranical (Bruce)

[ste68blue]

i have a mate after an off side front wing for a 1998 if anyone has one?

Cheers
stephen

[BongoBerry]

after internal light assembly for SWB terrano 98 model..

cheers

[BongoBerry]

just to clarify ... the one which comes on when you open the door ...

[gerald of airedale]

Hi,
I have a bit of a shopping list of bits and bobs for my 2000, T2 2.7Tdi. Do you have:

1. Wing mirror glass(LH)
2. Cup holder(Mine won't shut)
3. Adjustable dashboard vents left, right and centre
4. Wheel hub centre(Cup type)

Thanks
Gerald

[JimE]

Any got any spare head rests? Got one missing from my Maverick so can't fit my dog guard as it bolts to the headrests. They are just plain grey material.
Cheers
Jim

[cncfabs]

Any got any spare head rests? Got one missing from my Maverick so can't fit my dog guard as it bolts to the headrests. They are just plain grey material.
Cheers
Jim

Can you post a pic as there are couple of different ones have both types

[cncfabs]

Hi,
I have a bit of a shopping list of bits and bobs for my 2000, T2 2.7Tdi. Do you have:

1. Wing mirror glass(LH)
2. Cup holder(Mine won't shut)
3. Adjustable dashboard vents left, right and centre
4. Wheel hub centre(Cup type)

Thanks
Gerald

Are thees the right bits i dont have centre vents or the glass
http://i137.photobucket.com/albums/q204/stephenhudson/SAM_0001_zps63f85d40.jpg

[cncfabs]

after internal light assembly for SWB terrano 98 model..

cheers

will check

[kitchenman]

Hi, I need a new rear screen heater switch, the original fell apart and shot the button between the seats, I found the bits I think but 1 spring is missing and now the screen mists up of course, Mav details in my sig
Do you have one? or the whole set, most of the indicator lights do not work but switches do
dave

[bonesXU1]

Hello there, I am looking for 2 of the strange looking bumper slide mount things for the front bumper ('T' shape) that screw to the front wings. I'm sure you know what I mean . Do you have any available? and a couple of wheel nuts too?

[cncfabs]

Hello there, I am looking for 2 of the strange looking bumper slide mount things for the front bumper ('T' shape) that screw to the front wings. I'm sure you know what I mean . Do you have any available? and a couple of wheel nuts too?

Yes have those can you post pic of type of nut required as there are a few types

[Kamsin]

This thread has been here since 2009, there cant be much of the poor old girl left by now........Can there? :confused:

[cncfabs]

This thread has been here since 2009, there cant be much of the poor old girl left by now........Can there? :confused:

Yep though not the same one prob had 15 since the thread was started:thumbs

[Kamsin]

LOL, that makes more sense

[Kamsin]

You not come across a set of Magnet millie speedo clocks have you..... Some that work..LOL

[cncfabs]

You not come across a set of Magnet millie speedo clocks have you..... Some that work..LOL

If that's the type fitted to 2002 ish model then no did have one but sold it sorry

[geoffdown]

If that's the type fitted to 2002 ish model then no did have one but sold it sorry
think that is the change over to diff electric dash kasmins is same as mine 1999 to 2002

[Kamsin]

Ye, thats the one. Trying to find some before i send mine to be fixed. I dont know if there is a way of putting the later set in and swapping the wires around.

[bonesXU1]

Yes have those can you post pic of type of nut required as there are a few types
Two or three of the dome headed nuts if possible but if not the open type like the other shown in the picture.
http://i203.photobucket.com/albums/aa36/bones73_2007/ter016.jpg
And two of these please.
http://i203.photobucket.com/albums/aa36/bones73_2007/ter009.jpg

[Paul h]

Have you got the gaitor that goes round the gear levers on a manual terrano

[cncfabs]

Have you got the gaitor that goes round the gear levers on a manual terrano

Is that leather or rubber and also is it the one that you see in the car or the one under that

[jims-terrano]

Hi CNCFABS, just letting you know my spares came today.

Many Thanks, shame we can't give you Feedback on here like Ebay:thumbs:thumbs

[cncfabs]

Hi CNCFABS, just letting you know my spares came today.

