Newby

[Rarche2002]

Hi all I’m new to 4x4s so thought I would get on here and show my project and hopefully there is plenty of knowledge here that can help me out. I’ve just got a 2005 terrano and it has a small rust issue that I’m planning on fixing.
https://uploads.tapatalk-cdn.com/20190128/7451d3a26d27d383e45c3506a4551b41.jpghttps://uploads.tapatalk-cdn.com/20190128/7cf49a5ca6ccb4c62bb06e22eb167697.jpg
Just wondering if anyone has had similar issues and managed to find replacement panels or just made their own

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190128/ff068e5dd5d88aaa8302ee04cef75e25.jpgthis is what she looks like from the outside


Sent from my iPhone using Tapatalk Pro

[solarman216]

Welcome then mate with that kind of rust on an 05 hope you did not pay more than £200 for it, Rick

[Rarche2002]

I paid nothing for it had a friend owe me so I got this got a friend with a garage we’re going to rip all the back out and get welding and plate it up I’m going to use it for getting away on long weekends stick a bed in the back if I don’t want to wild camp in Scotland


Sent from my iPhone using Tapatalk Pro

[solarman216]

Then get welding, it is all doable, Rick

[jims-terrano]

Welcome aboard and I’ve been there done that and bought the tee shirt, as said doable.
I cut out the rot to good metal and simply made plates and welded in. Elty on here has a project thread with photos of how he fabricated a complete boot floor amd wheel arches.
Whilst you are in that area on that year of truck check the rear spring top mounting on the chassis, they rot but can be fabricated. Probably easier to do by cutting boot floor and replacing from above.

[Banshee]

This is what you want a read of!!! Get a cuppa and a new pair of pants though :eek:

http://www.nissan4x4ownersclub.com/forum/showthread.php?t=25528

[Rarche2002]

Yea good read that plenty of tips there for me on the arches I’m planning on getting it all sorted over a couple of days I will take lots of pictures of the progress as I start chopping it all apart [emoji1787]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190130/5be730eb3634944f9f2a56e9d9360f02.jpg

Will this fit on mine?
And I’m after a decent bull bar and rear bar if anyone has anything available [emoji2] I’m completely new to 4x4s so want some goodies for it


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190202/19a0a53c4d234a417786c9f279bf68bd.jpghttps://uploads.tapatalk-cdn.com/20190202/466bca35a86b3dd8103e3ed98ddd1ef8.jpghttps://uploads.tapatalk-cdn.com/20190202/e6539ec6c1dd766333ed98f3e854e356.jpghttps://uploads.tapatalk-cdn.com/20190202/e30ec9ccb8c2a8dd45446a97bd7719ab.jpghttps://uploads.tapatalk-cdn.com/20190202/04dd8722a933c6a27d8799c876a824e6.jpg

Just thought I would share a little update on it only got about 3h in yesterday and got these patched up I will get the back played on Sunday hopefully but we will need to drop the tank out for that as it’s got a small fuel leak


Sent from my iPhone using Tapatalk Pro

[solarman216]

That is a good amount of rot, Rick

[Wallace]

Blimey, that rot makes me feel good about a rusty edge I found today under the fuel pump access plate on my '97 Terrano.

[Rarche2002]

Oh it’s been fun that’s for sure.
Apart from this in the rear it has a small hole in the wheel arch at the front and everything else is solid should get a good few more years out of it from all this.



Sent from my iPhone using Tapatalk Pro

[Rarche2002]

It’s probably going to ask like a dumb question but does anyone know where I can get gear knob and 4wd knob from


Sent from my iPhone using Tapatalk Pro

[solarman216]

It’s probably going to ask like a dumb question but does anyone know where I can get gear knob and 4wd knob from


Sent from my iPhone using Tapatalk Pro

I should have both in my store some place, but have to wait a while as done my back at the mo so inactive, Rick

[Rarche2002]

Ok that’s great I appreciate it I’m in no rush just get better I have a bad back also doesn’t give me much trouble anymore I usually lift something really heavy like a washing machine or something and it stops it from hurting oddly [emoji848]
Just no idea where gears are or 4wd system lol [emoji23]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190203/955f7b64b3176cf23cef093faa686dcc.jpghttps://uploads.tapatalk-cdn.com/20190203/650688cc20e7fa1c63a6c52d338f9c70.jpghttps://uploads.tapatalk-cdn.com/20190203/55c3a3d348ee3ea6e5bc56112ffbb7c3.jpg

Just a bit of progress today just need to do the arch where the filler neck is and a small hole in the engine bay arch and its time for under seal and I think I’m going to do all 3 belts and it sounds like possibly needs a injector then time to turn it into a mini off road camper for trekking through Scotland [emoji2528]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190213/0483d62445f56b7980183a8f66e32230.jpghttps://uploads.tapatalk-cdn.com/20190213/1d6fe378347bbc60f579fc8661d71cb5.jpghttps://uploads.tapatalk-cdn.com/20190213/7837f7abbaafa7cb0ff78085fc4b1c75.jpghttps://uploads.tapatalk-cdn.com/20190213/7a2dc7abe5e7e2749ee68f9b6ee0bf96.jpgwell been busy with work so not had much time managed to get the other arch welded up and have started to insulate the floor. I will hopefully manage to get more done at the weekend


Sent from my iPhone using Tapatalk Pro

[solarman216]

That is serious floor plate work, well done, Rick

[Rarche2002]

Yea ended up using 3mm plate welding the full length around and both arches but it all turned out pretty good. A lot easier because I’m not keeping any of the seats in if I was it would of been a lot harder as the seat belt mounting points were knackered


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190215/421297cc8684e3e98d1fb3cd3a37f7a1.jpghttps://uploads.tapatalk-cdn.com/20190215/51e1c411534f23e3d0f97814539bd0b7.jpghttps://uploads.tapatalk-cdn.com/20190215/efbeb4b84117c4e18dc5d2625290a7f2.jpg

Done a bit today hopefully get more done tomorrow


Sent from my iPhone using Tapatalk Pro

[jims-terrano]

Unfortunately I’ve been ill recently so haven’t kept up to your thread. Well done this is a credit to you, it would of been so easy to just bin the truck. Looking forward to seeing the rest of your progress.

