View Full Version : 31" mud tyres and 8j rims
baker1988
29-03-2013, 19:16
Right here it goes need to free up some pennies towards my mission to get some 35's fitted:thumbs so i have these up for grabs
they are only a couple months old rims could ideally do with a lick of paint tyres have been on 1 pay n play day and all in all covered 200 miles
coloured lines are still visible
couple of pics will get over to the terrano tomorrow and take a couple of pics for each corner
They are 15" 10.5 15
£350
http://i185.photobucket.com/albums/x236/littlejohn_boy/20130218_093218_zps1abf4063.jpg
http://i185.photobucket.com/albums/x236/littlejohn_boy/20130209_164001_zpsb520999a.jpg
makeitfit
29-03-2013, 19:18
35s you say :sly Brave man, are you ready with your angle grinder :naughty
baker1988
29-03-2013, 19:21
35s you say :sly Brave man, are you ready with your angle grinder :naughty
angle grinders at the ready just bought a new welder too :sly
let the fun begin i say
makeitfit
29-03-2013, 19:22
I've done 35s on mine, you will need a lot of work :augie
Let me know if you need any help :thumbs
baker1988
29-03-2013, 19:25
I've done 35s on mine, you will need a lot of work :augie
Let me know if you need any help :thumbs
its going to take me a while but im prepared for it :augie
ok thanks if i get stuck ill give you a shout :thumbs
makeitfit
29-03-2013, 19:32
its going to take me a while but im prepared for it :augie
Ha ha I look forward to another member of the 35 club :thumbs
You'll need to power up the engine too as the gearing is awful otherwise :augie
You'll need the steering toughened up too :rolleyes:
Good luck :cool:
baker1988
29-03-2013, 19:38
Ha ha I look forward to another member of the 35 club :thumbs
You'll need to power up the engine too as the gearing is awful otherwise :augie
You'll need the steering toughened up too :rolleyes:
Good luck :cool:
Pump and turbo has been tweeked today :) what a pain getting to the pump though its going to be off the road for a while now Im going to try and tackle the steering mod myself see how I get on I like a challenge
makeitfit
29-03-2013, 19:42
Is yours TDi ? If so what pump mods are you upto ? :naughty
Is yours TDi ? If so what pump mods are you upto ? :naughty
I'm interested to know this also :)
I've got a steering box sat in the garage but illness has meant I've not been able to get a grinder on it yet :( will do soon as tho
baker1988
29-03-2013, 19:52
Is yours TDi ? If so what pump mods are you upto ? :naughty
Yes its the TDI not sure what to do and how much power I want yet will be looking more into it when I get these 35's fitted ive had a quick scout round the engine and im pretty sure its capable of a pretty decent amount of hp :) :sly more will be revealed in time :lol
Yes its the TDI not sure what to do and how much power I want yet will be looking more into it when I get these 35's fitted ive had a quick scout round the engine and im pretty sure its capable of a pretty decent amount of hp :) :sly more will be revealed in time :lol
Oh, I thought u said u'd tackled it today and it was a pain to reach
makeitfit
29-03-2013, 19:59
Can't wait :) I thought though that the ecu controlled pump was not the answer to extra omph on the TDi. There's some electrickery wizzadry that can help but too techy for me :o So went down the modded turbo and LPG injection route. Power chip helps get fuel in earlier but cant help get more out than the pump can handle , if you see what I mean.
Custom injectors though :naughty
Come on spill the beans :sly
baker1988
29-03-2013, 20:06
Can't wait :) I thought though that the ecu controlled pump was not the answer to extra omph on the TDi. There's some electrickery wizzadry that can help but too techy for me :o So went down the modded turbo and LPG injection route. Power chip helps get fuel in earlier but cant help get more out than the pump can handle , if you see what I mean.
Custom injectors though :naughty
Come on spill the beans :sly
Ive not yet looked too much into it but a compensator and advanced timing is involved maybe a expensive mod but I will start a thread when it comes to doing the work
makeitfit
29-03-2013, 20:10
Ive not yet looked too much into it but a compensator and advanced timing is involved maybe a expensive mod but I will start a thread when it comes to doing the work
I'm nursing a semi :splif
baker1988
29-03-2013, 20:22
I'm nursing a semi :splif
Erm dont suppose you know the size of the standard plunger do you? I know a trol is 10mm can be upgraded to 11 and even a 12 with modification i believe but cant find the info without taking it off :lol
makeitfit
29-03-2013, 20:27
No I don't but I do have an IP in the garage :rolleyes: I guess you want me to strip it now :lol
baker1988
29-03-2013, 20:31
No I don't but I do have an IP in the garage :rolleyes: I guess you want me to strip it now :lol
No dont worry its not to important just gathering abit of info at the moment I have a couple im picking up next week to disect :lol
baker1988
09-04-2013, 22:46
£300 ovno :thumb2
davis8008
10-04-2013, 07:06
hello mate could you send me your poast coad so I can see how far away you are please
baker1988
15-04-2013, 13:50
last few days available before they go on ebay :sly
anyone interested ?
baker1988
22-04-2013, 09:00
Bloody non payer on ebay
Grab a bargain £250 no offers
Bargain of the week lol
Would be very interested but don't want to have to drive to Worcestershire.
Would I have to do much to fit these to my LWB?
Cheers Steve
baker1988
22-04-2013, 19:38
Would be very interested but don't want to have to drive to Worcestershire.
Would I have to do much to fit these to my LWB?
Cheers Steve
Need to lift it 2inches
Take mudflaps off
And maybe shave a tad off inner sills I never had to but I hear some people do
davis8008
22-04-2013, 22:24
I'll give you 250 for them mate if your willing to wait a cupple of weeks? my motors off the road at the moment so can't pick them up for a cupple of weeks
davis8008
22-04-2013, 22:28
unless your coming near Peterborough any time soon? ?
baker1988
22-04-2013, 22:59
unless your coming near Peterborough any time soon? ?
No plans of coming up that way soon bud.
They will probably still be available just message me when you have the funds
Not looked into courier costs yet as I usually prefer people to see what there buying in person saves hassles :thumbs
Cheers :thumb2
baker1988
30-04-2013, 16:23
I have PMd you mate!
Replied
Are these still for sale? Is so, could you get a price for a courier please?
Right here it goes need to free up some pennies towards my mission to get some 35's fitted:thumbs so i have these up for grabs
they are only a couple months old rims could ideally do with a lick of paint tyres have been on 1 pay n play day and all in all covered 200 miles
coloured lines are still visible
couple of pics will get over to the terrano tomorrow and take a couple of pics for each corner
They are 15" 10.5 15
£350
http://i185.photobucket.com/albums/x236/littlejohn_boy/20130218_093218_zps1abf4063.jpg
http://i185.photobucket.com/albums/x236/littlejohn_boy/20130209_164001_zpsb520999a.jpg
these still for sale???
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.