Many Thanks, shame we can't give you Feedback on here like Ebay:thumbs:thumbs

You just did thanks:thumbs

[kitchenman]

I would like to add to that, CNCFABS got me a new screen heater switch the next day:clap:clap:clap:clap:clap:clap

[kwondo]

hi Stephen, would you happen to have a pair of rear rubber bump stops. the ones like a figure 8 for a 98 lwb maverick

also the little coat hanger clips that fit on the interior roof handles


regards russell
happy new year
__________________

[stinka]

Hi cncfabs please check pm's

Ta

[Terranical]

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts
Hi Stephen, looking for a nearside front sidestep end piece (black plastic, held by 3 self tappers), exactly the same style as the blue 5 door in your picture, any possibility?
Cheers Terranical (Bruce)

[clivvy]

hi!

i think you said you had the coolant temp sensor, this is the one i need:

http://i176.photobucket.com/albums/w163/clivjoo/IMG_20130105_161211.jpg

its a round-ish connector and its from a 97 Maverick. How much?

[MudLifeCrisis]

Think coolant sensor is the one at the bottom

[stinka]

Big one is ecu small one is gauge

They are £15 from eBay

[stinka]

http://bit.ly/Zssh3R

[clivvy]

http://bit.ly/Zssh3R

ah, cheers chappy!:thumbs

[jims-terrano]

http://bit.ly/Zssh3R


Hey Stinka, why is it when you post a URL to another web site such as this to Ebay it takes you through "bit.ly/Zssh3R" rather than straight to ebay?

[stinka]

Hey Stinka, why is it when you post a URL to another web site such as this to Ebay it takes you through "bit.ly/Zssh3R" rather than straight to ebay?

Because I'm using the iPhone eBay app and it has an option to share the URL of the advert, that's the type of URL it gives and that what I copy and paste

Only ever browse on my iPhone now, never use a pc anymore lol

[jims-terrano]

Because I'm using the iPhone eBay app and it has an option to share the URL of the advert, that's the type of URL it gives and that what I copy and paste

Only ever browse on my iPhone now, never use a pc anymore lol

Ahh got it now.

[redthing]

Hi, I'm looking for a floor strip that goes across the rear door entry on a terrano. I think they are all the same, [5 fixing points] mine's off a Terrano SWB 2004. many thanks.....

[Terranical]

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts
Any joy on the passenger side front end side step moulding? (Same as your picture)

[cncfabs]

Any joy on the passenger side front end side step moulding? (Same as your picture)

Did have couple will need to look for them

[cncfabs]

Hi, I'm looking for a floor strip that goes across the rear door entry on a terrano. I think they are all the same, [5 fixing points] mine's off a Terrano SWB 2004. many thanks.....

Will check should have

[redthing]

Will check should have

Cheers

[bobhope]

hi do you have a temperature sensor for above model . its the small one on the thermostat housing (spade connector ). not the management one cheers mate dave

[redthing]

Any luck with locating the floor strip?

[redthing]

Cheers

got one elsewhere thanks.

[cncfabs]

got one elsewhere thanks.

Ok no problem did find one but not great condition

[Terranical]

Did have couple will need to look for them
Re the sidestep endcap (pass. side, front) if you do come across one I shall be back in the UK next Friday, so will be able to pick it up anytime after that.
Cheers
Bruce (Terranical)

[cncfabs]

Re the sidestep endcap (pass. side, front) if you do come across one I shall be back in the UK next Friday, so will be able to pick it up anytime after that.
Cheers
Bruce (Terranical)

Havent found yet did look will check again tomorrow

[Terranical]

Havent found yet did look will check again tomorrow
Cheers bud.

[Toxic_lolly]

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts
Hi, I am looking for a Diesel fuel tank - original part no. 172020F610 for my 51 plate Terrano
can you help ?

[Banshee]

Hi, I am looking for a Diesel fuel tank - original part no. 172020F610 for my 51 plate Terrano
can you help ?

Where about are you in the Midlands mate?

[TimRoland]

Im after the drivers side adjustable air vent? Please. Mines an 04 2.7.

Thanks

[cncfabs]

Im after the drivers side adjustable air vent? Please. Mines an 04 2.7.