:clap:clap:clap:clap

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190216/197b8216b9bccea5f883284e91b5b877.jpghttps://uploads.tapatalk-cdn.com/20190216/6a7619696ddf71a8a3a8680924258210.jpghttps://uploads.tapatalk-cdn.com/20190216/101671b85363f36c0e9b692c85ef9369.jpghttps://uploads.tapatalk-cdn.com/20190216/13852f11729cd3422b715f3d34a3dd95.jpghttps://uploads.tapatalk-cdn.com/20190216/4551528cabb399cfdefb0b510ae31146.jpghttps://uploads.tapatalk-cdn.com/20190216/84795fa459efe3d73981a63ae6f877bc.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190216/a450b4f335fceaf2a06580c3ebbb7ea8.jpghttps://uploads.tapatalk-cdn.com/20190216/ab9a875f88f2d590ff655733536e6801.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190216/ac2d85a9ea4c03f5dfe18478a659a174.jpg
Well managed to get the piano hinge on the storage compartment just one last bit left and it’s ready to use just need some black carpet and something good to stick it with so it never comes off. As most may of guessed I’m not much of a talker I just like pictures to explain most of what I’m doing


Sent from my iPhone using Tapatalk Pro

[don simon]

Looking forward to the finished article. :clap:clap:clap:thumbs

[Rarche2002]

Me too[emoji23] haha I’m kind of rushing it a bit as I’ve got a busy week at work and we’re away camping on Friday so needs to be useable I won’t have chance to do the carpet but it should still function well.
I’m planning on making something to go on the back door too not sure how at the min. Also has anyone done anything so you can open the back door from the inside.


Sent from my iPhone using Tapatalk Pro

[Lazy-Ferret]

I think that was another Nissan cost cutting exercise, as my 1999 one has the ability to open the door from the inside, and also to lock the door from the inside as well, where as Suz's 2001 doesn't have it.

I have never looked, but maybe the lever is still on the lock to do it.

[don simon]

Me too[emoji23] haha I’m kind of rushing it a bit as I’ve got a busy week at work and we’re away camping on Friday so needs to be useable I won’t have chance to do the carpet but it should still function well.
I’m planning on making something to go on the back door too not sure how at the min. Also has anyone done anything so you can open the back door from the inside.


Sent from my iPhone using Tapatalk Pro
I think Jim has investigated this and the mechanism is still there, just needs digging out and a new way of operating to be sorted out.

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190216/6861838d350a52af3cb4012fc0842e8c.jpghttps://uploads.tapatalk-cdn.com/20190216/361cbd21b741bc4a91452750130b1555.jpg
Which one of these fits mine??

I’ve took the door card off and I can reach in and open it from the inside but it’s not exactly easy I will take pictures tomorrow to show you what I mean.


Sent from my iPhone using Tapatalk Pro

[jims-terrano]

Me too[emoji23] haha I’m kind of rushing it a bit as I’ve got a busy week at work and we’re away camping on Friday so needs to be useable I won’t have chance to do the carpet but it should still function well.
I’m planning on making something to go on the back door too not sure how at the min. Also has anyone done anything so you can open the back door from the inside.


Sent from my iPhone using Tapatalk Pro

It’s do able and I bought all the bits just not had chance to do it yet. The tailgates are indentical in the late and early models or at least only minor differences. The earlier trucks have the interior handle but the inner trim is shaped around the window where the later models aren’t shaped. The latch mechanism is different but is interchangeable. Basically fit the earlier latch and you’ll have the extra push rod which releases it. I was thinking about a push button and a solenoid to open the tailgate from inside so that the interior panel wouldn’t need butchering.

[Rarche2002]

Well my interior panel is getting butchered anyways so that’s fine [emoji23]
https://uploads.tapatalk-cdn.com/20190217/cc2b454082c0f143bc01522ca274e3c4.jpg that’s the latch in question just can’t think how to make it moveable from the inside


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190217/db23791252d60b878a70bc1551215614.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Also I need some of these little clippy thingys https://uploads.tapatalk-cdn.com/20190217/d020a168859cad8bb0b61edaaf1ddc23.jpg that hold this on if anyone has 3 spares or know where I can get them?


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190217/0ccb7303a65bc6ff61fcbaa8004e797d.jpghttps://uploads.tapatalk-cdn.com/20190217/c4bdbaeed0b380bd1f9b14bb2b3013d8.jpghttps://uploads.tapatalk-cdn.com/20190217/119665559ee99371ca1ed74d925a6e45.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190217/19e1fa2e6ab27d53e8a7f6f58891ffc3.jpghttps://uploads.tapatalk-cdn.com/20190217/f7029164587aa001c912e6581102f32d.jpg

Well gave it a good wash it’s ready for a trip away on Friday as I said before just need carpet and it’s all set to go.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Has anyone got a exhaust I need the first bit off the turbo could really do with the full thing but need it cheap as possible as I’m on a very tight budget for this motor.


Sent from my iPhone using Tapatalk Pro

[Wheelie]

Wow, you have done some serious work on the car. [emoji106][emoji106][emoji106]

Sent from my SM-A520F using Tapatalk

[Rarche2002]

Wow, you have done some serious work on the car. [emoji106][emoji106][emoji106]

Sent from my SM-A520F using Tapatalk



Thanks man [emoji106] only been a few days worth of work really been pretty fun making a little off road camper for me and the wife I will get plenty of pictures this weekend to show how we really want to use it [emoji41]


Sent from my iPhone using Tapatalk Pro

[Banshee]

Has anyone got a exhaust I need the first bit off the turbo could really do with the full thing but need it cheap as possible as I’m on a very tight budget for this motor.


