to do list

[exosteve]

Whats on your to do list?.
I have got to.
get the wheels off,check brakes,do diff oil,waxoyl everywhere, fix drivers door,do a service,change tyres for summat a bit beefy,change oil,filters,relace exhaust rear section,.
but I think first job is to get the mud flaps off,and get the front bumper off to get it all protected.
im going from the ground up.(almost. iI dont want spend 600 on tres to find the car is a shagger

[96terrano]

Umm, I have, rust to sort 'not much, heter matrix to change, roof lining to swap out, intercooler to fit, drivers door to sort, underside to paint, neon lights to fit and a few other mods to do:D

[zippy656]

Fit new 12N and 12S

Fit new high level reverse light

Get sills welded

Fit puddle lights

[wildbri]

Hi Mr Zip, if your terrano came without a high level brake light you will find that the wiring is there under the cover so its not has big a job as you might expect, bri

[clivvy]

hmm..well!!

get front cross member welded
get sills welded
steering tracked
MOT
fit rear bump stop
fix noisy rear door
er....thats it really, other than that, shes great!

[clivvy]

Hi Mr Zip, if your terrano came without a high level brake light you will find that the wiring is there under the cover so its not has big a job as you might expect, bri

absolutely right. I have one of those universal lights, and i was going to fit it. took everything apart and found the wiring (temp wired up to test and works). even the moulding has a part to pop out to fit the light.

[zippy656]

Hi Mr Zip, if your terrano came without a high level brake light you will find that the wiring is there under the cover so its not has big a job as you might expect, bri

Reverse light not the break light

[Lincs Mav]

Got my CB to fit and maybe a suspension lift and new wheels tyres soon.

Cheers Gav

[jims-terrano]

HeHe I have a to do list to but never get time. I'm too busy with voluntary work, have been out all day today since 7:45. One day I'll get there.

Still having a great time just the same:thumbs

[danielj]

Strip rust and repair rear floor pan/sills, adjust front wheel bearing, change front drop links and rear bushings, fix loose front light and side lamp, smoothen out dent on corner of front wing, push out dent on rear passengers panel, paint a scratch on back passenger door, fix or replace seat belt on third row of seats, remove, clean and paint rear bull bars, get tyres changed--then get it tested and sell it.

[melissachels]

erm where do i start.....

all the arches need replaced,
seat belt need reattached,
front & rear bumpers need sorted as the waggle about,
cv joint,
fix fuel gauge (if i can),
service hubs,
change all oils,
replace drop link & mounting as the mounting has beggered off to where no one knows :nenau
sills replaced
2 body mounts repaired as one is not attached :doh
windows changed over to manual (if i can find them, fed up with them breaking)
all shocks & springs replaced
steering idler & poss the whole bar
thermostat


think thats all good thing i pay parts only
:thumb2

[exosteve]

It seems we all have a lot of work to do!
Unfortunatly I have to pay a mechanic for a lot of my jobs as im usless with cars.at least he doesnt charge much lol.
steve

[R1cho]

erm lets see

Need to mod the transfer lever because it wont go into 4low since doing the bodylift :augie :lol

Re-index the torsion bars

Put roof crate on

and get a decent set of roof lights

[makeitfit]

erm lets see

Need to mod the transfer lever because it wont go into 4low since doing the bodylift


STILL :eek: you'll be pinching Ryans crown soon for the longest job title :lol
Re roof lights: Fez is looking at importing some VERY competetivly priced LED bars:sly