PDA

View Full Version : 265 70 16

zippy656
21-04-2012, 21:22
hi guys,


this size fit a standard T2 Lwb?
stinka
21-04-2012, 21:23
yes, with no mods

so will 265 75 16, but with mudflaps off and spacers on rear or offset rims, and hammer on front inner wings
R1cho
21-04-2012, 21:28
yes, with no mods

so will 265 75 16, but with mudflaps off and spacers on rear or offset rims, and hammer on front inner wings

hammer?? just do a 2" lift much better than hittin ya truck with a hammer
briggie
21-04-2012, 21:33
hi guys,


this size fit a standard T2 Lwb?

will fit my truck mate if you dont want them lol
stinka
21-04-2012, 21:34
depends if its just milimeters you could get away with just a few taps of the knocking stick rather than shelling out on a lift kit
zippy656
21-04-2012, 21:46
so that's a no then

im running 245 70 16, will stop at that

unless 255 70 16 will fit
briggie
21-04-2012, 21:48
so that's a no then

im running 245 70 16, will stop at that

unless 255 70 16 will fit

ive got kumho 245/70/r16 on now
stinka
21-04-2012, 21:52
so that's a no then

im running 245 70 16, will stop at that

unless 255 70 16 will fit

yes, they will fit mate :nenau
makeitfit
21-04-2012, 22:06
so that's a no then

im running 245 70 16, will stop at that

unless 255 70 16 will fit
No, that's a yes , they will fit. They're about 1/2 an inch smaller than 31s :thumb2 So you should even be able to keep your flaps :clap:D
Fez_uk
21-04-2012, 22:33
hammer?? just do a 2" lift much better than hittin ya truck with a hammer

still will need doing if they are muds
Kamsin
22-04-2012, 10:59
hammer?? just do a 2" lift much better than hittin ya truck with a hammer

(Guess who did a lift on his truck last week then) :augie
makeitfit
22-04-2012, 13:42
He's still doing it though, isn't he :lol
zippy656
22-04-2012, 19:34
will keep eyes open for some 255 70 16 now then
stinka
22-04-2012, 19:52
No mate ffs, u want 265/70 16 !!!

:nenau:augie
zippy656
22-04-2012, 20:00
No mate ffs, u want 265/70 16 !!!

:nenau:augie

i don't want to bash it to make um fit
makeitfit
22-04-2012, 20:02
i don't want to bash it to make um fit

You wont need to bash it :doh
You MAY need a trim of the bumper plastic and possibly the mud flaps , that#s all :thumbs
It may also be an odd size to find a 255 , 265 more common and therefore cheaper :)