Thanks

Yes have one in black only thing is the rubber seal on the flap has been nibbled by mice so air wont full shut off otherwise its fine:lol

[96terrano]

Yes have one in black only thing is the rubber seal on the flap has been nibbled by mice so air wont full shut off otherwise its fine:lol

how the hell did they get on their :eek:

[cncfabs]

how the hell did they get on their :eek:

Dunno they get in anywhere and eat anything in the winter there favorite food is the insulation from electrical wiring:doh

[96terrano]

there favorite food is the insulation from electrical wiring:doh

:lol

[gerald of airedale]

Ay up lads

I am looking for a drivers window relay switch. The unit is a small black box, one end has an 8 spade terminal that connects to the door window switch and the windows regulator motor

Hopefully you have one available

I eagerly await your response

Thanks

Graeme

[96terrano]

Ay up lads

I am looking for a drivers window relay switch. The unit is a small black box, one end has an 8 spade terminal that connects to the door window switch and the windows regulator motor

Hopefully you have one available

I eagerly await your response

Thanks

Graeme

As long as the mice havnt got to it :lol

[cncfabs]

Cheers bud.

Found it do you want it posted

[ToshTerrano]

You dont happen to have a Radio Fascia with the Hazard switch above the radio and not built into it.

[cncfabs]

You dont happen to have a Radio Fascia with the Hazard switch above the radio and not built into it.

No sorry that's not a standard part

[elty001]

i'm in need of the n/s heater vent thats fits next to the glove box,nearest the door.
also need the drivers seat belt plug as as mine has dropped to bits and is held together with tape.
mines a 2000 model but the parts look the same as my old 1997.

[TimRoland]

Yes have one in black only thing is the rubber seal on the flap has been nibbled by mice so air wont full shut off otherwise its fine:lol

DOH! Never mind thanks anyway

[bonesXU1]

Do you have a heater resister for a 2001 Terrano as my fan isn't working on no2 speed?

[cncfabs]

Do you have a heater resister for a 2001 Terrano as my fan isn't working on no2 speed?

No sorry

[bonesXU1]

Any idea of any other Nissan makes that would fit the Terrano 2 ?

[bonesXU1]

Any late spec front bumpers? the type with vertical bits down the centre of the bumper.

[cncfabs]

Any late spec front bumpers? the type with vertical bits down the centre of the bumper.

No sorry i dont have any of those

[bonesXU1]

ok ,thanks.

[Kishada]

Looking for a tailgate latch box and central locking motor with the added requirement that it must have all the rods attached!
It would need to be from an older version than my 2001, the style that has the 'door button' that pops up and the cable for the interior handle eg:just like this (http://www.ebay.co.uk/itm/221175784050?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)

Please let me know if you can help.

This is to go with the rear door handle with key that you sold me all those months ago :lol:doh

[96terrano]

No sorry

I'd of thought they were all the same?:nenau

[96terrano]

A friend of a friend is needing the electric window mechanisms from the passenger front and rear doors, also the control relay for the windows, do you have any ? It's for a mistral but will probably be the same as the maverick?

[kwondo]

hi cncfabs after some bits if you have them please:
1, a pair of "bound bumpers" bump stops from the front lower wish bone suspension page 29 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf
2. Front nearside "baffle plate" from page 13 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf page
3. rear demister switch the one from the centre console next to the cup holder
4. the little coat hooks of the roof handles

cheers Russell

[Kishada]

Looking for a tailgate latch box and central locking motor with the added requirement that it must have all the rods attached!
It would need to be from an older version than my 2001, the style that has the 'door button' that pops up and the cable for the interior handle eg:just like this (http://www.ebay.co.uk/itm/221175784050?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)

Please let me know if you can help.

This is to go with the rear door handle with key that you sold me all those months ago :lol:doh

Bump

[cncfabs]

Bump

Sorry will check make sure all rods are intact

[cncfabs]

hi cncfabs after some bits if you have them please:
1, a pair of "bound bumpers" bump stops from the front lower wish bone suspension page 29 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf
2. Front nearside "baffle plate" from page 13 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf page
3. rear demister switch the one from the centre console next to the cup holder
4. the little coat hooks of the roof handles

cheers Russell

Will check not sure i have 2 bump stops but other bits shouldnt be a problem

[cncfabs]

A friend of a friend is needing the electric window mechanisms from the passenger front and rear doors, also the control relay for the windows, do you have any ? It's for a mistral but will probably be the same as the maverick?

