View Full Version : whos breaking a 2.7 tdi?
exosteve
03-04-2015, 16:25
im looking for please.
an injector lift sensor.
a drivers side indicator and headlight:kissy
I think rick was breaking one , not sure if it was a td or tdi tho
jims-terrano
03-04-2015, 16:38
You'll need to give a bit more info on the headlamp and indicator too. Best of luck cos the no 1 injectors are like hens teeth.
Assuming its your 2001 truck, has it got the silver headlamps or the type with like a dark mask behind the glass. Sorry didn't explain very well.
Where is lift sensor as I've got a complete 99 tdi engine
Needle lift sensor is in no 1 injector.
Before you jump the gun Mate get that fuel filter changed and check out the fuel lines and primer pump for leaks as that can cause the cause air in the system and give the same code.
Needs to be the bosch one.
exosteve
03-04-2015, 18:21
This headlight and indicator
This headlight and indicator
:eek: What happened?
I have injector with wires coming out of it worked fine before engine was removed if ya interested. I've no idea what it's worth
exosteve
03-04-2015, 19:22
A house came at me from nowhere:augie
exosteve
03-04-2015, 19:25
I have injector with wires coming out of it worked fine before engine was removed if ya interested. I've no idea what it's worth
Deffo interested buddy.
Going see my mechanic this weekend for a coffee and chat.
And talk him into switching the eml off.
As for what it's worth about a tenner:augie:augie:D.
Kin nearly 200 new
jims-terrano
03-04-2015, 19:48
A house came at me from nowhere:augie
Can anyone remember the Jasper Carrot sketch about insurance claims.
Could of been worse but Im sure it doesn't make you feel any better.
AlexD333
03-04-2015, 20:01
Dude your not sure you need the injector yet.
Get a bit of clear hose and check for air bubbles, perhaps replace the small hose before fuel filter :thumb2
Bosch number one injector just cost me £177.60.
solarman216
03-04-2015, 20:59
Bosch number one injector just cost me £177.60.
Should have called me first,Rick
Bigbunny2007
03-04-2015, 21:57
I rang round a few scrap yards and got one for a tenner, the engine was for export so he just wanted me to replace it with my old one :thumb2
You will need a socket with the cut out in it to pass the wire through to remove them. Good luck
exosteve
03-04-2015, 22:06
Sounds like a good plan to buy one anyway.
If it's same as mine pm me a price mark please.
Or rick please.
solarman216
03-04-2015, 22:08
I rang round a few scrap yards and got one for a tenner, the engine was for export so he just wanted me to replace it with my old one :thumb2
You will need a socket with the cut out in it to pass the wire through to remove them. Good luck
Nah I use a ring spanner, Rick
Bigbunny2007
03-04-2015, 22:56
Take a multi meter with you a good no 1 injector will read 105 ohms I think :thumb2
And a spanner!! :lol
Ok will have a check tomorrow to make sure it's Bosch as I haven't got a maff with it. Any idea what it would be worth peeps as have no idea
solarman216
03-04-2015, 23:13
Ok will have a check tomorrow to make sure it's Bosch as I haven't got a maff with it. Any idea what it would be worth peeps as have no idea
OK if Bosch ohms will be around 100, if Zexel it be infinity or no ohms, Rick
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.