Sent from my iPhone using Tapatalk Pro

I have an new unused front down pipe for a LWB in the rafters in the garage but looking at the price of new ones you'd be better off grabbing one of those :nenau

https://www.ebay.co.uk/itm/Nissan-Terrano-II-2-7-TD-TDi-1993-2006-Exhaust-Front-Down-Pipe/352595679084?hash=item521857176c:g:iG0AAMXQbcRQ8Kg 1:rk:7:pf:0

[Rarche2002]

Bargain at the min the flexi bit is hanging so I’m guessing it’s snapped a little and it’s hitting the frame underneath


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Yea right where the flexi is above a crossmember it keeps tapping on that which is quite annoying can’t budge it at all either which makes me wonder if it’s something more wrong not just that bit


Sent from my iPhone using Tapatalk Pro

[don simon]

https://uploads.tapatalk-cdn.com/20190217/19e1fa2e6ab27d53e8a7f6f58891ffc3.jpghttps://uploads.tapatalk-cdn.com/20190217/f7029164587aa001c912e6581102f32d.jpg

Well gave it a good wash it’s ready for a trip away on Friday as I said before just need carpet and it’s all set to go.


Sent from my iPhone using Tapatalk Pro
Best get yourself booked in for this weekender then... http://www.nissan4x4ownersclub.com/forum/showthread.php?t=29806
They're proper chilled out affairs and if you don't fancy laning with your motor, there'll be plentyof spare seats (some spare seats anyway).
We likes to look at storage/camper builds. :clap

[Rarche2002]

I would do but I can’t do that weekend [emoji58]


Sent from my iPhone using Tapatalk Pro

[johnb5177]

Question guys......

This is a great build, my question is.....can you really lower the front seats right down level?

Presumably, the rear seat(s) have to be removed first (no problems there 4 x bolts)......

I have a weekend camping away for a rally, and just need a doss in the car......:thumb2 :nenau

[Rarche2002]

Yea front seats go all the way back but it wouldn’t be comfortable I don’t think I can take pictures if you want when I get home from work


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

I will be honest if your willing to take the back seats out might as well just put a plywood board in the back and put a air mattress on it easy [emoji847] well if your under 6ft anyways I’m 6”2 and just fit in behind the front seats that’s why i decided to recline the front seats all the way back more room for my lanky ass [emoji33]


Sent from my iPhone using Tapatalk Pro

[johnb5177]

:thumb2 Thanks for that, I was thinking of a ply base and mattress, with a back seat taken out, but was not aware the fronts dropped right back...:thumb2

[Rarche2002]

I will get a picture up for ya I’m still at work at the min tho.

Don’t suppose anyone has spare passenger seat and drivers seat mine are a bit knackered [emoji848]I’m willing to collect and pay with beer [emoji481][emoji23]


Sent from my iPhone using Tapatalk Pro

[Banshee]

I will get a picture up for ya I’m still at work at the min tho.

Don’t suppose anyone has spare passenger seat and drivers seat mine are a bit knackered [emoji848]I’m willing to collect and pay with beer [emoji481][emoji23]


Sent from my iPhone using Tapatalk Pro

What pattern are you after? and you'd have to do better than beer I'm afraid mate as I don't drink :doh

[Rarche2002]

Haha damn umm well what do you mean by pattern?? I just have black ones now.
I’m trying not to spend much money as we’re trying to save for a house but still want to get away cheaply


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190218/b8027e929b762c0428f3b71cfb31729d.jpghttps://uploads.tapatalk-cdn.com/20190218/8e8c25a89909fa442e2b95eb703803b7.jpg
Hope that helps with the recliner question


Sent from my iPhone using Tapatalk Pro

[johnb5177]

Yes thank you, it does....very helpful.

With the rear seat, behind the appropriate front seat removed, there is great space for a ply board for a mattress/airbed...... :bow ...:thumb2

[Rarche2002]

Can’t wait to test mine out this weekend?!


Sent from my iPhone using Tapatalk Pro

[Banshee]

https://uploads.tapatalk-cdn.com/20190218/b8027e929b762c0428f3b71cfb31729d.jpghttps://uploads.tapatalk-cdn.com/20190218/8e8c25a89909fa442e2b95eb703803b7.jpg
Hope that helps with the recliner question


Sent from my iPhone using Tapatalk Pro

Why are you swapping those mate? They are in brilliant condition compared to most crap out there, plus that's a very rare pattern to come across too!!! If you find a new set can I buy those? :lol

[Rarche2002]

Well it’s mainly drivers side is knackered on the foam but I basically need a passenger one for an idea I’m toying with I don’t really want to say I would rather do it and surprise everybody but just need a chair for a tester so I don’t mess mine up


Sent from my iPhone using Tapatalk Pro

[don simon]

Well it’s mainly drivers side is knackered on the foam but I basically need a passenger one for an idea I’m toying with I don’t really want to say I would rather do it and surprise everybody but just need a chair for a tester so I don’t mess mine up


Sent from my iPhone using Tapatalk Pro
I bet I know what you're planning... :naughty
I am keen to see. :thumb2

[Rarche2002]

[emoji2958] someone help me out with a seat then [emoji23] it’s gunna get butchered so needs to be cheap please


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190227/3ecad13d995baa16d257c261f9dc68f8.jpghttps://uploads.tapatalk-cdn.com/20190227/c3058c79b58728a769e480a3e8af5aae.jpghttps://uploads.tapatalk-cdn.com/20190227/a25b6e60d943d9a168c0a8ca16a155b8.jpg

Well 700 mile round trip and it didn’t miss a beat


Sent from my iPhone using Tapatalk Pro

[solarman216]

Pic of gear knobs, Rick

[Rarche2002]

Perfect them [emoji4]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Things I need:
Roof rack full length
Front winch kit bumper etc
New exhaust
Couple of light bars for when we’re off track at 10 at night and can’t see anything [emoji23]
Diesel heater even though there noisy as hell
Bigger battery or possibly 2 batteries if I can fit them in the engine bay
Better camp stove setup possibly small gas bottle somewhere
And snorkel


Sent from my iPhone using Tapatalk Pro

[don simon]

Roofrackwise, I got mine from SDV in Clitheroe, I don't have existing bars either, so had to decide between rivnuts or not inviting water into the cabin.
https://farm5.staticflickr.com/4587/38211542635_129a4c2b0b_z.jpg (https://flic.kr/p/21dC9mB)2017-12-16_06-40-09 (https://flic.kr/p/21dC9mB) by Simon Carter (https://www.flickr.com/photos/96036923@N05/), en Flickr
I already had the roof bars and SDV built of there without puncturing the roof. I can easily swap it over to another vehicle if needed.

