Speedchip for sale

[Kishada]

Selling off the few mods on the Terrano since it is also for sale.

This is the standard Speedchip that retails for E129
I'm sure a few others will chime in to confirm that these make a pleasant difference to the way it drives. More intelligent (5 wires) than the Donatorstore version which I originally bought and ended up smashing with a hammer!
The one thing it has been left wanting since I've removed it is uphill grunt!

£65 posted Royal mail 2nd class signed for
http://i6.photobucket.com/albums/y220/Kishada/IMG_2634_zps10995023.jpg
http://i6.photobucket.com/albums/y220/Kishada/IMG_2635_zps576986d5.jpg

[elty001]

Will it also wire into the hitachi/zexel fuel pump:nenau
If so I am interested

[Kishada]

Will it also wire into the hitachi/zexel fuel pump:nenau
If so I am interested

I'm afraid not, this is for the Bosch units.

[elty001]

ok mate cheers:thumbs

[puddle hoppers inc.]

hi, interested in this but how do i tell what pump i have??? its an 03 plate. cheers, mike.

[zippy656]

hi, interested in this but how do i tell what pump i have??? its an 03 plate. cheers, mike.

4 wires to maf bosh pump

3 wires to maf not bosh pump

[puddle hoppers inc.]

4 wires to maf bosh pump

3 wires to maf not bosh pump

cheers zippy, i shall take a peep :thumb2

[zippy656]

cheers zippy, i shall take a peep :thumb2

No worries,

[Kishada]

hi, interested in this but how do i tell what pump i have??? its an 03 plate. cheers, mike.

Hi Mike, on age, unless it's a 3L, chances are it will be a Bosch pump.

[zippy656]

hi, interested in this but how do i tell what pump i have??? its an 03 plate. cheers, mike.

4 wires to maf bosh pump

3 wires to maf not bosh pump

Have a look..

[puddle hoppers inc.]

just got a look, its a 4 wire maf :thumb2
i will take it please if you could pm me a paypal address etc? i assume its an easy job to fit? looks a bit tight down the side of pump . cheers, mike.

[Kishada]

just got a look, its a 4 wire maf :thumb2
i will take it please if you could pm me a paypal address etc? i assume its an easy job to fit? looks a bit tight down the side of pump . cheers, mike.

Will PM now.
Eaay job to fit, all wiring done up top!

[-=Alex=-]

I'm also interested if it becomes available by any chance

[Banshee]

I'm afraid not, this is for the Bosch units.

Thats me out then :doh

[puddle hoppers inc.]

money now zapped over, any problems please get in touch, cheers :D