Tyre pressures and a wheel brace

[PALY]

Can someone tell me the tyre pressures for my Nisson Mistral and also where i can buy a wheel brace .It never had one when i bought it . thanks

[Deleted Member]

hi paly,on my T2 the pressures are on the drivers pillar,and have you looked under the back seats! :smile:

[rustic]

Can someone tell me the tyre pressures for my Nisson Mistral and also where i can buy a wheel brace .It never had one when i bought it . thanks
Tyre pressures depend on tyre size, type of vehicle, there are plenty of threads on this one, the last one I think discussed tyre pressures while towing. Have a browse under Caravanning and Mechanical forums.
Re wheel brace, I use the standard vehicle one ( located under rear offside passenger seat ) but use a 13/16" socket to torque them up.
However mine are alloys, it may differ for steel ?
There are plenty of breakers about, see threads or look on ebay.
Best regards, Rustic

[Terranosaurus]

I use the standard vehicle one ( located under rear offside passenger seat ) but use a 13/16" socket to torque them up.

You might be better off using a 21mm socket.

I carry a 24" breaker bar with both 19 (for the steels) and 21mm (for the alloys) deep impact sockets for it, they are deep enough to mean I don't need an extension and I'll never have trouble with not being able to undo a nut nor will the other half. I find Impact sockets wear better in the long run for this sort of use.

If I'm going on a trip or greenlaning I now chuck my battery impact driver in, not had to use it yet but if I did it would cut the time taken to cchange a wheel in half.

[PALY]

:smile: Thankyou Rustic , Humming bird and Steve, your reply's have helped me a lot.