Def have rear and control box need to check if i have front

[96terrano]

Def have rear and control box need to check if i have front

No problem:thumb2

[kwondo]

Will check not sure i have 2 bump stops but other bits shouldnt be a problem

ok thanks, just to confirm front bump stops,cheers

[96terrano]

Hi mate, got a massege back from this woman saying:

Front passenger and drivers rear motor and regulator and relay

[Paul h]

I'm after two rear arches cutting out of a Swb terrano so if anyone can help.if I can get some cut of a breaker my mate would be able to splice them in on mine plus tge gear stick gaitor wich goes round oth gear sticks cheers

[Lincs Mav]

Do you happen to have a spare wheel carrier for the rear door?

Cheers Gav

[cncfabs]

Do you happen to have a spare wheel carrier for the rear door?

Cheers Gav

PM sent

[cncfabs]

I'm after two rear arches cutting out of a Swb terrano so if anyone can help.if I can get some cut of a breaker my mate would be able to splice them in on mine plus tge gear stick gaitor wich goes round oth gear sticks cheers

Have couple of swb terranos will need to check condition is it the outer skin thats required

[96terrano]

Hi mate, got a massege back from this woman saying:

Front passenger and drivers rear motor and regulator and relay

Any luck?

[cncfabs]

Any luck?

Will check tomorrow

[96terrano]

Will check tomorrow

Ok.

[Paul h]

Have couple of swb terranos will need to check condition is it the outer skin thats required

It is yes mate cheers

[kwondo]

hi cncfabs after some bits if you have them please:
1, a pair of "bound bumpers" bump stops from the front lower wish bone suspension page 29 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf
2. Front nearside "baffle plate" from page 13 of 40 http://bebrs.pie-dabas.net/Webs/Terrano/R20/fa.pdf page
3. rear demister switch the one from the centre console next to the cup holder
4. the little coat hooks of the roof handles

cheers Russell

hi cncfabs
any luck finding the bits for me, cheers

[96terrano]

hi mate, i need this hose That goes from the alternator to the engine block

http://www.nissan4x4ownersclub.com/forum/showpost.php?p=196810&postcount=1

[cncfabs]

hi cncfabs
any luck finding the bits for me, cheers

Going to get them tonight

[cncfabs]

hi mate, i need this hose That goes from the alternator to the engine block

http://www.nissan4x4ownersclub.com/forum/showpost.php?p=196810&postcount=1

Snipped it when i removed the alternator:doh

[96terrano]

Snipped it when i removed the alternator:doh

Fudge no probs, I done the same too :clap:doh

[dennisgraham]

hi do you have offside freewheeling hub?

[cncfabs]

hi do you have offside freewheeling hub?

Sorry sold them all at moment had big rush on when it started to snow:lol

[96terrano]

hi do you have offside freewheeling hub?

i do:thumb2

[redthing]

Hi, CNCFABS, do you have an auxiliary 12v power supply socket for a terrano SE ( fits in the rear of the storage box between the front seats) One of the retaining clips is broken on mine.
Cheers

[cncfabs]

Hi, CNCFABS, do you have an auxiliary 12v power supply socket for a terrano SE ( fits in the rear of the storage box between the front seats) One of the retaining clips is broken on mine.
Cheers

Cant remeber seeing one fitted there but have primera might be one in that

[redthing]

Cant remeber seeing one fitted there but have primera might be one in that

As long as it'll fit in a 40mm aperture it'll be fine ;)

[96terrano]

do you have the air vents for the side of the dash? mine are broken

[BongoBerry]

Hi

I am after the front bumper indicator (small rectangular shape) and the electrics which feed it (mine have disintegrated) (offside if it matters)

'98 2.4 Petrol terrano

Thanks

PS and while I am here ... the parking bulb for the same side which fits into the headlight :)

[cncfabs]

Hi

I am after the front bumper indicator (small rectangular shape) and the electrics which feed it (mine have disintegrated) (offside if it matters)

'98 2.4 Petrol terrano

Thanks

PS and while I am here ... the parking bulb for the same side which fits into the headlight :)

Doesnt yours have the newer type on 1998 the small rectangular ones are on the early square headlight model

[BongoBerry]

well you tell me :)

[cncfabs]

well you tell me :)

Have one but has hairline crack in lense doupt it will cause problem as doesnt appear to leak can send pic if required

[BongoBerry]

I need the electric loom behind it more than I need the lens...

