Spill Pipe for TDi wanted

[makeitfit]

HELP ME PLEASE I seem to have erm customised my spill off pipe and so need a new standard one :augie
Anybody got one pleeeeeaaaaasse? Urgent as the truck's going nowhere fast at the mo :(

[(RIP) PLANK]

there's loads on ebay if you know the correct diameter, if you find out post it on here! :thumb2

[makeitfit]

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit :rolleyes:
I'll get a pic :thumbs

[Fez_uk]

is there nothing in tanygroes?

[(RIP) PLANK]

Ah not the rubber bit, I'm after the metal pipe that joins all the injectors before the rubber bit :rolleyes:
I'll get a pic :thumbs

I see, serious customisation error then? :augie

[makeitfit]

I see, serious customisation error then? :augie

Damn spanner monkey :lol Spot the mistake :augie
http://i667.photobucket.com/albums/vv36/daudwpsyn/2012-03-13102757.jpg

[makeitfit]

is there nothing in tanygroes?
Nope they're modified in exactly the same way :doh

[Fez_uk]

ask this guy he seems to always have terrano stuff, although what you needs on a engine and most are sold with them?

http://www.ebay.co.uk/itm/Maverick-Terrano-front-drivshaft-/320864323610?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ab501081a#ht_500wt_1415

and:

http://www.ebay.co.uk/itm/97-Terrano-2-Maverick-2-7Td-Pair-Rear-Tailgate-Hinges-/190642749113?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c63317eb9#ht_500wt_1183

[(RIP) PLANK]

if it's not snapped at a joint, couldn't you put a sleeve over it? even as a temporary fix?

[extreme-4x4]

id go with the sleave too, even rubber would do for a bit .....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too :augie

[(RIP) PLANK]

try our member shropshireterranobreakers, he has a few breaking, I can PM his mobile number if you like. A very helpful and reliable young man :thumb2

[Adz]

As above, just sleeve it with fuel hose :thumbs

Main dealer is your best bit as that's where I got mine :thumbs

[Patch]

You could try your local plumber (if he is a gasfitter as well) to weld a stub on the ring, then you could join it with fuel hose as been suggested

[makeitfit]

Thanks guys it's broken right on the fitting so nothing to sleeve :doh
I did consider brazing it if all else failed but horah cnfyfasbs has come up with the goods :clap

[makeitfit]

.....im guessing something was rubbing ? how did the intercooler hold up, or has that got a hole in it too :augie
Waiting for the silicone elbows to turn up, nothing rubbing. this all came about as I was servicing the injectors, but No1 wouldn't undo (properly) :doh

[Adz]

Are the trust twist & snap :lol

I've NEVER done that :augie :augie :augie :o :o :o :doh :doh :doh