where to get arb rose links

[Madmark]

My arb links on front are dead so want rose joint them. So any links etc where to get them etc

[RJL Services]

not sure but someone on here was making them i think it was bigbunny but stand to be corrected

[Banshee]

Originally Posted by Madmark

My arb links on front are dead so want rose joint them. So any links etc where to get them etc

Elty sent me mine IIRC, McGill Motorsports may have some as that's where I got my misalignment washers from after I misplaced the original set

You been looking at my Instagram again

[Madmark]

Had loud bang and lots of grinding lol also cv boot need doing

[russell.huffer]

I bought mine off ebay, just be aware o what threads you get as all jap cars use metric fine 1.25 pitch but you can get m12 in 1 and 1.5 pitch.

Kind regards

Russell.

[Banshee]

Originally Posted by russell.huffer

I bought mine off ebay, just be aware o what threads you get as all jap cars use metric fine 1.25 pitch but you can get m12 in 1 and 1.5 pitch.

Kind regards

Russell.

Post of the day!!!!!!! Was just about to say this
Had the same problem when my brother stole a nut from my tie rod end kit in the shed for his Jimny and I went out to get a new one and still haven't as yet found one

[elty001]

as long as the thread pitch of the rose joint matches the bolt it doesn't matter as you are not using any of the original nissan parts.
nissan use the fine pitch metric thread banshee,what bolt are you after as i have got a selection and i might have one.

[Madmark]

Woo woo anti roll bar link in after not tie rods

[Banshee]

Originally Posted by elty001

as long as the thread pitch of the rose joint matches the bolt it doesn't matter as you are not using any of the original nissan parts.
nissan use the fine pitch metric thread banshee,what bolt are you after as i have got a selection and i might have one.

It's the nut I'm looking for that go on the tie rod ends, got a brand new set in the garage and my brother has stolen one as the on on his Jimny was damaged

[elty001]

Originally Posted by Banshee

It's the nut I'm looking for that go on the tie rod ends, got a brand new set in the garage and my brother has stolen one as the on on his Jimny was damaged

will have a look for you tonight when i get back from work

[elty001]

Originally Posted by Madmark

Woo woo anti roll bar link in after not tie rods

you have to buy the parts seperate to make the drop links.
McGill racing for the rose joints and misalignment washers,milners for the bushes and a local fasteners supplier for the nuts and bolts.

[Madmark]

Ok cheers elty any idea what I need as in sizes and threads etc

[Banshee]

Originally Posted by elty001

you have to buy the parts seperate to make the drop links.
McGill racing for the rose joints and misalignment washers,milners for the bushes and a local fasteners supplier for the nuts and bolts.

Yeah, the longest part about this mod was sourcing all the parts!!!! The misalignment washers took agessss to come as well

Then there was getting the 60mm Shanked Bolts
Everywhere I rang didn't even know what a shanked bolt was, hardware stores were looking at me like I was an alien, then I tried a local Hardware Store in Warwick and he just fetched them out the back, apparently a common bolt for a landy application too

[Madmark]

I just need rose joint specifics as can get any type of bolt at local Jonny junks lol

[Banshee]

Rose Joints
http://www.ebay.co.uk/itm/M12-Female.../160529417760?

Misalignment Spacers
http://www.mcgillmotorsport.com/m12-...pack-of-4-390/

M12 60mm Shanked Bolts
http://www.ebay.co.uk/itm/M12-x-60-S...sAAOxypNtSjR6s

Get this ordered at the same time
Front Anti Roll Bar and Droplink Bushes
http://www.milneroffroad.com/nissan/...ll-kit-front-1

Do some measuring though mate and get yourself a selection of repair washers as well, I can't be sure that the shanked bolts were 60mm but 90% sure they were