[cncfabs]

I need the electric loom behind it more than I need the lens...

Oh i see its been cut:doh will check what else i have so you need the bulbholder with some cable?

[BongoBerry]

rotted through.... I need the connector that goes into the back of the bulb and as much wiring from that "backwards" so i can reconnect it back to the loom.

[cncfabs]

rotted through.... I need the connector that goes into the back of the bulb and as much wiring from that "backwards" so i can reconnect it back to the loom.

Found one pm sent

[melissachels]

do you have the square fogs & the wee square surronds for them from square headlight model, need them with no cracks or nowt as I got mot soon. cheers

[cncfabs]

do you have the square fogs & the wee square surronds for them from square headlight model, need them with no cracks or nowt as I got mot soon. cheers

No sorry like gold dust those.You can get aftermarket ones almost exact same size

[glanrichbex]

Hi,
I took the door switch out to fix it then lost it, do you have one ?

It may stop me leaving the lights on and flattening the battery :doh

cheers

[melissachels]

No sorry like gold dust those.You can get aftermarket ones almost exact same size

Ta much Anyho

[kwondo]

hi, do you have a pair of the rear suspension coil lower seat "rubbers" donaught shapped, cheers

[Tomas]

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts

I need an ignition switch & Keys to go in a 96 SWB Mav TDi, any chance?
If so How much?

Tomas

[cncfabs]

I need an ignition switch & Keys to go in a 96 SWB Mav TDi, any chance?
If so How much?

Tomas

Yes have one but i see youve been offered one on another thread for £10:doh

[Tomas]

I "put the word out" to find one!
Didn't know they are detachable!

Sorry to cause confusion. Is yours the same price?

[cncfabs]

I "put the word out" to find one!
Didn't know they are detachable!

Sorry to cause confusion. Is yours the same price?

If you only need the switch would buy new one other members have bought them under £30 i think quite common failure

[bloat]

Do you have any roof bars for the lwb terrano? If so how much delivered cheers

[cncfabs]

Do you have any roof bars for the lwb terrano? If so how much delivered cheers

Sorry sold the ones i had

[Lincolnshire guy]

The plastic clips near the back door that hold the load cover, both sides.

Rear half carpet LWB, no dog hairs please :doh

[Tomas]

Any Original Maverick Rubber Mats?
I would like a good Drivers mat?

[cncfabs]

Fresh stock
http://i137.photobucket.com/albums/q204/stephenhudson/2013-06-06202151_zpsb84a9b22.jpg

[bry]

I need a front n/s wheel hub to fit a 2001 terry se tdi. If ya have one?

[cncfabs]

I need a front n/s wheel hub to fit a 2001 terry se tdi. If ya have one?

Is that the part the wheel studs press into http://nissan4u.com/parts/terrano2/el_r20/2001_6/type_125/axle_suspension_and_steering/front_axle_and_front_suspension/illustration_2/

Item 2?

[fridgman]

Hi, I am looking for a pair of front caliper 'sliders' for a 1997 2.7tdI maverick please.

Nick

desperately crossing my fingers!

[(RIP) rustygates]

Hi stephen, i'm still looking for a burgundy n/side door mirror, if you have one,most grateful

rustygates

[cncfabs]

Hi stephen, i'm still looking for a burgundy n/side door mirror, if you have one,most grateful

rustygates

Just got that one with broken glass at moment

[(RIP) rustygates]

That will do,i .can replace glass i'm sure, p m with price etc,or i will going down to brent knoll soon.

rustygates.

[johners]

HI Stephen,

Have you got a N/S black mirror please??

[tsteve4x4]

Hi. Would you have a pair or at least the drivers front wing for an R reg Maverick? Also would you be able to post to Kent?
Cheers, Steve.

[thesilkster]

Hi I need a drivers side mirror black plastic please many thanks

[bry]

Is that the part the wheel studs press into http://nissan4u.com/parts/terrano2/el_r20/2001_6/type_125/axle_suspension_and_steering/front_axle_and_front_suspension/illustration_2/

Item 2?
Hi mate,for some reason i lost this thread.But yeah item 2.Thats the one where the flexi brake pipe is secured?

