PDA

View Full Version : Front +2 shocks

AlexD333
08-07-2014, 21:24
Can anyone point in the right direction?

+2" front shockies :thumb2
Adz
08-07-2014, 21:26
Only for the rear ;)
Sweety
08-07-2014, 21:26
IIRC +2" front shocks aren't needed standard length ones are fine but the guy's with lifted trucks will know better
AlexD333
08-07-2014, 21:28
IIRC +2" front shocks aren't needed standard length ones are fine but the guy's with lifted trucks will know better

Are you saying I should just get some new standard ones! Extra length is not needed? :nenau
Adz
08-07-2014, 21:34
"the guy's with lifted trucks will know better"

Mine is :rolleyes: as were my others :augie

Are you saying I should just get some new standard ones! Extra length is not needed? :nenau

You can get them but YOU DON'T need them

"makeitfit" aka Pete has rose jointed the front end of his & has done away with the idler for a lhd power steering pump :augie

MAJOR MODDING !
AlexD333
08-07-2014, 21:50
Mine is :rolleyes: as were my others :augie



You can get them but YOU DON'T need them

"makeitfit" aka Pete has rose jointed the front end of his & has done away with the idler for a lhd power steering pump :augie

MAJOR MODDING !

Yup, sign me up for one of them then :lol
Adz
08-07-2014, 21:53
Talk to Pete when his back from the Irish sea but put aside some wedge & time off work to get it done :augie
R1cho
08-07-2014, 22:12
yep dont need longer on front, mines had the idler mod put on and will be being rose jointed at some point, one of the many jobs left to do which will be done regardless of if i sell it or not
AlexD333
08-07-2014, 22:17
Has anyone got a pic comparison to help me out here :nenau I'm struggling to grasp this rose joint mod?
R1cho
08-07-2014, 22:43
you get the track rods, drag link and drop links rose jointed
elty001
08-07-2014, 23:10
You can fit them but as it's been said they are not needed.
Even with the front end lifted you will still only ever have the same travel on the ifs set up.
You just loose some droop travel when torsions are wound up.
I'm going for a standard length up rated shock when I have the funds.
Banshee
09-07-2014, 00:34
I still need washers for my rose joint drop links :augie
elty001
09-07-2014, 06:37
I still need washers for my rose joint drop links :augie

so do I mate.
the batch I had made where no good as he only put a 10mm hole in them and I asked for 13mm.
that busy at work I had totally forgot:doh
will get on it mate.
exosteve
09-07-2014, 08:55
I fitted +2 0n mine:D needed or not:D