View Full Version : no one wants it
bladeliker
29-01-2013, 16:09
how much would you buy my terrano second edion for ????
iv seen them on ebay Yes better quility.
the only problem is about this is the fan belt thats it all the rest iv put into it.
i think if no ones buys it buy tommorow night ill rip of the new CAT and strip most the stuff that my father wants and scrap the rest at least i can make the 500 quid up my self.
there is nothing wrong with the terrano accpet for the pics
http://www.nissan4x4ownersclub.com/forum/showthread.php?t=17720
spiderpig37
29-01-2013, 17:41
Stick it on ebay 500 quid buy it know if thats what you want for it:nenau
tbh m8 after lookin at the pics you would probably get more for it if you broke it, it needs a lot of work done, and seeing the condition of them arches means the sills will need doing too (unless you already had them done) the pictures also show no spare (do you have this and its just been taken off) under the bonnet also needs some welding near the bulk head which is a pig of a job to do.
bladeliker
29-01-2013, 23:46
tbh m8 after lookin at the pics you would probably get more for it if you broke it, it needs a lot of work done, and seeing the condition of them arches means the sills will need doing too (unless you already had them done) the pictures also show no spare (do you have this and its just been taken off) under the bonnet also needs some welding near the bulk head which is a pig of a job to do.
no the bulk head is welded with sheet metal and then covered in filler and sprayed it was a big job and it passed as well the mot isn't due until june/july any ways.
the inside of the bonnet it not an mot fail, i was advise that i can weld a sheet metal all over the hole or cut the rust out filler it up and spray it.
if it was near to the front springs then yes as you no the car is in two parts chassy and the other part lol i cant remember :doh
the spare wheel is a steel rim and its off because its weights to much and it needs the a tyre as its nearly balled.
the only thing that would be needed doing is the fuel pipes and end exhaust has came away after the box
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.