PDA

View Full Version : Nissan terrano regulus automatic

newfy
15-03-2015, 21:22
Hi guys I am looking for some help please. My terrano is running fine but
Idle speed of the engine is 650rpm and vibrating really bad
I have tried to adjust the pot and the coiled spring on the pedal
But not had much joy.
Is there anything I can plug in and adjust it electronically
I like the Jeep but if I can't get this sorted I'm just going to sell it
Its really doing my head in
jonela
15-03-2015, 22:18
As I think i said in one of your previews posts I had this problem and try'd everything to cure it ,to no avail. I eventual took it in to a local main dealer and they told me it was the injector pump that needed replacing, it ran for another two months like this and then just died, no response from pedal at all,just tick over 650 ish. I try'd every thing to fined the problem with much help from members on here but no luck, so sold it spares or repair in the end.
newfy
15-03-2015, 22:50
Hi thanks for the reply I am hoping its not the pump
Apart from tickover its running great
When the air con is on the engine speeds up
And when the quick heat button is on the engine speeds up also
I have put a cable tie to hold the pedal down slightly and its kinda
Working OK but would like to get it sorted
Banshee
15-03-2015, 23:33
Hi thanks for the reply I am hoping its not the pump
Apart from tickover its running great
When the air con is on the engine speeds up
And when the quick heat button is on the engine speeds up also
I have put a cable tie to hold the pedal down slightly and its kinda
Working OK but would like to get it sorted

Is this fly by wire?
macabethiel
16-03-2015, 08:23
Is there anything in the download site workshop manual they have a r3mR manual that applies to the PR50 platform like yours ?

There is a comprehensive diagnostic section in the manual as I recall.
jonela
16-03-2015, 08:50
You could get a consult interface off ebay and hook it up to ECUTalk see if that picks up anything on the read outs, The guy who bought mine said he thought he had traced it back to some sort of solenoid in the pump, PM davenclaire, I know he has had his Bosch pump in bits.He may know if there is one
briggie
16-03-2015, 18:23
yep as already said .... look in the downloads for the r50 manual , and browse the diagnostics section :thumb2
newfy
16-03-2015, 21:28
Is this fly by wire?

Yes mate its fly by wire
newfy
16-03-2015, 21:30
Is there anything in the download site workshop manual they have a r3mR manual that applies to the PR50 platform like yours ?

There is a comprehensive diagnostic section in the manual as I recall.

Hi buddy I have tried to download the manual from the site
But when it downloads it won't open the file
newfy
16-03-2015, 21:33
yep as already said .... look in the downloads for the r50 manual , and browse the diagnostics section :thumb2

Hi I have downloaded the manual but can't open the file
briggie
16-03-2015, 22:03
Hi I have downloaded the manual but can't open the file

its a self extracting zip file afaik
newfy
16-03-2015, 22:31
its a self extracting zip file afaik

Hi buddy I'm not really a PC person so I am
None the wiser could you explain how I go
About it in simple terms
briggie
17-03-2015, 17:35
im sure r1cho will explain better than me :thumb2
Lazy-Ferret
17-03-2015, 19:35
Hi buddy I'm not really a PC person so I am
None the wiser could you explain how I go
About it in simple terms

Are you downloading it onto a PC? it probably won't work on a Tablet or phone.

Basically, you download it, where it will be saved on the PC. You then run the file, which will self extract into a folder on your PC. If on a later Windows software you may have to click on "More Info", and press the "Install anyway" button.

Then go to the folder it extracted to... most likely "downloads\Terrano R50" and double click on fwd.pdf or idx.pdf.
Lazy-Ferret
17-03-2015, 19:40
To make things a bit easier, I have put the section on engine control up on my web site, so you should be able to read it on anything...

http://www.lazy-ferret.co.uk/NissanForum/ec.pdf

I will take this off again after a week, which should give you time to download it.
newfy
17-03-2015, 22:00
To make things a bit easier, I have put the section on engine control up on my web site, so you should be able to read it on anything...

http://www.lazy-ferret.co.uk/NissanForum/ec.pdf

I will take this off again after a week, which should give you time to download it.

Thanks for your help m8
I have downloaded the manual through your link
Lazy-Ferret
17-03-2015, 22:21
Thanks for your help m8
I have downloaded the manual through your link
That's not the whole manual, just the one part on the Engine Control, there are many more sections, but too big to load with out compacting, which takes you back to the original problem. Hopefully that is the bit you need though.