fabrication mods

[exosteve]

lots of people have done lots of mods on here.
without thinking about the future of other peoples needs.

This is a request to all members to please do paper templates of all steel fabrication parts and store them for other members:kissy

people have made rock sliders,bumpers,winchtrays. and other interesting parts.

this is all valuable information.

I will as from now make paper templates for my files to send to anyone wanting to copy:D

I will be making a plywood prototype winch tray to build a bumper around asap.
and I will make a full detailed paper print off full size template thingy.
or post you paper cut out templates or summat:thumb2

a bit later on I will be making plywood front and rear bumpers for templates:D

can everyone else please think of this in future mods:kissy

I would like a paper template for steering reinforcement right now:bow

[Sweety]

Great idea Steve:thumb2 I've not really got any plans as such at the min for body mods etc but as I like messing about with my stereo system i'll make up some paper templates for the speaker baffles (adaptors) when I redo them & anything else:augie

[makeitfit]

I have the rear bumper timber template somewhere :thumbs

[exosteve]

that will save me and a few others a lot of time.
you know what its like trying to do any mod at all wether it be wood or steel please made templates.
how many peeps need a stereo template to remove original head for a start

pete I would love the bumper plates. even on cheap as chips printer paper celotaped together:D

[Fez_uk]

Good idea, but it aint gonna happen ;)

[exosteve]

prob not but I do my bit:thumb2

[elty001]

already on it mate.
when I get round to doing the rock sliders the draughtsman at work is going to do me a set of drawings.
I also asked about winch bumpers and when a prototype is made he will also do the drawings for them.:thumbs

[bud]

lots of people have done lots of mods on here.
without thinking about the future of other peoples needs.

This is a request to all members to please do paper templates of all steel fabrication parts and store them for other members:kissy

people have made rock sliders,bumpers,winchtrays. and other interesting parts.

this is all valuable information.

I will as from now make paper templates for my files to send to anyone wanting to copy:D

I will be making a plywood prototype winch tray to build a bumper around asap.
and I will make a full detailed paper print off full size template thingy.
or post you paper cut out templates or summat:thumb2

a bit later on I will be making plywood front and rear bumpers for templates:D

can everyone else please think of this in future mods:kissy

I would like a paper template for steering reinforcement right now:bow

The bar i have built.....

http://www.nissan4x4ownersclub.com/forum/picture.php?albumid=209&pictureid=947

isn't legal in the UK how ever it would be okay for a trailer queen. Will endevor to take all the measurements etc and post them up. maybe Admin could make a section for these drawings.

[CliveG]

Do any of you guys know if you can get templates or kits for ally chequerplate panels for a lwb Patrol GR Y60 similar to the ones you can get for Landrovers?:thumbs

[exosteve]

im hopin get some time on my truck this weekend. priority for me though is take dog for a big walk.
if I get time I will make a wooden winch tray although I aint got a clue how to do it yet:confused:

although I remember stinka putting some pics up of a wooden template somewhere:nenau anyone find them:nenau

[Banshee]

A good one off the top of my head might be a tracing round the outer and internal vanes of a 2.7 water pump as when I did mine a knackered my gasket and had to make a new one from gasket paper which took forever to make a copy :doh

I was being ultra careful

[Fez_uk]

The bar i have built.....isn't legal in the UK how ever it would be okay for a trailer queen.

Looks fine to me ;)

[makeitfit]

The bar i have built.....

http://www.nissan4x4ownersclub.com/forum/picture.php?albumid=209&pictureid=947

isn't legal in the UK r r

ERM, why not :nenau As long as there is a winch in it no probs :rolleyes:

[Barrbeast]

I think the bullbar/nudgebar part causes issues with the anti-bullbar laws but provided the vehicle was registered before 2006 you're fine as the laws aren't retrospective which is why my ARB safari bar is all good.

Anyone wanting to put it on a 2006 on vehicle could just leave off the nudgebar part.

[elty001]

is this the one you mean stevehttp://www.nissan4x4ownersclub.com/forum/showthread.php?t=19069&highlight=winch+tray