Snorkel, I'd go for a long one that enters the wing close to the headlamp.

I'm tempted by a diesel heater too, just to take the edge off when entering and exiting the sleeping bag.

My 2nd battery is inside the truck and no problem.

It's all looking good so far.

[Rarche2002]

Roofrackwise, I got mine from SDV in Clitheroe, I don't have existing bars either, so had to decide between rivnuts or not inviting water into the cabin.
https://farm5.staticflickr.com/4587/38211542635_129a4c2b0b_z.jpg (https://flic.kr/p/21dC9mB)2017-12-16_06-40-09 (https://flic.kr/p/21dC9mB) by Simon Carter (https://www.flickr.com/photos/96036923@N05/), en Flickr
I already had the roof bars and SDV built of there without puncturing the roof. I can easily swap it over to another vehicle if needed.

Snorkel, I'd go for a long one that enters the wing close to the headlamp.

I'm tempted by a diesel heater too, just to take the edge off when entering and exiting the sleeping bag.

My 2nd battery is inside the truck and no problem.

It's all looking good so far.



https://uploads.tapatalk-cdn.com/20190227/ee980779fa444dc5a701853988f2aeef.jpg
Like this one?
How does the roof rack attach to these because the rain gutter is under the door frame not on the top like normal

Yea I can get the heaters cheap off my friend so will prob just stick one in

What have you got the battery powering? And what size is it etc so I can see if I need it or just make my mind up on what to do



Sent from my iPhone using Tapatalk Pro

[don simon]

Yes, that's the snorkel. The reason is that under the wing is a strengthening arm which severely restricts any ducting between snorkel and airbox access as per Banshee's photo here.
http://www.nissan4x4ownersclub.com/forum/showpost.php?p=271551&postcount=22

The roofrack sits on the roof bars and rubber feet at the rear. Have a nose through this album.
https://www.flickr.com/photos/96036923@N05/albums/72157648665980018/with/37402712370/

The battery mainly powers the fridge, phone charging and LEDs. It's only 85-95 Ah I think, nothing spectacular, I do have solar back up for longer stationary periods, otherwise it's charged from a split charger and works fine. I've had weekends of fridge cooling from the battery alone, so obviously moving around isn't a problem as it charges as soon as you fire up the motor.
EDIT: What's going on with the site Banshee?

[Rarche2002]

Yes, that's the snorkel. The reason is that under the wing is a strengthening arm which severely restricts any ducting between snorkel and airbox access as per Banshee's photo here.

http://www.nissan4x4ownersclub.com/forum/showpost.php?p=271551&postcount=22



The roofrack sits on the roof bars and rubber feet at the rear. Have a nose through this album.

https://www.flickr.com/photos/96036923@N05/albums/72157648665980018/with/37402712370/



The battery mainly powers the fridge, phone charging and LEDs. It's only 85-95 Ah I think, nothing spectacular, I do have solar back up for longer stationary periods, otherwise it's charged from a split charger and works fine. I've had weekends of fridge cooling from the battery alone, so obviously moving around isn't a problem as it charges as soon as you fire up the motor.

EDIT: What's going on with the site Banshee?



Ahh I see I’m thinking of making my own so could do with seeing the feet as they attach to the truck if you know what I mean.

The snorkel helps loads I will be ordering that today I think [emoji848]

Do you think if I just got a bigger battery for the engine bay it will last powering a fridge for a weekend?


Sent from my iPhone using Tapatalk Pro

[don simon]

You'll have to get a close up of one of the album photos to see the feet.
I wouldn't risk using the starter battery for running a fridge, just in case. I used a jump start battery https://www.halfords.com/workshop-tools/garage-equipment/battery-chargers-jump-starters/phaze-4-in-1-jump-starter?request_type=bestseller for a while (not that one) which worked fine and kept the starter battery for starting.

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190228/fc087b5b8d8a22e5904e819884f6b32e.jpghttps://uploads.tapatalk-cdn.com/20190228/84efe3406547a5672c1129a0dc8fd62f.jpg

3 new belts on for it


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Tomorrow’s a big day I’m going to take the exhaust off and see what I can do to fix it or replace it


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190301/660e763847837ad1811ba30133f1ccc1.jpg
Well I lied [emoji1781] turns out the Audi needed new pads so cracked on with that first https://uploads.tapatalk-cdn.com/20190301/46dc0514ec25dace6122c3496f5439b5.jpg
I think I could of got a few more miles [emoji848]

Then I found a bargain of a leisure battery at Halfords £114 with discount bargain!! So I bought it good for running TVs etc so then I thought where to put it.
https://uploads.tapatalk-cdn.com/20190301/e562ae2ab7b30b5323365076b9cf3004.jpg

So I started moving things https://uploads.tapatalk-cdn.com/20190301/ab1727ffcd74a816d21dfa117df26758.jpg

And more things https://uploads.tapatalk-cdn.com/20190301/859ad27471a44aa7fd42b577fe86cdf5.jpg

Then I thought a bit more.
I need a snorkel but I don’t know how it all works in the engine bay so thought it may get in the way there and also it would mean making new leads etc which I can’t be arsed doing if I’m honest so back out it came. https://uploads.tapatalk-cdn.com/20190301/0d9a5283034c4b8671b5abee7b90c059.jpg
https://uploads.tapatalk-cdn.com/20190301/d5998470bcbb2b99fd6bd6b90616a65d.jpghttps://uploads.tapatalk-cdn.com/20190301/fbfbba28e0fb7ebf87d1348360b34a5a.jpg
I’ve made a temporary metal cradle for it and placed it in there I just need a bit of hose for the power steering reservoir for it to have a new home and it’s going to be very easy to make a split charge system for it and I’m going to make it so there is just a switch that turns the starter battery off and then the leisure battery will power all of the interior electrics.
And then there was this too https://uploads.tapatalk-cdn.com/20190301/6deb887bb25458134977ada489219ecc.jpg think it may be quite dead [emoji88] lol well it will get replaced with the snorkel kit so bonus don’t have to take it out twice.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190301/36861fdbae91cd8a36f07b7a052eaedf.jpg
Oh and I got these in the mail [emoji3][emoji3][emoji3] looks awesome [emoji1547]


