Starting problems

[Ian Stuart]

Hi
I have a 1999 Nissan Terrano 2.7tdi, I recently did a off the body restoration to my car replaced all the parts with new ones. My problem is that i cannot get the car to run or even turn over. I plugged in a computer to the plug and received the following engine codes.

Code 86: EGRC SOL/V A (0 starts)
Code 88: SOL/V(EGR B&THROT) (0 starts)
Code 88: SOL/V(EGR B&THROT) (0 starts)

Can someone please tell me what these faults are and how to fix them.

The car ran before i started work on it and i have not done anything to the engine.

1 Other thing i cannot find the cam/Crankcase sensor I see a plug for it on the loom but cannot find it on the engine.

Please help

Regards

Ian

[Madmark]

Cam\crank sensor if its Bosch is on gearbox bell housing

[solarman216]

if it is Zexel it is on the timing case, and the engine will not run if disconnected, but it should turn over even if you have immobilizer problems it will turn over, so guess you have missed some wires someplace, Rick