Seat air bag resisters

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Madmark

Madmark

Well-known member
Supporting Member
Joined
Aug 13, 2014
Messages
1,087
Reaction score
0
Hi I'm wanting to put bucket seats upfront but my seats have air bags in them what's the best way to get around this if possible
 
Bloody brilliant!!!!! I have a set of mint seats that I had off James but they don't have side airbags so I was having this same dilemma.

It sounds kind of soppy I know but I really want to fit them because they were out of Marvin (Maverick) that was written off and have seen some adventures!!!!
 
I could be wrong but got told the air bags in the seats had only one wire going to them:confused: would love to be able to disconnect my seat air bags as I fancy a pair of recaro seats out of a corsa VXR as the fabric on some is almost the same as my seats:thumb2
 
Sweety said:
I could be wrong but got told the air bags in the seats had only one wire going to them:confused: :thumb2
Click to expand...

According to the SRS wiring diagram there are 2 wires, 3 if you include the safety ground/shield.
Pins 1 & 2 will require the 1R8~2R2 resistor fitted.
The squib connector on the airbag/seat side should automatically short the pins together when unplugged to minimise the risk of accidental firing once the seat is removed.

Shown in section RS-35:
 

Attachments

  • rs-35.jpg
    rs-35.jpg
    34.9 KB
You must log in or register to reply here.

Similar threads

G
Original Seats fabric
Replies
0
Views
38
Groquete
G
S
Stowaway ate my seat belt
Replies
19
Views
111
jims-terrano
J
G
Cabin heater radiator
Replies
1
Views
41
solarman216
solarman216
Flying Torquewrench
Removing seats and MOT.
Replies
7
Views
5K
panelbeater
P
L
Terrano RV
Replies
8
Views
72
solarman216
solarman216

Latest posts

Back
Top