Sent from my iPhone using Tapatalk Pro

[Fez_uk]

Does yours have front springs?? :confused:

[Rarche2002]

Does yours have front springs?? :confused:



[emoji848] my Audi?
No it’s the back brakes [emoji23]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190301/7dbb43ff6059376033f43b9039ba25d1.jpg


Sent from my iPhone using Tapatalk Pro

[Fez_uk]

Ah right that pic confused the hell out of me :D

[Rarche2002]

Haha no worries dude [emoji106] can’t wait to get this battery sorted just need to figure out the electric side of it


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190302/32b79a6dc9216a4193617a354bfb2ed4.jpg
Well ordered all this stuff should get me going and keep me busy for a while


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190303/f612f98a331b10bc6b46099cc5d660b6.jpg

Has anyone modified there consoles? I’m thinking of what to do with mine as it’s now a off-road camper so was thinking of getting rid of the centre section and making something different just unsure what. I’m open to suggestions really


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Well not to sure if anyone is interested but managed to re locate my power steering reservoir to the other side of the vehicle [emoji594]
https://uploads.tapatalk-cdn.com/20190304/99d5577b22b5b3fb57f2bce261961582.jpghttps://uploads.tapatalk-cdn.com/20190304/1f7e64ce441535892ac971257290829e.jpg
And now the centre console is black too.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190306/ab0030941b481c10dec3e642bc284311.jpghttps://uploads.tapatalk-cdn.com/20190306/205f3d6803811a5b5ad290817f1bef32.jpghttps://uploads.tapatalk-cdn.com/20190306/d35e9d9cf1ee739d2d85c9a1c507e5c9.jpg
Well roof insulation handbrake gaiter sorted just need to make a new centre console


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190306/f90570d9d920a7e793bad58af8de0b51.jpg


Sent from my iPhone using Tapatalk Pro

[Banshee]

https://uploads.tapatalk-cdn.com/20190306/f90570d9d920a7e793bad58af8de0b51.jpg


Sent from my iPhone using Tapatalk Pro

Niceeeeeeeeeeeeee :thumb2

So where have you relocated your coolant reservoir too then?

[Rarche2002]

It’s going to go on the other side where the washer bottle is loads of room over there hopefully get most of it back in on Friday just need to go pick a roof rack up that I got on eBay too and I think I’m set


Sent from my iPhone using Tapatalk Pro

[Banshee]

It’s going to go on the other side where the washer bottle is loads of room over there hopefully get most of it back in on Friday just need to go pick a roof rack up that I got on eBay too and I think I’m set


Sent from my iPhone using Tapatalk Pro

Very nice, I'll be stealing these ideas perhaps, as I want to do a dual battery setup and having them so close like that keeping cabling to a minimum is beautiful :thumb2

[Rarche2002]

Well I must admit the arches both sides are very rusted like the rest of it I will be chopping them out and welding new ones in this summer after our 2 week camping trip I think and when I do that a lot of stuff will be moved around in the engine bay as I don’t like how tight some of the cables are.
Also I don’t like how big the washer bottle is so I will probably buy a slim one.
And you can’t see it but I’ve actually wired in a charger with a quick connector at the front so I can put the leisure battery on a maintenance charge when we get home or to electric hookup sites.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Well just a little update put a few bits back in the interior of it just need to run wires and put sockets in and it’s nearly ready again and build a few more bits at the back


Sent from my iPhone using Tapatalk Prohttps://uploads.tapatalk-cdn.com/20190308/76e7c0de26df6439a3830f87166d98c0.jpghttps://uploads.tapatalk-cdn.com/20190308/4e3dbfeb2f3af5dad735ac1b704a8fb4.jpghttps://uploads.tapatalk-cdn.com/20190308/504c4fbeb05557def8db8df075be0e13.jpg

[Jay666d]

I've just caught up on this build and I'm absolutely loving it!

Hope that we get to see it on our Easter meet! :thumbs

[Rarche2002]

I’m going to get outside tonight with a few beers and get some wires pulled and hopefully we will have some power in there tonight


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190308/d8ea68716fc1feb95e8ed9cddb53548e.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190309/9d5096ed7dab546b07983a6fa77187e7.jpg

Well still waiting on my fused distribution board [emoji58]


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Ok getting the front wing off is doing my head in how do you move the bumper out of the way to get the bolts for the wing


Sent from my iPhone using Tapatalk Pro

[solarman216]

4 big bolts on the chassis hold the bumper in, think they are about 19mm socket size, Rick

[Rarche2002]

I think I was just getting annoyed as the light was going and wind was picking up [emoji23] want to get it off so I can get the snorkel fitted so I can get the washer bottle back in and expansion bottle too then that’s all the engine bay completely done all that’s left is sort the interior electrical out


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190315/7c69bf3ea09f95324c3dc11ff8f79ded.jpg
Just want black silicone to go along the top edge to tidy it up but I’m happy with it overall I just need a hose to attach to my air box


Sent from my iPhone using Tapatalk Pro

[Banshee]

https://uploads.tapatalk-cdn.com/20190315/7c69bf3ea09f95324c3dc11ff8f79ded.jpg
Just want black silicone to go along the top edge to tidy it up but I’m happy with it overall I just need a hose to attach to my air box


Sent from my iPhone using Tapatalk Pro

Niceeeeeeeee

[Rarche2002]

Well still waiting on parts to get the inside finished up so not really much happened lately so sorry for no updates I do have a few more bits but until I finish the electric side of things I kinda don’t want to do anything else


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190316/51c72d64cb635a1a55e0c2752dc3af99.jpganone want the ashtray assembly?