[cncfabs]

Hi mate,for some reason i lost this thread.But yeah item 2.Thats the one where the flexi brake pipe is secured?

No the brake pipe isnt secured to the hub

[cncfabs]

Hi I need a drivers side mirror black plastic please many thanks

Pm sent

[bry]

No the brake pipe isnt secured to the hub
My mistake.:confused:

[Kev69]

CNCFABS, PM Sent.

[judd750]

hi, need a rear brake adjuster for 1999 lwb tdi
(threaded bar with a fork in it, and knurled nut on)

[96terrano]

Jeeze this is a big thread:eek:

Anyhoo, do you have the pannel that fits under the scuttling on the passengers side? Where the blower sucks in air, mine is rusty and now bent :augie

[cncfabs]

Jeeze this is a big thread:eek:

Anyhoo, do you have the pannel that fits under the scuttling on the passengers side? Where the blower sucks in air, mine is rusty and now bent :augie

Is that the square galvanised one

[96terrano]

Is that the square galvanised one

yes, i'll just get a pic

[96terrano]

the plate that covers that hole

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/969575_680957215265035_1103973667_n.jpg

[Terranosaurus]

Looking for a Front Near Side drive shaft and a SWB rear propshaft - do you have any?

[96terrano]

Looking for a Front Near Side drive shaft and a SWB rear propshaft - do you have any?

Think I've got a SWB prop if CNCfabs doesn't

[cncfabs]

Looking for a Front Near Side drive shaft and a SWB rear propshaft - do you have any?

Have you got measurement for the prop not sure if they are the same on all years

[msatchwell]

Looking for a front passenger electric window switch, can you help?
Martin.

[Terranosaurus]

Have you got measurement for the prop not sure if they are the same on all years

no not got the measurement - a mate took it to change the UJs but I never got it back.

According to the parts number all the diesel ones are the same - http://nissan4u.com/parts/info/373002X810/

[dave123]

have you got a rear driverside passenger electric window motor and mechanism for a 2000 terrano 2.7 tdi

[BongoBerry]

Looking for a window winder handle. (black)

[cncfabs]

Looking for a window winder handle. (black)

Quite rare those should have one will check

[Terranosaurus]

Looking for a Front Near Side drive shaft and a SWB rear propshaft - do you have any?


Any joy?

[RobN]

Looking for a parcel shelf, black fit 2004 LWB SVE. Also looking for Radio mount panel from a SE (standard din with the Hazard switch separate to the radio).

[cncfabs]

Looking for a parcel shelf, black fit 2004 LWB SVE. Also looking for Radio mount panel from a SE (standard din with the Hazard switch separate to the radio).

Thats 2 very rare items i dont have either sorry

[solarman216]

in the market for a couple of half decent front wings, Rick

[96terrano]

in the market for a couple of half decent front wings, Rick

I don't know why but a lot of the local Terranos up here have very good wings, strange

[cncfabs]

in the market for a couple of half decent front wings, Rick

Got wings its posting that the problem

[96terrano]

the plate that covers that hole

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/969575_680957215265035_1103973667_n.jpg

Any luck?

[cncfabs]

Any luck?

Sorry forgot will look tomorrow

[96terrano]

Sorry forgot will look tomorrow

Kewl:thumb2

[solarman216]

I don't know why but a lot of the local Terranos up here have very good wings, strange

you got a couple going then? Rick

[96terrano]

you got a couple going then? Rick

Not me personally but I'm trying to get another terrano for parts that have good wings

Think ill have a look in the local scrappys again to see if I can get some good wings

[melissachels]

oh ryan there was one down your way for £400 on gumtree

[96terrano]

oh ryan there was one down your way for £400 on gumtree

Too much just now

Need to start off cheap and work up

[RobN]

How about a tool kit? Have got jack and rod the rest is missing.

Rob

[solarman216]

would never use the jack that comes with, the T2, get yourself a trolly jack from Lidl or Aldi when they next have them, £20 much safer, Rick

[96terrano]

would never use the jack that comes with, the T2, get yourself a trolly jack from Lidl or Aldi when they next have them, £20 much safer, Rick

Yes, the jacks are Crap, more suited for the micra, I just keep mine in their for originality, never use it.

