Mig Welder Wanted
- Thread starter Tomas
- Start date
Help Support Nissan 4x4 Owners Club Forum:
Not entirely sure what I need!
I know gassed is better than "No Gas" but not sure about amps etc.......
I just spotted what looks like a good buy on "Pre-Loved"
Waiting for the guy to tell me whether its 3x phase or single as it didn't say in the ad!
http://www.preloved.co.uk/adverts/show/107855436/mig-welder.html
puddle hoppers inc.
Well-known member
- Joined
- Dec 26, 2012
- Messages
- 1,041
i use a gasless mig and find it copes with most stuff, good penetration even on 3mm box. gasless is better if you are working outside as the gas shroud isnt blown away as on gas migs(ive used both for many years). hope this helps.
mike.
mike.
Fez_uk
Well-known member
- Joined
- Sep 13, 2010
- Messages
- 5,641
Seems so, Pub gas bottles can be hard to come by now as most places charge rent on them.
And proper stuff is expensive to buy.
Fez_uk
Well-known member
- Joined
- Sep 13, 2010
- Messages
- 5,641
Yes but for what he's asking its still a good deal.
Being that full bottles of gas cost generally £50+ each unless you are very good friends with a pub landlord and his supplier don't charge rent.
Then it has a gauge(s) to which can be £20+
Being that full bottles of gas cost generally £50+ each unless you are very good friends with a pub landlord and his supplier don't charge rent.
Then it has a gauge(s) to which can be £20+