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190317/0f9cd9f5c4d56118c25ee157fca141f9.jpghttps://uploads.tapatalk-cdn.com/20190317/005968dbfa5a3e5990e6b5c5e485ff0b.jpghttps://uploads.tapatalk-cdn.com/20190317/a7ea33fe6fe9d6dc2400a02d40eac079.jpghttps://uploads.tapatalk-cdn.com/20190317/9a2c633e9bfe5baff13e4ee276ec99db.jpg

Well this as a armrest makes me feel much happier


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190317/273a65437ccf26d3f7860fb6ef80dcfe.jpg


Sent from my iPhone using Tapatalk Pro

[elty001]

Absolutely loving this thread:thumb2
I want to turn my lwb into a camper so keep them idea's coming:thumb2

[Rarche2002]

Well I’m coming to the meet up in April so people can have a look and stuff then just need a new rad as it’s decided to start peeing itself must of happened when I changed the belts. https://uploads.tapatalk-cdn.com/20190317/092aefba6adec33aa4afda3feb79ba4e.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Ok well radiator is ordered hopefully that will be here Tuesday.
https://uploads.tapatalk-cdn.com/20190318/0277363a96dd8f640017e35b89c984dd.jpghttps://uploads.tapatalk-cdn.com/20190318/b02ecfb394192cbbf761c3d216eb9dca.jpghttps://uploads.tapatalk-cdn.com/20190318/adb3755f983256e52e6dacb228005737.jpgfinished up the centre console this morning I will be putting black carpet on the plywood by the way [emoji23] but this is as much as I can get done at the moment as we’re away Friday. I was hoping that I could get it completely done for the meet in April but I don’t think I will have the time.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190319/5d8390d36c89487b988da879089c74fd.jpghttps://uploads.tapatalk-cdn.com/20190319/e4a56249a22368318e3035ed2849125d.jpg well old rad is gone nice fresh one in


Sent from my iPhone using Tapatalk Pro

[jonny]

Nice thread :thumb2. Some great work you have done. I was planning on going for a twin battery on my old one before I sold it so interesting to see how you have done this :thumbs

[Rarche2002]

Well battery set up works perfectly for running a large cool box and a smaller one and charging all accessories and having lights on https://uploads.tapatalk-cdn.com/20190325/c476952335ed5af3b648ab63fb5f27a9.jpg another 800 mile round trip faultless got a big trip at the end of June going to the very top of Scotland for around 10 days should be pretty awesome.
Definitely need a roof rack, awning, some kind of shower setup need to think on that one.
Does anyone know if anyone does the bat wing awnings that would work on the Nissan as the door opens the opposite way to most 4x4s


Sent from my iPhone using Tapatalk Pro

[don simon]

Well battery set up works perfectly for running a large cool box and a smaller one and charging all accessories and having lights on https://uploads.tapatalk-cdn.com/20190325/c476952335ed5af3b648ab63fb5f27a9.jpg another 800 mile round trip faultless got a big trip at the end of June going to the very top of Scotland for around 10 days should be pretty awesome.
Definitely need a roof rack, awning, some kind of shower setup need to think on that one.
Does anyone know if anyone does the bat wing awnings that would work on the Nissan as the door opens the opposite way to most 4x4s


Sent from my iPhone using Tapatalk Pro
Most batwings should be sided. This is my current favourite at the moment.
https://www.camperlands.co.uk/Fiamma-Compass-Swing-Out-Canopy-Awning.html

[Rarche2002]

Most batwings should be sided. This is my current favourite at the moment.

https://www.camperlands.co.uk/Fiamma-Compass-Swing-Out-Canopy-Awning.html



Haha how funny is that I was actually just looking at that [emoji23] I wonder if they make sides for it like the others


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190325/a46f9e2b2f81631c3851ea9039c22984.jpg
Can anyone shed some light if these are the right pieces of exhaust that I need as it’s making a hell of a rattle so I assume that some parts have snapped.


Sent from my iPhone using Tapatalk Pro

[solarman216]

Do not know neither of them specify if LWB or SWB, Rick

[elty001]

Before you go buying a new exhaust just check the exhaust to gearbox mount.
They have a habit of breaking and cause loads of rattling.
Its a U clamp onto a metal bracket with rubber mounts to the gearbox.
If you look under the motor level with the front passenger door you will see it.

[Rarche2002]

Ye that sounds like it could be it feels like it’s banging when changing gears and turning


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Or other option should I just make my own altogether the only problem is I will be doing a lot of miles so I want it to be as quiet as possible


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Ok rolled underneath and found out the flexi isn’t attached at one end so may just order that piece and clamp it together


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Does anyone know the diameter of the standard exhaust so I don’t have to roll under and try and measure again so I can get this flexi bought


Sent from my iPhone using Tapatalk Pro

[Lazy-Ferret]

Does anyone know the diameter of the standard exhaust so I don’t have to roll under and try and measure again so I can get this flexi bought


Sent from my iPhone using Tapatalk Pro

The one I ordered was Klarius Flexi Repair Pipe D 51.5mm L 290mm

Have a read of this thread you might find it is hard work, and not worth the effort. I still ended up having to take the front section off to weld it, as the clamps fowled the cross member. It's only £10 more for the complete front section.

http://www.nissan4x4ownersclub.com/forum/showthread.php?t=28885&highlight=exhaust+flexy

[Rarche2002]

Yea will probably just whip the whole exhaust off and weld a new one up as it’s quite rusted up anyway


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Can anyone pop a picture on of the roof rack clamps please just a close up so I know which ones to buy.
The ones that run under the door along the rain gutter.