[Terranosaurus]

Looking for a Front Near Side drive shaft and a SWB rear propshaft - do you have any?

Any joy?

[cncfabs]

Any joy?

Yes do have both just short of time at moment to remove when do you need them by

[Terranosaurus]

Yes do have both just short of time at moment to remove when do you need them by

ASAP - car is stood waiting for them

[RobN]

Trolly Jack takes up a bit of room in the car.

Would still like a tool kit if anyone has one.

Rob

[RobN]

No probs, just got a wheel brace

[cncfabs]

New scrapper
http://i137.photobucket.com/albums/q204/stephenhudson/2013-09-20185428_zps7aa4dd89.jpg

[AD Ent]

Radio, Facia, and wires please. Whats the wings like?

[cncfabs]

Radio, Facia, and wires please. Whats the wings like?

Its still got the original radio so no fascia but am collecting another terrano tomorrow so that may have one in.The wings are good rust free in fact the whole car is rust free

[Paul]

Have you got a pair of wheel centre caps from it?

[Codders]

Hi there I'm after a front bumper and drivers side main light and indicator like the one in piccy above.. Mines a silver 2005 model , can a bumper like the plastic one be sprayed by a body shop to match ok?? Many thanks rob

[Sweety]

Hi there I'm after a front bumper and drivers side main light and indicator like the one in piccy above.. Mines a silver 2005 model , can a bumper like the plastic one be sprayed by a body shop to match ok?? Many thanks rob

Yes :thumb2

[Sweety]

Any rear bump stops ? need one not to bothered about the steel mounting as I can rebond the rubber back on:thumb2

[cncfabs]

Hi there I'm after a front bumper and drivers side main light and indicator like the one in piccy above.. Mines a silver 2005 model , can a bumper like the plastic one be sprayed by a body shop to match ok?? Many thanks rob

Sorry sold those

[cncfabs]

Any rear bump stops ? need one not to bothered about the steel mounting as I can rebond the rubber back on:thumb2

Just sold the ones off the 04 plate dont think ive got any left

[J66P]

just realized this is the guy I just bagged my air filter housing from on eblag, great service I may add

[Gaz-M]

Hi, RE facelift 04- how much for speedo/instrument cluster clear cover?

Also, drivers rear mudflap.

Need a front bumper same as that too, put my name on next one! :thumb2

[thecrazycabbage]

Any chance you may have a key/immu from a 96 2.7 terrano?

[cncfabs]

Any chance you may have a key/immu from a 96 2.7 terrano?

Should have but will need part numbers to be sure of correct parts

[Gaz-M]

Hi, RE facelift 04- how much for speedo/instrument cluster clear cover?

Also, drivers rear mudflap.

Need a front bumper same as that too, put my name on next one! :thumb2

:nenau

[cncfabs]

:nenau

Got the mudflap £10 inc p&p

[Gaz-M]

Got the mudflap £10 inc p&p

PMd for payment details :thumb2

[davis8008]

hello mate have you got a rear passengers seat belt and a drivers side headlight for a lwb 2004??

[thecrazycabbage]

Right, immu unit and key set for a '96 (none intercooler, square headlight) terrano.

Numbers on the old one are;
DIESEL 28591 C9911

CONT UNIT-IMMOBILISER

SIEMENS 5WK4 630

Looks like this. As a side note, i see the 125kHz sticker, does this mean i can program in a blipper?

[cncfabs]

Right, immu unit and key set for a '96 (none intercooler, square headlight) terrano.

Numbers on the old one are;
DIESEL 28591 C9911

CONT UNIT-IMMOBILISER

SIEMENS 5WK4 630

Looks like this. As a side note, i see the 125kHz sticker, does this mean i can program in a blipper?

Will check what i have

[zippy656]

New scrapper
http://i137.photobucket.com/albums/q204/stephenhudson/2013-09-20185428_zps7aa4dd89.jpg

Thats miladys one.
Aka cupcake

[cncfabs]

Thats miladys one.
Aka cupcake

Its not

[J66P]

03 plate

[zippy656]

Its not

Cause its not, thats a 2.7.. :doh

Got my glasses on now

[Gaz-M]

Payment sent for mudflap. Cheers