PDA

View Full Version : Clunk


JCH
01-02-2013, 11:28
My Terrano 2003 purchased three months ago, has an odd clunk when in full lock to the left.No problems if full lock not used, and no problems to right full lock. I can only describe it as a clunking sound.If I do a left turn and do not use the full lock there is not a problem. Any Idea's. Other than that it runs like a dream.
I live in France and have it booked into the local garage next week for investigation.,but They are not Terrano experts.
Normal driving is excellent, the problem is only full lock to the left.

Oh yes an excellent Club, very glad that I joined.
Thanks

clivvy
01-02-2013, 11:29
well, id be 99% sure its the bump stops. give them all a good dollop of grease and that should fix it.

there are two per wheel.

do that, and cancel your garage appointment.

stinka
01-02-2013, 11:55
Grease your lock stops

On hub and bottom arm, they are contact points that determine your full lock

JCH
01-02-2013, 13:07
Can you tell a very non mechanical person where these bump stops are located

JCH
01-02-2013, 13:29
Are lock stops and bump stops the same thing

theron
01-02-2013, 13:55
All details here: http://www.nissan4x4ownersclub.com/downloads/workshop/wk1.pdf

Just try greasing them first before you think about replacing.

AD Ent
01-02-2013, 14:02
Turn your wheels out and have a look from the front, you'll spot em. Just look like metal door stops. They grind against each other so thick grease sorts it. Or stop short of full lock like I do.
Mine is like yours, Left grinds Right is fine, for now.

JCH
01-02-2013, 15:59
Thanks for the inspection info.Have looked and the plastic caps are broken or missing. Will order up new caps, fit and grease and it should solve the problem.until then I will drive at 90% left lock.

Fez_uk
01-02-2013, 16:19
Just grease them, no need for the caps.

JCH
01-02-2013, 17:15
If I just grease them will they still rub metal to metal when I am at full lock.
Surely the plastic caps stop that happening , or am I wrong.
These are the lock stops, are the bump stops different.

Fez_uk
01-02-2013, 17:28
Lock stops, Just stops the noise. It's ok for the metal to rub.

rustic
01-02-2013, 18:05
Lock stops, Just stops the noise. It's ok for the metal to rub.

Nice new plastic caps will be great for a year or so, then wear through to the metal anyway, so save some time and money, grease them every 3 months, leave them alone other than that.
The stops are in a " high wash area" ie the grease will always get washed off in the rain.

The suspension is tough enough anyway.
JUST avoid being on full lock when bouncing over rocks and things.
I always go to full lock, then back off a bit, I have never heard mine clunk since following my own advice.:thumbs

If it ain't broke.... don't fix it.:thumbs

Terranical
01-02-2013, 18:33
Nice new plastic caps will be great for a year or so, then wear through to the metal anyway, so save some time and money, grease them every 3 months, leave them alone other than that.
The stops are in a " high wash area" ie the grease will always get washed off in the rain.

The suspension is tough enough anyway.
JUST avoid being on full lock when bouncing over rocks and things.
I always go to full lock, then back off a bit, I have never heard mine clunk since following my own advice.:thumbs

If it ain't broke.... don't fix it.:thumbs
What he said - I grease my steering stops every three months or so, never had a peep out of them in three years.
The bump stops are the big rubber and steel things above the rear axle (think there's some on the front too), they are a limiter to avoid excessive suspension travel.

JCH
01-02-2013, 18:49
Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

briggie
01-02-2013, 18:52
puis-je s'il vous plaît un peu de graisse pour graisser ma bosse s'arrête sur mon terrano?

jims-terrano
01-02-2013, 19:05
No need for a grease gun for this job, just a plain tub of grease and a plastic bag. Get a helper to standby. turn steering to full lock, it's easier to get at the leading edge lock stop and trailing edge of opposite side. Remove lid, place bag on hand, place said hand covered in bag into the grease and scoop nice small blob on fingers. Then smear over the lock stops on opposing sides. Now ask your helper to turn wheels to opposite lock and start all over again.

Job done, regrease when you hear the noise. Mine need it once or twice a year thats all.

rustic
01-02-2013, 19:08
Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!
You don't need a grease gun for the steering stops, a finger full will do.

Don't put grease on the bump stops, they are a rubber type compound.

If you haven't got a grease gun, you will need one to grease the UJ's on the prop shafts anyway.

best regards,
Rustic

laurieash
01-02-2013, 19:10
Off to the shops in the morning to buy a grease gun.

Do I grease the bump stops the same.

It's a bloody good job I am a member of the Club. My French is not excellent and I cannot imagine going into the shop and asking for a grease gun for my Bump Stop,!!!!

Dont buy a grease gun just use your finger blob on:thumb2

Terranical
01-02-2013, 19:18
puis-je s'il vous plaît un peu de graisse pour graisser ma bosse s'arrête sur mon terrano?
I'm impressed monsieur!

stinka
01-02-2013, 19:23
Just put up with the noise tbh

I greased mine once, about a week later the water had washed the grease off

JCH
01-02-2013, 20:06
Mercy buckets!!!!!!!!!!

clivvy
01-02-2013, 20:22
i greased mine once about three year ago, hasnt clunked since:thumbs

JCH
01-02-2013, 20:27
Finally,do I grease it all round or the tip only.

zippy656
01-02-2013, 20:33
http://www.nissan4x4ownersclub.com/forum/album.php?albumid=34&pictureid=166 here how i get mine sorted

clivvy
01-02-2013, 20:37
Finally,do I grease it all round or the tip only.

pal, dollop it on the end-it will appear obvious when you look as it will be worn, but i just gave it a nice dollop and its been fine ever since. I just used good old fashioned multipurpose grease.

JCH
01-02-2013, 20:47
Thanks everyone.will grease up and report back

zippy656
01-02-2013, 20:48
Thanks everyone.will grease up and report back

Be good idea to do the bump stops while your at it

rustic
01-02-2013, 20:53
i greased mine once about three year ago, hasnt clunked since:thumbs

Did you ever get a new battery for your hearing aid?:nenau:lol:lol

JCH
01-02-2013, 20:54
Someone above say's not to grease the bump stops,what do you mean

rustic
01-02-2013, 20:57
Someone above say's not to grease the bump stops,what do you mean

Grease on rubber is a no no, as I said before.
Don't know why you would do it.:nenau

JCH
01-02-2013, 21:01
Be good idea to do the bump stops while your at it

What did the post mean

CaptLimey
01-02-2013, 22:14
Hi Jon

Nothing to do with steering stops (not bump stops) - you've had enought good advice already - but as a fellow Francophile, where in this fair land are you?

I'm in 46800 St Pantaleon, about 25km west of Cahors. If you're close perhaps we could swap Terrano tales over 'aperos'?

Regards CL

JCH
02-02-2013, 08:53
We are in La Vendee. Department 85. Quite a long way from you I guess.
How long have you been here. We retired here in 2005. I wonder how many members live over here

JCH
02-02-2013, 13:05
Thanks everyone.Greased up this morning.Noise on full lock GONE.
Jon

Terranical
02-02-2013, 14:09
Thanks everyone.Greased up this morning.Noise on full lock GONE.
Jon
There you go, that's your £10 membership fee back with interest! :clap

zippy656
02-02-2013, 14:51
Thanks everyone.Greased up this morning.Noise on full lock GONE.
Jon

Great news!

Best £10 youll spend