[elty001]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F 183559457875
Is this the type you are after:nenau

[Rarche2002]

I was looking at them but they just don’t look like the right shape but if that’s what everyone uses then I will get them


Sent from my iPhone using Tapatalk Pro

[elty001]

Never used that brand before.
Thule do them but you have to buy the foot pack and bars separately.
The set i had on my old Terrano where made by mont blanc.
10556

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190331/015044b9ca58a0eb061e72368f034f62.jpghttps://uploads.tapatalk-cdn.com/20190331/8c802b017b0780a2222768eb95ce1d91.jpg
I was really hoping something like this would go on but my guess is the mounting feet are wrong
I need something substantial as I’m getting a 270% awning for it so I want plenty of hold in wind etc

Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Ok rolled underneath and found out the flexi isn’t attached at one end so may just order that piece and clamp it together


Sent from my iPhone using Tapatalk Pro



https://uploads.tapatalk-cdn.com/20190331/499927076995e04d01aef3981c2e557f.jpgor possibly this



Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Hi all I’ve not been on much just been busy with work I’ve picked this up and was just wondering how I can go about attaching it [emoji848]https://uploads.tapatalk-cdn.com/20190427/53f3608713a9472390438f2345df7de9.jpghttps://uploads.tapatalk-cdn.com/20190427/12ba0aabaac989d5284db923fdb46aa4.jpg


Sent from my iPhone using Tapatalk Pro

[Banshee]

Hi all I’ve not been on much just been busy with work I’ve picked this up and was just wondering how I can go about attaching it [emoji848]https://uploads.tapatalk-cdn.com/20190427/53f3608713a9472390438f2345df7de9.jpghttps://uploads.tapatalk-cdn.com/20190427/12ba0aabaac989d5284db923fdb46aa4.jpg


Sent from my iPhone using Tapatalk Pro

I brought one of those for my Maverick but it was more the A-Bar style than the full wrap around. I used to have a nightmare with mine with the brackets rusting away and would constantly need welding back together and also used to cost me valuable ground clearance when I was on 31's on the Maverick

[Rarche2002]

Well it got fabricated today just made new mounting brackets with flatbar and a big hammer [emoji23] https://uploads.tapatalk-cdn.com/20190428/54f13d6a3a62f3f295d9526574e7180c.jpg
Also sorted the exhaust flexi out welded one side and clamped the other https://uploads.tapatalk-cdn.com/20190428/33e8de9ce5fb9e8dd1e9c28ede309dee.jpg as I didn’t want to tackle the bolts that go to the turbo as they look pretty damn crusty


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Well I’ve ordered a load of goodies can’t wait to get them all on the car I’m just going to leave it at that until fitted [emoji1787]it’s going to be good


Sent from my iPhone using Tapatalk Pro

[macabethiel]

Wow that's some hard work done to your motor - I love to see such personalisation.

[Rarche2002]

Yea I’ve done a fair bit now just need to get last couple bits sorted then strip the engine bay ready for welding new front arches in I think I will possibly make my own front bumper at that point too but that’s next year most likely I wanna get some use out of it now.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190507/a62f56d0a0dee8913e59bb7e24ef03f7.jpghttps://uploads.tapatalk-cdn.com/20190507/32164c68a7149db50b419c44522db440.jpg

Gets me to some really good camping spots normal cars can’t.


Sent from my iPhone using Tapatalk Pro

[Blocky10]

Jeeeealous :bow

[Wallace]

That looks a peaceful place to bbq steak!

[Banshee]

Jeeeealous :bow

What he said :eek: :(

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190508/5c63be59c45b934db6ae8ab6db9b8faf.jpg like these


Sent from my iPhone using Tapatalk Pro

[Banshee]

https://uploads.tapatalk-cdn.com/20190508/5c63be59c45b934db6ae8ab6db9b8faf.jpg like these


Sent from my iPhone using Tapatalk Pro

Natural stones as well, wow :clap

[Rarche2002]

So much dead wood around for the taking didn’t need to bring anything just a fire striker [emoji106][emoji108] can’t wait to go again in a couple weeks just need to get the roof rack on and make the brackets is the hardest part at the moment as I want to use the rain gutter that runs under the door


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190512/2b68cf409b7cba6f577748de04b11049.jpghttps://uploads.tapatalk-cdn.com/20190512/d75ef24ec327561057df28d3c8f93426.jpg

Oh I’ve had a busy weekend


Sent from my iPhone using Tapatalk Pro

[jims-terrano]

That looks great, do you mind me asking how much it was and where from :thumbs

[Rarche2002]

https://uploads.tapatalk-cdn.com/20190512/be5bf13339de7bb7e107eddf578865ab.jpg
That first one on the old google
Roof rack was 300£ ish I think [emoji848] cant remember it’s all been sat in the garage waiting for other bits then I put it all on together can’t wait to get a few more bits I’ve actually done a bit on the inside too but I forgot to take pictures so I shall update tomorrow sorry guys.



Sent from my iPhone using Tapatalk Pro

[don simon]

That awning looks a really useful piece of kit, especially as it can be opened by just one person. Pefect for lunch stops or camping inside the truck/cooking out of the rear.
I can't wait to see this truck in the flesh.

[Rarche2002]

I will get to a meet up at some point when the stars align and there is a blood moon I promise [emoji23][emoji23] just so damn busy at the min with everything


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Well had her out in the sun yesterday went to 2 spots https://uploads.tapatalk-cdn.com/20190515/bd963120e4deaebe3ad12af7a0ee66f2.jpghttps://uploads.tapatalk-cdn.com/20190515/a3ccc8828d517b33d5e7db9444639fc4.jpghttps://uploads.tapatalk-cdn.com/20190515/dc92e6c7f048aa9b4df6f2f9f72724d2.jpg
Had a nice chilled day.

Are there any meet ups after July??


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Yea so bought this for lights [emoji848] https://uploads.tapatalk-cdn.com/20190522/a51f2720917e74e8547b60093674256f.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Hi guys been a while since I’ve been on had some bad news about the truck big fail on mot this year so thinking of breaking her if anyone needs anything https://uploads.tapatalk-cdn.com/20191117/6faf2d73eaa0d8734a631f46dadb9111.jpg


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

I engine runs sound just had new belts and rad this year I genuinely don’t want a lot for the bits on her I would rather people use bits to keep there terranos going so just make me offers if you can come collect that would be great as I don’t really have the time to remove and post as I’m at work a lot lately it’s got 5 alloys if anyone wants them 4 off road tyres still a bit of life left in them and just a normal tyre on the spare I can get pictures of tread depth etc if anyone is interested I’m located near Preston. https://uploads.tapatalk-cdn.com/20191117/c6157c5e45f84863eba0653ed1146d37.jpg
I will be keeping the rack and awning as I’m planning on getting a land cruiser possibly 80series if I can find a relatively clean one.


Sent from my iPhone using Tapatalk Pro

[jims-terrano]

Have you got any photos of the corrosion that they have marked in yellow?

Chances are it’ll be places we have seen before on here and easily repaired but often a garage will quote several arms and legs because they don’t want to do the work. You have done such a lot of work it seems such a waste to let it go now.

All the other repairs look pretty simple and standard.

[Rarche2002]

No not managed to get under and have a look I never pay for garage work fortunately as he’s a good friend and I usually just smoke some brisket and he helps me do the tricky stuff with the cars [emoji23].
I would get under today but it’s peeing down [emoji43] he said something about there being a crack across the front crossmember?? Does that sound right [emoji848] but if I’m honest the truck as a whole still drives fine [emoji23][emoji1787] but I just haven’t got the time to sort it especially not this side of Christmas and as we love to get away in the winter to camp in Scotland I’m in need of a quicker solution which would be to buy another 4x4 swap all the rack and awning over and get out and about when we can.


Sent from my iPhone using Tapatalk Pro

[Wheelie]

No not managed to get under and have a look I never pay for garage work fortunately as he’s a good friend and I usually just smoke some brisket and he helps me do the tricky stuff with the cars [emoji23].
I would get under today but it’s peeing down [emoji43] he said something about there being a crack across the front crossmember?? Does that sound right [emoji848] but if I’m honest the truck as a whole still drives fine [emoji23][emoji1787] but I just haven’t got the time to sort it especially not this side of Christmas and as we love to get away in the winter to camp in Scotland I’m in need of a quicker solution which would be to buy another 4x4 swap all the rack and awning over and get out and about when we can.


Sent from my iPhone using Tapatalk ProI've got a nice patrol for sale of your interested

Sent from my Pixel 3a using Tapatalk

[AdrianC]

Wonderful project, nicely done :clap:clap:clap

[Blocky10]

I've got a nice patrol for sale of your interested

Sent from my Pixel 3a using Tapatalk

Do we have a price for this patrol you speak of?
My brother has been looking for one:thumb2

[Wheelie]

Do we have a price for this patrol you speak of?

My brother has been looking for one:thumb2I had it up for 6995 with all the extras on it which have now been taken off with the exception of the roof rack and roof tent. The tent will come off and it's going for a new mot tomorrow. With all the work that's been done over the last 18 months I would have thought 5k would be a good price

Sent from my Pixel 3a using Tapatalk

[Blocky10]

I had it up for 6995 with all the extras on it which have now been taken off with the exception of the roof rack and roof tent. The tent will come off and it's going for a new mot tomorrow. With all the work that's been done over the last 18 months I would have thought 5k would be a good price

Sent from my Pixel 3a using Tapatalk

That'll be stretching the budget too far. Cheers though:thumb2

[Rarche2002]

I’m in the same boat as above mate I’m afraid and I think I’ve got my mind made up on a land cruiser. Cheers for the info on yours tho it does look like a clean motor too I’m sure someone will snap it up at that price.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

Does anyone want anything off my terrano before I scrap it???
I’ve got a set of wind deflectors if anyone wants some


Sent from my iPhone using Tapatalk Pro

[jims-terrano]

Is your truck really so bad that you have to scrap it?

[don simon]

I had it up for 6995 with all the extras on it which have now been taken off with the exception of the roof rack and roof tent. The tent will come off and it's going for a new mot tomorrow. With all the work that's been done over the last 18 months I would have thought 5k would be a good price

Sent from my Pixel 3a using Tapatalk
Hang on! What's going on here? I don't recall a RTT, do I? What did you get? And what's up with the Patrol?

And for Rarche2002, I'm in a similar position, I've got an expensive welding bill to look forward to and considered/am considering scrapping the Terrano and getting a Patrol (or something else newer).
If I can get the pieces I need, I think it'll be worth spending on the Terrano, I'll never get my money back, but you never will with a car, unless it's an F40... I should have a good base for a car that will last for years to come.
If you are stripping, let me know hoe the inner wings look. :p

[Banshee]

Does anyone want anything off my terrano before I scrap it???
I’ve got a set of wind deflectors if anyone wants some


Sent from my iPhone using Tapatalk Pro

Still got the split charge system?

[Rarche2002]

Still got the split charge system?



Keeping that for the next rig mate sorry [emoji52]



Sent from my iPhone using Tapatalk Pro

[elty001]

What are you asking for the wind deflectors??
I have fronts but broke my rears.
are they the heko ones??

[jims-terrano]

I wish I had room on my drive as I’d buy it to fix up. I don’t think mot fail sheet is that bad and looking at boot repairs you did it shouldn’t be a bad motor.

[Rarche2002]

What are you asking for the wind deflectors??

I have fronts but broke my rears.

are they the heko ones??



[emoji23] sorry broke ur rear
Dunno mate whatever 15£?


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

I wish I had room on my drive as I’d buy it to fix up. I don’t think mot fail sheet is that bad and looking at boot repairs you did it shouldn’t be a bad motor.



No it’s sound really just the welding jobs I just haven’t got it In me to cut both front arches and the front crossmember out I need something that’s ready to go for next year as we are buying a house so all of my time will be going on that.


Sent from my iPhone using Tapatalk Pro

[Rarche2002]

If people want me to strip it I prob could but if I buy a new rig I’m going to need the space on the drive


Sent from my iPhone using Tapatalk Pro

[elty001]

[emoji23] sorry broke ur rear
Dunno mate whatever 15£?


Sent from my iPhone using Tapatalk Pro

Sounds good,any chance of a pic and postage cost to DE55 7JY?

[Rarche2002]

Sounds good,any chance of a pic and postage cost to DE55 7JY?



Yeah I will get the picture up later they are heko ones forgot to say I will just do them 15 all In mate not fussed about postage just no point me having any of these bits as I’m hopefully getting a patrol in the new year when I can get my house bought.


Sent from my iPhone using Tapatalk Pro